Q1. Where do you find the model number of a Cisco MDS 9200 Series chassis? 

A. on the top front of the chassis next to the serial number 

B. on the bottom front of the chassis next to the Cisco logo 

C. on the top front of the chassis next to the Cisco logo 

D. on the bottom front of the chassis next to the serial number 

View Answer

Q2. Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP? 

A. routing 

B. tunneling 

C. handshaking 

D. transporting 

View Answer

Q3. Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.) 

A. Its power supplies and fan trays are hot-swappable. 

B. It supports unified ports. 

C. It is offered in a one-rack-unit form factor. 

D. It has one expansion slot. 

E. It supports up to 96 10G BASE-T ports. 

View Answer

Q4. If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true? 

A. The server shuts down. 

B. The server automatically reboots reboot in 3 minutes. 

C. The endpoints on that server cannot be upgraded. 

D. The server is online, but the administrator cannot assign a service profile to that blade. 

View Answer

Q5. Which two statements about PCIe are true? (Choose two.) 

A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes. 

B. You can install a PCI Express x8 adapter into an x4 slot. 

C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path. 

D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0. 

E. A link that is composed of four lanes is called an x4 link. 

View Answer

Q6. Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.) 

A. Cisco Nexus 7718 switch 

B. Cisco Nexus 9508 switch 

C. Cisco Nexus 7710 switch 

D. Cisco Nexus 93128TX switch 

E. Cisco Nexus 6004 switch 

View Answer

Q7. Which processor option is supported in the Cisco UCS C420 M3 Server? 

A. up to two Intel Xeon E5-4600 series multicore processors 

B. up to two Intel Xeon E7-4800 series multicore processors 

C. up to four Intel Xeon E5-4600 series multicore processors 

D. two or four Intel Xeon E7-8800 series multicore processors 

View Answer

Q8. Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt "switch(boot) #"? 

A. exec -> admin-password <password> 

B. connect local-mgmt -> admin-password <password> 

C. configure terminal -> admin-password <password> 

D. connect nxos -> admin-password <password> 

E. admin-password <password> 

View Answer

Q9. Which three statements about FCoE are true? (Choose three.) 

A. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure. 

B. Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic. 

C. Increases capital costs due to the difficulty to manage. 

D. Consolidates I/O traffic in the data center. 

View Answer

Q10. Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.) 

A. Fabric Interconnect firmware 

B. LAN on Motherboard 

C. Cisco UCS Manager 

D. CIMC 

E. System BIOS 

View Answer