NEW QUESTION 1
In an explicit ProxySG deployment, the TCP packet sent from the client to the ProxySG contains what value as the destination IP address?

• A. The IP address of the ProxySG or a load balancer.
• B. The IP address of the client.
• C. The IP address of the origin content server.
• D. The answer depends on whether client IP address reflection is enabled on this ProxySG.

Answer: A

NEW QUESTION 2
How frequent are updates of WebFilter on-box database within the ProxySG?

• A. Every 5-20 minutes during the time intervals set in the Management Console
• B. When the previous database subscription period ends, approximately once every 60 days
• C. Once every day, the specific time is configurable via Management Console
• D. Only when the administrator presses button Download now, to downloads a new bcwf.db file to the ProxySG

Answer: B

NEW QUESTION 3
What can be concluded about this request processing order?

• A. ProxyAV Is accessed in ICAP REQMOD mode
• B. ProxyAV is accessed ICAP RESPMOO mode
• C. ProxySG with ProxyAV is deployed as a forward proxy

Answer: A

NEW QUESTION 4
Which HTTP error code corresponds to the ProxySG default exception identifier authentication failed?

• A. 403
• B. 404
• C. 503
• D. 401

Answer: D

NEW QUESTION 5
Which statement is true about a ProxySG with factory settings:

• A. To get network access, initial setup is necessary — ProxySG does not have an IP address until then
• B. Unconfigured ProxySG responds to some of the pre-built IP addresses, which are contained in the private IP address ranges 10.0.0.0/255.0.0.0 and 172.16.0.0/255.240.0.0 and 192.168.0.0/255.255.0.0 .
• C. Unconfigured ProxySG tries to obtain IP address from a DHCP server
• D. Unconfigured ProxySG sends RARP request to look up its IP address from the MAC address of its network interface car
• E. If it cannot get a valid IP address, initial setup is required.

Answer: A

NEW QUESTION 6
A ProxySG is designed to do which of the following? (Choose all that apply)
(a) Enhance security through authentication, virus scanning, and logging.
(b) Increase performance through TCP optimization, HTTP caching and pipelining.
(c) Control content with URL filtering, content stripping, and HTTP header analysis.

• A. a & b only
• B. b & c only
• C. a & c only
• D. All of the above

Answer: D

Explanation:
Reference:http://www.bluecoat.com/sites/default/files/product_tech_primers/Protocol_Opti mization.0.pdf(first page entirely.)

NEW QUESTION 7
Which protocol and port is used by Blue Coat Reporter service to display results?

• A. HTTP port 8987
• B. HTTP port 8443
• C. FTP port 8021
• D. SNMP port 161

Answer: A

Explanation:
Reference:http://forums.bluecoat.com/viewtopic.php?t=3031(post by pmorion)

NEW QUESTION 8
What are the types of challenges that can be authenticated by ProxySG? (Choose all that apply)
(a) Administrator attempts to access Management console
(b) user attempts to access the internet
(c) Administrator attempts to access SG via SSH
(d) User attempts to access a CIFS file server

• A. All of the above
• B. b, c &d only
• C. a, c & d only
• D. a, b & c only

Answer: D

Explanation:
Reference:https://kb.bluecoat.com/index?page=content&id=KB2877
Administrator doesn’t need to use authentication by ProxySG to access its ownmanagement console. The authentication used is a username password to access Management console.

NEW QUESTION 9
What happens, if there are multiple listeners to the same TCP port, and destination IP
address belongs to multiple IP address ranges?

• A. Such configuration is Inherently ambiguous and wrong
• B. Such cases cause built-in exceptions to be thrown during policy processing
• C. The most specific IP address range is always used

Answer: A

NEW QUESTION 10
What are the two hardware chassis options that are available in Blue Coat Director?
(Choose all that apply)
(a) SG210
(b) SG510
(c) SG800
(d) SG8100

• A. a & b only
• B. b & c only
• C. c & d only
• D. a & d only

Answer: B

Explanation:
Reference:http://www.bluecoat.com/support/eol-sg#director

NEW QUESTION 11
Consider an inline deployment — see figure.
Assume that a browser on Client0l is configured to use SG01 as an explicit proxy on port 8080.
The only service on SG01 set to Intercept is the HTTP service on port 8080 for the
<Transparent> destination address. Default policy is ALLOW and there is no custom policy. What will the user see in the browser window after requesting a Web page?

• A. A message "Proxy Server Refused Connection" or similar (depending on the browser being used).
• B. "Access denied" message due to policy DENY
• C. Nothing, there will be a timeout error
• D. The requested Web page will be served to the browser

Answer: D

NEW QUESTION 12
Which of the following tracks client-server requests and server responses?

• A. Event logs
• B. Sys logs
• C. Report logs
• D. Access logs

Answer: D

NEW QUESTION 13
Which statement is not true?

• A. A VLAN trunk is a physical link that connects two switches together.
• B. A VLAN trunk is used for frame-tagging.
• C. A trunk port connects to CIFS server.
• D. A trunk port erases the tag in a frame.

Answer: C

NEW QUESTION 14
What acceleration techniques are NOT part of MACHS?

• A. Bandwidth management (traffic shaping)
• B. Protocol optimization and compression
• C. IP layer route optimization
• D. Object caching
• E. Byte caching

Answer: C

Explanation:
Reference:http://www.edgeblue.com/Mach5.asp

NEW QUESTION 15
The bcreportermain_vl access log format has a configurable ordering of fields, and this custom order is reflected in a log file header.

• A. True
• B. False

Answer: B

NEW QUESTION 16
You can obtain support information without contacting anyone from Blue Coat support via Blue Coat's online tool, Instant Support.

• A. True
• B. False

Answer: B

Explanation:
Reference:http://forums.bluecoat.com/viewtopic.php?f=13&t=10989

NEW QUESTION 17
......