NEW QUESTION 1
A NetScaler with Unified Gateway combines and to provide access to websites and applications through a single URL. (Choose the correct option to complete the sentence.)

• A. NetScaler Gateway; Load Balancing
• B. Content Switching; Authentication features
• C. Content Switching; NetScaler Gateway
• D. Authentication features; Load Balancing

Answer: B

Explanation: NetScaler Unified Gateway leverages its Authentication, Authorization and Auditing (AAA) features with content switching to enable users to access all their authorized enterprise applications through a single gateway and URL.

NEW QUESTION 2
Scenario: A NetScaler has two interfaces as 1/1 and 1/2 with MAC-based Forwarding enabled. Below are the specifications:
-Interface 1/1 and IP 192.168.10.10 is bound to VLAN 10.
-On Interface 1/2 VLAN 20 and VLAN 30 are tagged.
-VLAN 20 is bound to IP 192.168.20.10 and VLAN 30 is bound to 192.168.30.10 The NetScaler receives a packet for VIP 192.168.30.30 on interface 1/1.
Which interface of NetScaler will send a reply back in this environment?

• A. Interface 1/1
• B. NetScaler will drop the packet received on interface 1/1
• C. Interface 1/2
• D. Netscaler will reply on interfaces 1/1 and 1/2

Answer: D

NEW QUESTION 3
Which two components need to be configured for SmartAccess? (Choose two.)

• A. Configuration logging
• B. XenDesktop policies
• C. XML Trust
• D. StoreFront server groups

Answer: CD

NEW QUESTION 4
Scenario: A NetScaler is configured with the following modes:
-MAC-based Forwarding
-USIP
-USNIP
-Layer 3 mode
A Citrix Administrator configured a new router and now requires some of the incoming and outgoing traffic to take different paths through the new router. However, the administrator notices that this is failing and takes a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the NetScaler.
Which mode should the administrator disable on the NetScaler to facilitate the addition of the new router and successfully route the packets?

• A. MAC-based Forwarding
• B. USIP
• C. Layer 3 mode
• D. USNIP

Answer: D

NEW QUESTION 5
Which three steps can a Citrix Administrator take to integrate an existing CERT-based authentication policy on an existing NetScaler Gateway platform? (Choose three.)

• A. Create a CERT authentication policy and bind it to the NetScaler Gateway virtual server
• B. Enable client authentication on the SSL parameters of the virtual server
• C. Bind the existing CERT authentication policy to the NetScaler Gateway virtual server
• D. Enable the two-factor option on the existing CERT authentication profile
• E. Change the client certificate to Mandatory on the SSL parameters of the virtual server

Answer: ACD

NEW QUESTION 6
Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the NetScaler high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary NetScaler is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue with the NetScalers?

• A. HA monitoring is enabled on a disabled interface of the Primary Node
• B. HA monitoring is enabled on an interface of the Secondary Node that shows as ENABLED, DOWN
• C. Independent network configuration (INC) mode is enabled
• D. HA heartbeats are only seen on some enabled interfaces of the Secondary Node

Answer: D

NEW QUESTION 7
A Citrix Administrator has deployed a new NetScaler MPX appliance in the demilitarized (DMZ) with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the NetScaler?

• A. One-Arm
• B. Two-Arm
• C. Forward Proxy
• D. Transparent

Answer: D

NEW QUESTION 8
A Citrix Administrator needs to generate AppFlow data for internal ICA connections.
Which two connection methods could the administrator use to route internal ICA connections through NetScaler without modifying the existing network routing? (Choose two.)

• A. Policy-based Routing
• B. ICA Proxy
• C. SOCKS proxy
• D. Transparent Mode

Answer: AD

NEW QUESTION 9
Users are experiencing resets form the Intranet server website, which is load-balanced trough the NetScaler. Which NetScaler tool can a Citrix Administrator use to troubleshoot the reset issue?

• A. Take a packet trace with nstrace and analyze with WireShartk.
• B. Look in the Event Viewer for packet resets from the NetScaler.
• C. View the new nslog form the command-line interface to look for packet resets form the NetScaler.
• D. Use the nslog to look for packet resets on the NetScaler.

Answer: D

NEW QUESTION 10
A Citrix Administrator needs to configure a NetScaler high availability (HA) pair with both NetScalers in different subnets.
What does the administrator need to do for the HA pair to work in different subnets?

• A. Configure Sync VLAN
• B. Turn on HA Monitoring on all Interfaces
• C. Turn on Fail-safe Mode
• D. Turn on Independent Network Configuration (INC) mode

Answer: D

NEW QUESTION 11
Scenario: A Citrix Administrator configured the “-denySSLReneg” Parameter using the below command on NetScaler to enhance security.
set ssl parameter –denySSLReneg <option>
Which two options can the administrator use to complete the command (Choose two.)

• A. NO
• B. NONSECURE
• C. ALL
• D. HIGHSECURE
• E. FRONTEND_CLIENT

Answer: AB

NEW QUESTION 12
Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment. However, due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator do to load-balance the web servers in this scenario?

• A. Install a NetScaler CPX.
• B. Purchase NetScaler MPX.
• C. Purchase a NetScaler SDX.
• D. Install NetScaler VPX.

Answer: A

NEW QUESTION 13
Scenario: A Citrix Administrator needs to configure a NetScaler Gateway virtual server in order to meet the security requirements of the organization. The administrator needs to configure timeouts for end-user sessions, to be triggered by the following behaviors:
-Inactivity for at least 15 minutes
-No keyboard or mouse activity for at least 15 minutes
Which two timeout settings can the administrator configure to meet the requirements? (Choose two.)

• A. Client Idle Time-out set to 15
• B. Forced Time-out set to 15
• C. Client Idle Time-out set to 900
• D. Session Time-out set to 15
• E. Session Time-out set to 900
• F. Forced Time-out set to 900

Answer: CE

NEW QUESTION 14
A Citrix Administrator needs to configure single sign-on to a StoreFront server using an external, secure single URL.
Which type of virtual server can the administrator use to meet this requirement?

• A. Load Balancing
• B. Content Switching
• C. VPN
• D. Unified Gateway

Answer: D

NEW QUESTION 15
A Citrix Administrator needs to configure a policy where users will be downgraded to ‘ICA Proxy Only’ from ‘Full VPN’ in the event a user fails to meet Endpoint Analysis requirements.
Which configuration is required to satisfy this requirement?

• A. Quarantine Group with nFactor authentication
• B. Quarantine Group with two-factor authentication, using LDAP as primary authentication
• C. Quarantine Group with no Active Directory membership
• D. Quarantine Group with regular Active Directory membership

Answer: A

NEW QUESTION 16
Which two options would provide an end-to-end encryption data, while allowing the NetScaler to optimize the responses? (Choose two.)

• A. HTTP protocol for the virtual server
• B. SSL Bridge protocol for the virtual server
• C. HTTP protocol for the services
• D. SSL protocol for the virtual server
• E. SSL protocol for the services
• F. SSL Bridge protocol for the services

Answer: AB

NEW QUESTION 17
Scenario: A Citrix Administrator needs to integrate LDAP for NetScaler system administration using the current Active Directory groups. The administrator created the group on the NetScaler, exactly matching the group name in LDAP.
What can the administrator add next to complete the configuration of the LDAP?

• A. Users to the group on the NetScaler
• B. An AAA action to the group
• C. A command policy to the group to specify the permission level
• D. A nested group to the new group

Answer: C

NEW QUESTION 18
A Citrix Administrator receives user complaints about latency while accessing an application that is being load-balanced on the NetScaler.
Which tool can the administrator use to gather information regarding Response time, Client latency and Server-side processing time?

• A. aaad.debug
• B. WAN Insight
• C. NetScaler Management and Analytics System (MAS)
• D. HDX Insight

Answer: D