Get real exam questions for JN0-102 Junos, Associate (JNCIA-Junos). 100% Free.
P.S. Practical JN0-102 resource are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tXs1-OwsFM0v3hCoM3oPqZl0IS9wPyNjNew Juniper JN0-102 Exam Dumps Collection (Question 8 - Question 17)Q1. Which two statements are correct about firewall filters in the Junos OS? (Choose two.)A. Firewall filters are stateless.B. Firewall filters are used to control routing information that is e
P.S. Real JN0-102 dump are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tOoR73rpM_qDSmJkbsqP3ACMtoFLOlMzNew Juniper JN0-102 Exam Dumps Collection (Question 8 - Question 17)Question No: 8You have configured logging to the console port but are uncertain of the impact to the device with troubleshooting.In this scenario, which command would allow you to minimize the impact?A.
P.S. Simulation JN0-102 pdf are available on Google Drive, GET MORE: https://drive.google.com/open?id=1E1Dh477bEbi_EiAhCJBuRsk2_SYWpZfENew Juniper JN0-102 Exam Dumps Collection (Question 6 - Question 15)Q1. Which two commands is used to validate the syntax of a configuration without applying the configuration?A. commit confirmedB. commit synchronizeC. commit checkD. commit and-quitView AnswerAnswe
Q1. You have received a default route through BGP from your ISP and you want to redistribute it into OSPF. Which method will accomplish this? A. Apply an export policy to OSPF that exports the default route. B. Apply an import policy to OSPF that imports the default route. C. Apply the default-network command to OSPF. D. Apply the redistribute-igp command to BGP. View AnswerAnswer: A Q2.
Q1. Which statement is true about a routing table? A. It contains routes learned dynamically only. B. It finds the best path to each destination by using a modified shortest-path-first calculation. C. It contains only active BGP routes. D. It contains all accepted routes to all destinations. View AnswerAnswer: D Q2. Which command is used to enable access to J-Web using HTTPS? A. set syst
Q1. Which word starts a command to add configuration on a Junos device? A. get B. set C. put D. show View AnswerAnswer: B Q2. -- Exhibit --[edit policy-options] user@router# show policy-statementpolicyABC { term A { from { protocol rip; route-filter 192.168.1.0/24 longer; } then accept; } } [edit protocols ospf] user@router# show exportpolicyABC; area 0.0.0.0 { interface
Q1. Which operating system do Juniper Networks MX Series routers use? A. IOS B. MX-OS C. UNIX D. Junos OS View AnswerAnswer: D Q2. -- Exhibit --[edit firewall family inet filter COS-CLASSIFIER] user@router# show term MANAGER { from { source-address { 192.168.200.0/25; } destination-address { 100.100.100.1/32; } } then { forwarding-class expedited-forwarding; accept; } } ter
Q1. Which two can be used to create and apply an export policy that advertises static routes to RIP neighbors? (Choose two.) A. set protocols rip export demo B. edit policy-options policy-statement demo set term 1 from protocol static set term 1 then accept C. edit policy-options policy-statement demo set term 1 from protocol static accept D. set protocols rip group internal export demo Vie
Q1. Which two external authentication servers are supported for administrative access to a Junos device? (Choose two.) A. RADIUS B. LDAP C. ACE D. TACACS+ View AnswerAnswer: A,D Q2. Which user authentication method is supported by the Junos OS as a last resort alternative? A. TACACS+ B. RADIUS C. local user database D. enable password View AnswerAnswer: C Q3. What is a route filte
Q1. What is the central processing component of the forwarding plane? A. PFE B. RE C. Junos OS D. forwarding table View AnswerAnswer: A Q2. How many host addresses are available in the /28 network? A. 6 B. 14 C. 28 D. 30 View AnswerAnswer: B Q3. -- Exhibit --... if-exceeding { bandwidth-limit 1m; burst-size-limit 3k; } then discard; -- Exhibit --The configuration in the exhi
Q1. -- Exhibit --[edit] user@router# show | compare [edit protocols ospf area 0.0.0.0] -interface ge-0/0/0.0 { -disable; -} [edit protocols ospf] area 0.0.0.0 { ... } + area 0.0.0.1 { + interface ge-0/0/0.0; + } -- Exhibit --Referring to the exhibit, what are two differences between the active and candidate configurations? (Choose two.) A. The ge-0/0/0 interface was added to the ca
Q1. What is the default protocol preference for OSPF internal routes? A. 10 B. 15 C. 150 D. 160 View AnswerAnswer: A Q2. Which command will display the active configuration? A. user@router> show configuration B. user@router# show C. user@router> show system configuration D. user@router> show system commit View AnswerAnswer: A Q3. What are two ways that packet fragmentatio
Q1. Which statement is true regarding the Junos OS? A. Each process runs in its own protected memory space ensuring that one process cannot directly interfere with another. B. Processes share memory space but use separate ASICs so that one process cannot directly interfere with another. C. A central processor called the IP2 Chip dynamically assigns memory as process needs fluctuate. D. The me
Q1. In dotted decimal notation, what is the equivalent of 11010101 01000010 01111111 11000010? A. 213.66.127.194 B. 214.66.128.195 C. 212.64.143.194 D. 213.66.111.194 View AnswerAnswer: A Q2. -- Exhibit --user@router> show configuration firewall familyinet { filter demo { term example { from { source-address { 100.100.100.0/24; } destination-address { 200.200.200.0/24; } }
Q1. Which two statements are true about TCP communication? (Choose two.) A. The receiver acknowledges the final packet in each communications stream. B. The receiver adds sequencing numbers to the packets received. C. The sender adds sequencing numbers to the packets it sends. D. The receiver acknowledges each packet it receives from the sending device. View AnswerAnswer: A,C Q2. Which di
Q1. What are three characteristics of UDP? (Choose three.) A. UDP is faster than TCP. B. UDP operates at the Transport Layer. C. UDP is connection-oriented. D. UDP data is sent best-effort. E. UDP is more reliable than TCP. View AnswerAnswer: A,B,D Q2. What is the decimal equivalent of 00000100? A. 2 B. 4 C. 9 D. 12 View AnswerAnswer: B Q3. -- Exhibit --interfaces { ge-0/0/8 {
Q1. You are asked to change the cable on interface fe-4/2/3. Which statement is correct? A. The cable is found on port 4, FPC 2, and slot 3. B. The cable is found on slot 2, port 3, and FPC 4. C. The cable is found on FPC 4, slot 3, and port 2. D. The cable is found on slot 2, FPC 3, and port 4. View AnswerAnswer: B Q2. Which two statements are true of login classes? (Choose two.) A. Us
Q1. Which two login-class permissions could permit a user to view the system hierarchy of the active configuration? (Choose two.) A. system permission B. view-configuration permission C. network permission D. super-user permission View AnswerAnswer: A,B Q2. What is the role of route preference? A. It is used as a tiebreaker when the same prefix is available through multiple protocols. B
Q1. You have a network containing 120 routers. You must establish and maintain connectivity between the loopback interfaces of all routers. Because of the critical services using the network, you need redundancy and fast failover. Which routing protocol should you use in this scenario? A. OSPF B. RIP C. BGP D. static View AnswerAnswer: A Q2. Which word starts a command to add configurati
Q1. Which two commands would you use to discard a candidate configuration? (Choose two.) A. rollback B. delete C. delete 0 D. rollback 0 View AnswerAnswer: A,D Q2. Which two commands allow you to return to a previous version of software on the device? (Choose two.) A. request system software add B. request system software downgrade C. request system software replace D. request system