Q1. HOTSPOT

You have an Exchange Server 2013 organization that contains four servers. The servers are configured as shown in the following table. 

You run Get-TransportConfig and receive the output shown in the exhibit. (Click the Exhibit button.) 

Use the drop-down menus to select the answer choice that completes each statement.

View Answer

Q2. You need to recommend which recovery solution will restore access to all of the mailboxes in AccountingDB if EX1 fails. The solution must restore access to email messages as quickly as possible. 

Which recovery solution should you recommend? 

A. On EX2, create a new mailbox database. Restore the database files, and then mount the database. Run the New-MailboxRestoreRequest cmdlet for all of the mailboxes in the database. 

B. On EX2, create a new mailbox database. Restore the database files, and then mount the database. Run the Set-Mailbox cmdlet for all of the mailboxes in the database. 

C. On replacement hardware, run setup /mode:recoverserver. Restore the database files, and then mount the database. Run the Set-Mailbox cmdlet. 

D. On replacement hardware, run setup /mode:recoverserver. Restore the database files, and then mount the database. Run the New-MailboxRestoreRequest cmdlet for all of the mailboxes in the database. 

View Answer

Q3. Topic 1, Fabrikam, Inc

Overview

Fabrikam, Inc., is a pharmaceutical company located in Europe. The company has 5,000 users. The company is finalizing plans to deploy an Exchange Server 2013 organization.

The company has offices in Paris and Amsterdam.

Existing Environment

Active Directory Environment

The network contains an Active Directory domain named fabrikam.com. An Active Directory site exists for each office.

Network Infrastructure

The roles and location of each server are configured as shown in the following table.

Client computers run either Windows 7 or Windows 8 and have Microsoft Office 2010 installed.

The Paris office uses the 192.168.1.0/24 IP range. The Amsterdam office uses the 192.168.2.0/24 IP range.

The offices connect to each other by using a high-speed, low-latency WAN link. Each office has a 10-Mbps connection to the Internet.

Planned Exchange Infrastructure

The company plans to deploy five servers that run Exchange Server. The servers will be configured as shown in the following table.

The company plans to have mailbox databases replicated in database availability groups (DAGs). The mailbox databases and DAGs will be configured as shown in the following table.

DAG1 will use FS1 as a file share witness. DAG2 will use FS3 as a file share witness.

You plan to create the following networks on each DAG:

A dedicated replication network named DAGNET1

A MAPI network named DAGNET2

All replication traffic will run on DAGNET1. All client connections will run on DAGNET2.

Client connections must never occur on DAGNET1. Replication traffic must only occur on DAGNET2 if DAGNET1 is unavailable.

Each Exchange Server 2013 Mailbox server will be configured to have two network adapters.

The following two mailbox databases will not be replicated as part of the DAGs:

A mailbox database named AccountingDB that is hosted on EX1

A mailbox database named TempStaffDB that is hosted on EX4

EDGE1 will have an Edge Subscription configured, with both EX1 and EX2 as targets.

Requirements

Planned Changes

An external consultant reviews the Exchange Server 2013 deployment plan and identifies the following areas of concern:

The DAGs will not be monitored.

Multiple Edge Transport servers are required to prevent the potential for a single point of failure.

Technical Requirements

Fabrikam must meet the following technical requirements:

Email must be evaluated for SPAM before the email enters the internal network.

Production system patching must minimize downtime to achieve the highest possible service to users.

Users must be able to use the Exchange Control Panel to autonomously join and disjoin their department's distribution lists.

Users must be able to access all Internet-facing Exchange Server services by using the names of mail.fabrikam.com and autodiscover.fabrikam.com.

The company establishes a partnership with another company named A. Datum Corporation. A. Datum uses the SMTP suffix adatum.com for all email addresses.

Fabrikam plans to exchange sensitive information with A. Datum and requires that the email messages sent between the two companies be encrypted. The solution must use Domain Security.

Users in the research and development (R&D) department must be able to view only the mailboxes of the users in their department from Microsoft Outlook. The users in all of the other departments must be prevented from viewing the mailboxes of the R&D users from Outlook.

Administrators plan to produce HTML reports that contain information about recent status changes to the mailbox databases.

Fabrikam is evaluating whether to abort its plan to implement an Exchange Server 2010

Edge Transport server and to implement a Client Access server in the Paris office instead.

The Client Access server will have anti-spam agents installed.

You are testing the planned implementation of Domain Security. 

You discover that users fail to exchange domain-secured email messages. 

You open the Exchange Management Shell and discover the output shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that users can exchange email messages by using Domain Security. 

Which two parameters should you modify by using the Set-SendConnector cmdlet? (Each correct answer presents part of the solution. Choose two.) 

A. tlsauthlevel 

B. requiretls 

C. ignorestarttls 

D. tlsdomain 

E. domainsecureenabled 

F. smarthostauthmechanism 

View Answer

Q4. HOTSPOT 

Your network contains an Active Directory forest named contoso.com. The forest contains two sites named Site1 and Site2. 

You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table. 

An administrator creates a new Active Directory site named Site3. The administrator creates mailboxes for the users in Site3. All of the mailboxes of the Site3 users are located on EX1. 

Site3 contains a domain controller named dc3.contoso.com. The Site3 users report that sometimes, when they open Microsoft Outlook, it takes a long time to access their mailbox. 

You need to reduce the amount of time it takes for the users to access their mailbox. 

Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.) 

View Answer

Q5. DRAG DROP 

Your company plans to deploy an Exchange Server 2013 organization. 

The network contains an Active Directory forest. The forest contains two domains named contoso.com and child.contoso.com. The forest contains one Active Directory site. 

To contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed. To child.contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed. 

To the contoso.com domain, you deploy a new member server named Server1 that runs 

Windows Server 2012. 

You need to prepare the forest for the planned deployment of Exchange Server 2013. 

Which three commands should you run from Server1? 

To answer, move the three appropriate commands from the list of commands to the answer 

area and arrange them in the correct order. 

View Answer

Q6. Your network contains an Active Directory forest named contoso.com. 

The forest contains the domain controllers configured as shown in the following table. 

You plan to deploy an Exchange Server 2013 organization to the forest 

A company policy prevents administrators from logging on to DC2 to perform installations. 

You need to prepare the Active Directory schema for the planned Exchange Server deployment. 

You verify that your user account has all the required permissions to achieve the task. The solution must minimize changes to the Active Directory infrastructure. 

A. Move the schema master role to DC1, and then run Exchange setup. 

B. Deploy a member server to contoso.com, and then move the server to the West site. Run adprep.exe from the member server. 

C. Log on to DC3 and then run Exchange setup. 

D. Log on to any server in the West site, and then run Exchange setup. 

View Answer

Q7. You need to recommend which tasks must be performed to meet the technical requirements of the research and development (R&D) department. 

Which two tasks should you recommend? (Each correct answer presents part of the solution. Choose two.) 

A. Create a new global address list (GAL) and a new address book policy. 

B. Modify the permissions of the default global address list (GAL), and then create a new GAL. 

C. Run the Update AddressList cmdlet. 

D. Run the Set-Mailbox cmdlet. 

E. Create an OAB virtual directory. 

View Answer

Q8. DRAG DROP

You have an Exchange Server 2013 organization. 

You plan to delegate the following administrative tasks: 

View the status of the message queue. 

Create, mount, and dismount databases. 

Restore mailboxes from a recovery database, 

Modify the settings of Exchange ActiveSync devices. 

You need to identify which role group must be used to delegate each administrative task. 

The solution must ensure that the role group that has the fewest administrative privileges is used. 

Which role groups should you identify? {To answer, drag the appropriate role groups to the correct tasks. Each role group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 

View Answer

Q9. Your network contains an Active Directory forest. The forest contains one domain. The domain contains two sites and three domain controllers. The sites and domain controllers are configured as shown in the following table. 

The sites connect to each other by using a WAN link. 

You have an Exchange Server 2013 organization that contains two servers in the Main Office site. 

In Branch1, you plan to deploy one server to the Exchange Server 2013 organization. 

You need to ensure that all of the Exchange Server services in Branch1 are available if the WAN link fails after the planned deployment. 

What should you do? 

A. Create a site link bridge, and then configure Branch1 as a hub site. 

B. Replace the domain controller in Branch1 with an RODC that runs Windows Server 2012. 

C. Replace the domain controller in Branch1 with a writable domain controller that runs a Server Core installation of Windows Server 2008. 

D. Create an additional site link, and then configure Branch1 as a hub site. 

View Answer

Q10. You are evaluating the deployment of the additional Exchange Server 2013 servers. 

You need to recommend changes to the transport configurations to ensure that all email 

messages sent from the Detroit office are routed through EX2. 

What should you include in the recommendation? 

A. Increase the cost of the CHI-NY site link to 15. 

B. Specify an Exchange-specific cost of 20 for the CHI-DET site link. 

C. Decrease the cost of the CHI-NY and the DET-NY site links to 4. 

D. Increase the cost of the DET-NY site link to 15. 

View Answer