NEW QUESTION 1
Scenario: A Citrix Architect needs to assess a XenApp and XenDesktop environment. The XenApp and XenDesktop diagram in the Exhibit gives details about the current Site and Zone design.
Click the Exhibit button to view the diagram.



What should the architect recommend based on the current Site and Zone design?

• A. Add an additional Delivery Controller to the Primary Zone.
• B. Replace Satellite Zone 2 with a separate XenDesktop Site.
• C. Add additional StoreFront servers to Satellite Zone 2.
• D. Replicate the XenDesktop Site database to Satellite Zone 2.

Answer: A

NEW QUESTION 2
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.

The architect should scale the hardware used to host the VMs for User Group 1 to _____ GB of RAM. (Choose the correct option to complete the sentence.)

• A. 256
• B. 128
• C. 384
• D. 196
• E. 64

Answer: C

NEW QUESTION 3
Scenario: A Citrix Architect needs to manage the disaster recovery process for a XenApp and XenDesktop environment. The environment currently consists of an active datacenter which is typically accessed by users and a disaster recovery (DR) datacenter which would be used in the event that a disaster impacts the primary datacenter. The organization has made it a priority to minimize the loss of data when failing over between datacenters and has begun planning for an event in which the environment must fail over from the primary datacenter to the DR datacenter.
What is the appropriate sequence of steps that the architect should follow after getting management approval to complete the process in case of such an event?

• A. Block access to primary datacenter, complete replication, terminate/drain existing sessions, reverse direction of replication, enable access in DR datacenter
• B. Block access to primary datacenter, terminate/drain existing sessions, complete replication, reverse direction of replication, enable access in DR datacenter
• C. Terminate/drain existing sessions, complete replication, block access to primary datacenter, enable access in DR datacenter, reverse direction of replication
• D. Complete replication, terminate/drain existing sessions, block access to primary datacenter, reverse direction of replication, enable access in DR datacenter
• E. Complete replication; block access to primary datacenter, terminate/drain existing sessions, enable access in DR datacenter, reverse direction of replication
• F. Terminate/drain existing sessions; block access to primary datacenter, complete replication, reverse direction of replication, enable access in DR datacenter

Answer: D

NEW QUESTION 4
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has determined the applications and characteristics listed in the Exhibit during the application assessment.
Click the Exhibit button to view the list of applications and characteristics.

To which application category does Application1 belong, based on the information provided in the Exhibit?

• A. Management Apps
• B. Common Apps
• C. User Apps
• D. Departmental Apps

Answer: D

NEW QUESTION 5
Reduce costs

Answer:

NEW QUESTION 6
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. Currently, the environment is configured with two locations with identical XenDesktop Sites. Each Site has two Delivery Controllers, two StoreFront servers, and one NetScaler high availability pair. The same applications have been
published from both Sites for all the users. Two Zones (Zone A and Zone B) are configured in each Site with one Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.
The following access requirements have been identified:
Users should have a single URL when accessing resources from different Sites.
Users should always connect to the datacenter closest to their location.
Applications added to Favorites within Citrix Receiver should be retained when accessed from different Sites.
Launched applications and desktops should always connect through a local NetScaler.
No duplication of applications published from different Sites.
Microsoft Outlook should always launch in Zone A.
What should the architect recommend to ensure that Microsoft Outlook always launches from Zone A for every user?

• A. Configure zone preference based on user location.
• B. Configure Zone A as the application home zone for Microsoft Outlook.
• C. Move a Controller from Zone B to Zone A.
• D. Designate Zone A as the home zone for all users.

Answer: A

NEW QUESTION 7
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.
Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Resource Layer
requirements:
The profile solution should minimize logon and logoff times as much as possible.
The time required to configure and maintain the solution should be minimized.
User groups do NOT need to use the same profile type.
Which profile type should the architect use for the Customer Service group?

• A. Microsoft roaming
• B. Mandatory
• C. Local
• D. Citrix Profile Management

Answer: C

NEW QUESTION 8
Scenario: A Citrix Architect is designing an environment for a large company. The company has identified the following user groups and requirements.
Product Managers - Typically, they work from inside the company network but are able to work from home. They need to use a variety of standard productivity and web-based SaaS applications.
Field Sales Engineers - They frequently work with mobile devices and tend to access the environment externally. They need access to sales tools and the front-end of the customer database.
Web Developers - Internal and remote workers who use specialized hardware with a graphics card to handle resource-intensive applications.
Which FlexCast model should the architect assign to Field Sales Engineers?

• A. Published Apps
• B. Hosted Applications
• C. Hosted VDI
• D. Published Desktops

Answer: B

NEW QUESTION 9
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. While designing Universal Print server (UPS) for the customer, the architect is asked to ensure that the UPS design can handle 500 simultaneous print jobs per minute.
What must the architect deploy to support the load estimated by the customer?

• A. Two UPS servers and configure UPS for load balancing policy
• B. Ten UPS servers and configure UPS for load balancing policy
• C. Five UPS servers and configure NetScaler load balancing
• D. Two UPS servers and configure NetScaler load balancing
• E. Five UPS servers and configure UPS for load balancing policy
• F. Ten UPS servers and configure NetScaler load balancing

Answer: E

NEW QUESTION 10
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified the Resource Layer requirements shown in the Exhibit. Click the Exhibit button to view the requirements.

Which Citrix Profile Management feature can help the architect address the Accountants group requirements?

• A. Profile streaming
• B. File exclusions
• C. File inclusions
• D. Profile caching

Answer: D

NEW QUESTION 11
Scenario: A Citrix Architect needs to redesign an existing XenApp and XenDesktop environment to use Machine Creation Services (MCS). During the design discussions, the locations for the MCS-provisioned thin clone machine disks are proposed as shown in the Exhibit.
Click the Exhibit button to view the details.


Which two potential drawbacks should the architect address with the customer before proceeding with this configuration? (Choose two.)

• A. It is limited to NFS shared storage.
• B. It will require substantial read IOPS from the shared storage location during machine creation and updates.
• C. It will require substantial write IOPS to the shared storage location as temporary data is written.
• D. It will require more storage to be allocated on the VM hosts compared with other options.
• E. It is limited to certain hypervisors.

Answer: CE

NEW QUESTION 12
Scenario: A Citrix Architect needs to design a disaster recovery (DR) XenApp and XenDesktop Site that will be hosted in Citrix Cloud and Microsoft Azure. The DR Site is expected to support 2,000 Desktop OS Virtual Delivery Agent (VDA) machines.
The architect should include ____ Cloud Connectors in the Azure resource location, each with a minimum of ____ vCPUs and ____ GB of RAM to avoid unnecessary over-provisioning of resources and follow Citrix leading practices. (Choose the correct option to complete the sentence.)

• A. 3; 2; 4
• B. 3; 4; 4
• C. 3; 4; 8
• D. 2; 4; 4
• E. 1; 2; 4
• F. 2; 4; 8

Answer: F

NEW QUESTION 13
Scenario: A Citrix Architect needs to design a new XenDesktop environment for a client who does NOT currently have a Citrix environment. The project scope has NOT yet been determined, and the architect is about to start the Assess phase of the project.
In which order should the architect complete the four tasks of a typical assessment when following the Citrix methodology?

• A. Define the organization, Define the user groups, Define the applications, Define the project team.
• B. Define the user groups, Define the applications, Define the organization, Define the project team.
• C. Define the project team, Define the organization, Define the user groups, Define the applications.
• D. Define the organization, Define the project team, Define the user groups, Define the applications.

Answer: D

NEW QUESTION 14
Scenario: IT management has decided which server hardware model to use for new XenApp and XenDesktop Sites and needs guidance on sizing the Hardware Layer.
Click the Exhibit button to view the host details.

A Citrix Architect is planning to install XenServer 7.x on this host which will be used to host only XenApp servers.
How many vCPUs should be consumed to deploy XenApp servers with high performance, considering the over-subscription ratio?

• A. 32
• B. 24
• C. 16
• D. 48

Answer: C

NEW QUESTION 15
Scenario: During an assessment of a Citrix Infrastructure, a Citrix Architect finds that there are four active Sites. Each Site has one NetScaler SDX pair and two StoreFront servers in a server group to allow access for internal and external users. Users have to use different URLs when they access resources from different Sites. Single-factor authentication is used for both internal and external access. NetScaler appliances are placed in the DMZ with the appropriate firewall ports configured to allow Citrix traffic. Many of the internal users connect using corporate-owned laptops and some external users also connect using personal devices.
The architect needs to provide a design for a multi-tier environment with segregated internal and external traffic on the NetScaler appliance.
How many NetScaler instances and StoreFront servers are required to meet this highly available design?

• A. Eight NetScaler instances (two in each Site) and sixteen StoreFront servers (four in each Site)
• B. Four NetScaler instances (one in each Site) and eight StoreFront servers (two in each Site)
• C. Eight NetScaler instances (two in each Site) and eight StoreFront servers (two in each Site)
• D. Sixteen NetScaler instances (four in each Site) and eight StoreFront servers (two in each Site)

Answer: B

NEW QUESTION 16
Scenario: A Citrix Architect has implemented a multi-location profile strategy as part of a large XenApp and XenDesktop solution. The architect needs to implement a single policy that sets the profile path for all users.
New York users – Server:NYC-FS.company.lan – Share: NYC-Profiles$
Miami users – Server:MIA-FS.company.lan – Share: MIA-Profiles$
San Francisco users – Server:SFO-FS.company.lan – Share: SFO-Profiles$ The architect has proposed the usage of the following path for all users:
\#Loc#-FS.company.lan#Loc#-Profiles$#sAMAccountName#%ProfileVer%
What does the architect need to define in order to use the above path for all users as the profile location?

• A. A Loc variable using the Current-Location attribute
• B. A new attribute called Loc using Active Directory Explorer
• C. A user environment variable Loc using a login script
• D. A DFS-ROOT variable per datacenter and incorporate the user environment variable %homeshare%

Answer: C

NEW QUESTION 17
Scenario: A Citrix Architect needs to create a conceptual architecture for a XenApp and XenDesktop environment on behalf of a marketing firm. Based on some initial discussions around the firm's business goals and objectives, the architect has collected the information as shown in the Exhibit.
Click the Exhibit button to view the information.

Which delivery model should the architect recommend?

• A. Single-Site in Citrix Cloud, single public cloud resource location
• B. Multi-Site, single-zone, multiple public cloud resource locations
• C. Multi-Site, single on-premises datacenter
• D. Single-Site in Citrix Cloud, single on-premises resource location
• E. Single-Site, single-zone, single on-premises datacenter

Answer: A

NEW QUESTION 18
Scenario: A Citrix Architect is reviewing a XenApp and XenDesktop design for an environment with multiple Active Directory forests.
Click the Exhibit button to view the design details.



Which risk should the architect highlight to the customer, based on the details listed in the Exhibit?

• A. The SupportMultipleForest registry key is NOT supported.
• B. The Active Directory trust method is NOT supported.
• C. The Active Directory functional level is NOT supported.
• D. The DNS lookup strategy is NOT supported.

Answer: C