NEW QUESTION 1

Microsoft Hyper-V host has a network interface card (NIC) named NIC1 that supports Remote Direct Memory Access (RDMA). You plan to install a second NIC at a later date.
The Hyper-V host must have a virtual switch named vSwitch1. Switch Embedded Teaming (SET) must be enabled on the NIC.
You need to ensure that you can use the same virtual switch when you add the second NIC.
How should you complete the Windows PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/hyper-v/new-vmswitch?view=win10-ps

NEW QUESTION 2

A company has a Microsoft System Center virtual machine manager (SCVMM) environment. The environment includes a software load balancer (SLB) and virtual machine (VMs) that run Network controller.
You need to create a guest cluster. What should you do?

• A. Create a service template
• B. Create a logical network
• C. Deploy a RAS gateway
• D. Create an internal load-balancer virtual IP address

Answer: D

Explanation:
VMM 1801 and later supports guest clustering in SDN through an Internal Load Balancer(ILB) Virtual IP(VIP).
The ILB uses probe ports which are created on the guest cluster VMs to identify the active node. At any given time, the probe port of only the active node responds to the ILB and all the traffic directed to the VIP is routed to the active node. References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-guest-clusters?view=sc-vmm-1801

NEW QUESTION 3

You need to configure an SDN network controller for the SCVMM test environment. What should you do first?

• A. In SCVMM, create a dedicated host group for Det-Server3, Det-Server4, and Det-Server5.
• B. In AD DS, create a security group and add Det-Server3, Det-Server4, and Det-Server5.
• C. In AD DS, create a security group and add Det-Server6, Det-Server7, and Det-Server8.
• D. In SCVMM, create a dedicated host group for Det-Server6, Det-Server7, and Det-Server8.

Answer: D

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801

NEW QUESTION 4

You manage a datacenter that includes Software Defined Storage (SDS) and Microsoft System Center Virtual Machine Manager (SCVMM). You have a Microsoft Azure subscription.
You need to automate the replication of Hyper-V virtual machines (VMs) to Azure by using Azure Site Recovery (ASR).
Which three resources should you implement? Each correct answer presents part of a solution.
NOTE: Each correct selection is worth one point.

• A. Bitlocker-enabled VMs
• B. Azure storage account
• C. Microsoft Hyper-V VMs with hot storage
• D. SCVMM host group
• E. Azure Recovery Services Vault
• F. Shielded VMs

Answer: BDE

NEW QUESTION 5

You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?

• A. Windows PowerShell script that runs Disk2VHD
• B. Microsoft Hyper-V Replica
• C. WBAdmin.exe
• D. System Center Data Protection Manager

Answer: D

NEW QUESTION 6

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You need to block specific packets on the virtual switch.
Which two types of virtual switch extensions can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. capturing extensions
• B. forwarding extensions
• C. monitoring extensions
• D. filtering extensions

Answer: BD

Explanation:

References:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-the-hyper-v-extensible-switch

NEW QUESTION 7

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You need to enable Data Deduplication for the SCVMM library server.
Which action should you perform for each configuration option? To answer, drag the appropriate action to the correct condition. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/advanced-settings

NEW QUESTION 8

You plan to implement Microsoft System Center Virtual Machine Manager (SCVMM). The VMM environment will use shared ISO images with Hyper-V virtual machines. The SQL Server instance used by SCVMM must be able to communicate with other servers on the network.
You must install SCVMM on a server named VMM01 while minimizing the number of Active Directory Domain Services (AD DS) accounts that are created. You need to install SCVMM.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 9

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You plan to implement a software load balancer (SLB) Multiplexer (MUX).
You need to configure the Microsoft Hyper-V host servers to host the MUX. What should you do?

• A. Configure Windows Server Gateway.
• B. Install the SLB Host Agent on each Hyper-V host.
• C. Configure virtual machine resource metering.
• D. Configure a Remote Access Service gateway.

Answer: B

Explanation:
References:
https://technet.microsoft.com/en-US/library/mt632286.aspx

NEW QUESTION 10

You manage Microsoft system center virtual machine manager (SCVMM). You need to enable data deduplication for the SCVMM library server. Which action should you perform for each configuration options?
To answer drag the appropriate action to the correct condition.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
MinimumFileAgeDays refers to the number of days after the file is created before the file is considered to be in-policy for optimization. You may want to modify this if you want Data Deduplication to be more aggressive.
Data Deduplication jobs are scheduled via Windows Task Scheduler and can be viewed and edited there under the path Microsoft\Windows\Deduplication. Data Deduplication includes several cmdlets that make scheduling easy. The most common reason for changing when Data Deduplication jobs run is to ensure that jobs run during off hours.
ExcludeFileType is for file types that are excluded from optimization. ExcludeFolder specifies folder paths that should not be considered for optimization. References:
https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/advanced-settings

NEW QUESTION 11

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You plan to implement software load balancer (SLB) on Microsoft Hyper-V host servers by using an SLB Multiplexer (MUX).
You identify the following requirements: Redirect all inbound traffic to the MUX.
Ensure that all outbound network traffic bypasses the MUX. You need to configure the environment.
Which components should you implement? To answer, drag the appropriate components to the correct traffic directions. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-US/library/mt632286.aspx

NEW QUESTION 12

You plan to deploy Windows Server Gateway (WSG) with Microsoft System Center Virtual Machine Manager
(SCVMM).
You need to configure the send and receive buffers for the Hyper-V hosts.
Solution: You run the Windows PowerShell cmdlet Enable-NetAdapterRss. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
You can use the following Windows PowerShell commands to enable and configure RSS on your network adapters:
Enable-NetAdapterRss "NIC1","NIC2"
References:
https://docs.microsoft.com/en-us/windows-server/administration/performance-tuning/subsystem/software-define

NEW QUESTION 13

You deploy Microsoft System Center Virtual Machine Manager (SCVMM). You configure shielded virtual machines (VMs) by using virtual Trusted Platform Modules (vTPM). The shielded VMs are in the existing guarded fabric.
You deploy System Center Data Protection Manager (DPM).
You need to identify the scenarios for which you can use DPM to back up the VMs.
For which two scenarios can you use DPM? Each correct answer presents a complete solution.

• A. shielded VMs not protected with vTPM
• B. Item Level Recovery and Alternate Location Recovery outside of the guarded fabric
• C. Item Level Recovery and Alternate Location Recovery in the guarded fabric
• D. shielded VMs protected with vTPM

Answer: CD

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/dpm/what-s-new-in-dpm-2021?view=sc-dpm-1801

NEW QUESTION 14

You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?

• A. WBAdmin.exe
• B. SCVMM cluster
• C. Microsoft Hyper-V Replica
• D. System Center Data Protection Manager

Answer: D

NEW QUESTION 15

You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM). You install the SCOM agent on the SCVMM server. You install the SCVMM management pack.
You need to ensure that Performance and Resource Optimization (PRO) is available. What should you run?

• A. the SCOM setup wizard
• B. the integration wizard in the SCVMM console
• C. the integration wizard in the SCOM console
• D. the SCVMM setup wizard

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitors-ops-manager?view=sc-vmm-1801

NEW QUESTION 16

You plan to deploy a new virtual machine (VM) that uses the following components:
Windows server 2021
Microsoft system center virtual machine manager (SCVMM)
Nano Server
You create a Microsoft Hyper-V clustered environment and install SCVMM on a server named server1.
You need to create Nano based server image by using an SCVMM template. The image must contain the SCVMM agent.
Which 3 actions should you perform in sequence? Rearrange the answer in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Install the VMM packages offline on an existing Nano Server
If you didn't add the VMM packages when you created the Nano Server VHD, you can install them later, as follows:
1. Copy the VHD/VHDX to a location on a Windows Server 2021 machine. For example: C:\MyNano.vhd.
2. Use PowerShell to install and import the NanoServerPackage provider of the PackageManagement (OneGet) PowerShell module:
Install-PackageProvider NanoServerPackage Import-PackageProvider NanoServerPackage
3. After the provider is installed, you can search and install the VMM packages (VMM agent and Hyper-V),
on the VHD using these cmdlets, where C:\MyNano.vhd
is the location of thNe ano Server based VHD.
Find-NanoServerPackage
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Package -culture en-US
-ToVhd "C:\MyNano.vhd"
Install-NanoServerPackage -Name Microsoft-NanoServer-SCVMM-Compute-Package
-culture en-US -ToVhd "C:\MyNano.vhd
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-nano?view=sc-vmm-2021

NEW QUESTION 17

You must upgrade all Hyper-V clusters that support an upgrade. Which 2 clusters can you upgrade?

• A. Atl-cluster
• B. Det-cluster
• C. Tor-cluster
• D. Dal-cluster

Answer: BD

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-rolling-upgrade?view=sc-vmm-1807

NEW QUESTION 18

You need to integrate WSUS with the SCVMM production instance. Which four actions should you perform in sequence?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
The required process is as follows:
Add a WSUS server to the VMM fabric
Create and assign update baselines
Scan for update compliance
References:
https://docs.microsoft.com/en-us/system-center/vmm/update-server?view=sc-vmm-1807

NEW QUESTION 19

You administer the virtualization environment for an organization. You manage all Microsoft Hyper-V hosts locally. You plan to deploy Microsoft system center virtual machine manager (SCVMM).
(SCVMM) administrators must have full administrative permissions over the SCVMM fabric but no permission to other organizational fabrics. Administrators in the domain environment must not have any permission to the SCVMM infrastructure.
You need to deploy the SCVMM environment. What should you include?

• A. Local installation of the SCVMM agent
• B. Bit locker encrypted VHDX file
• C. Host guardian service a trusted domain
• D. Host guardian service in an isolated forest

Answer: D

Explanation:
When setting up HGS, you are given the option of creating an isolated Active Directory forest just for HGS or to join HGS to an existing, trusted domain. This decision, as well as the roles you assign the admins in your organization, determine the trust boundary for HGS. Whoever has access to HGS, whether directly as an admin or indirectly as an admin of something else (e.g. Active Directory) that can influence HGS, has control over your guarded fabric. HGS admins choose which Hyper-V hosts are authorized to run shielded VMs and manage the certificates necessary to start up shielded VMs. An attacker or malicious admin who has access to HGS can use this power to authorize compromised hosts to run shielded VMs, initiate a denial-of-service attack by removing key material, and more.
To avoid this risk, it is strongly recommended that you limit the overlap between the admins of your HGS (including the domain to which HGS is joined) and Hyper-V environments. By ensuring no one admin has access to both systems, an attacker would need to compromise 2 different accounts from 2 individuals to complete his mission to change the HGS policies. This also means that the domain and enterprise admins for the two Active Directory environments should not be the same person, nor should HGS use the same Active Directory forest as your Hyper-V hosts. Anyone who can grant themselves access to more resources poses a security risk.
References:
https://docs.microsoft.com/en-us/windows-server/security/guarded-fabric-shielded-vm/guarded-fabric-manageh

NEW QUESTION 20

You need to ensure that the Hyper-V hosts meet the requirements for the sales department application. Which three actions should you perform in sequence? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21
......