NEW QUESTION 1
Review the following exhibit.

Based on the exhibit, which output is produced in the Output panel?

• A. Hello
• B. Good Morning UiPath
• C. Good Morning
• D. UiPath

Answer: C

Explanation:
Based on the exhibit, the output produced in the Output panel is “Good Morning”. This is because the “If” activity checks if the “BoolFlag” variable is True. If it is True, the “Then” branch is executed, which contains a “Write Line” activity with the text “Good Morning”. If the “BoolFlag” variable is False, the “Else” branch is executed, which contains a “Write Line” activity with the text “UiPath”. Since the “BoolFlag” variable is assigned to True in the previous “Assign” activity, the condition of the “If” activity is satisfied, and the “Then” branch is executed. Therefore, the “Write Line” activity writes “Good Morning” to the Output panel4. References: If and How to put a if condition in assign activity? from UiPath documentation and forum.

NEW QUESTION 2
Data from an Excel file is read into a data table named "dtEmployee", as displayed in the following graphic:

A developer needs to filter the data table to obtain all rows representing employees from
the Finance and IT departments with a Salary under 30,000. Which expression yields the desired outcomes?

• A. dtEmployee.Select("([Department]='IT' AND [Department]='Finance') AND [Salary] < 30000")
• B. dtEmployee.Select("[Department]='IT' OR [Department]='Finance' AND [Salary] < 30000")
• C. dtEmployee.Select("([Department]='IT' OR [Department]='Finance') AND [Salary] < 30000")
• D. dtEmployee.Select("[Department]='IT' OR [Department]='Finance' OR [Salary] < 30000")

Answer: C

Explanation:
This expression filters the data table to obtain all rows representing employees from the Finance and IT departments with a Salary under 30,000. The expression uses the Select method of the data table, which returns an array of data rows that match a specified condition. The condition is written as a string that follows the syntax and rules of the DataColumn.Expression property. The condition uses parentheses to group the logical operators OR and AND, which have different precedence levels. The OR operator returns true if either operand is true, while the AND operator returns true only if both operands are true. The condition also uses single quotes to enclose the string values of the Department column, and the less than operator to compare the numeric values of the Salary
column. (UiPath Studio documentation1) References:
✑ 1: DataTable.Select Method (System.Data) | Microsoft Docs.

NEW QUESTION 3
A developer stored a UiPath Studio project remotely in GIT. Which feature allows the developer to view the project on their local machine?

• A. Clone Repository
• B. Copy to GIT
• C. Disconnect
• D. GIT Init

Answer: A

Explanation:
The Clone Repository feature allows the developer to copy a remote GIT repository to a local working directory. This way, the developer can view and edit the project on their local machine. The Copy to GIT feature allows the developer to copy the current project to an existing GIT repository. The Disconnect feature allows the developer to disconnect the current project from the GIT repository. The GIT Init feature allows the developer to add the current project to a local GIT repository. References: Managing Projects with GIT

NEW QUESTION 4
What is the default URL of the OCR server that runs the Computer Vision service?

• A. https://server.uipath.com/
• B. https://cvserver.uipath.com/
• C. https://cv.uipath.com/
• D. https://computervision.uipath.com/

Answer: C

Explanation:
The default URL of the OCR server that runs the Computer Vision service is https://cv.uipath.com/. This is the endpoint of the UiPath Computer Vision Cloud service, which provides OCR capabilities for document understanding and UI automation1. The other options are not valid URLs for the OCR server.
References:
✑ Document Understanding - UiPath.DocumentUnderstanding.OCR.LocalServer Activities documentation, Introduction section

NEW QUESTION 5
A developer intends to enter text into an input field using a combination of a string and a hotkey. The input action should take place within a hidden or minimized window.
Which input method(s) can be used individually for the Type Into activity?

• A. Simulate only.
• B. Simulate and Window Messages.
• C. Same as App/Browser and Simulate.
• D. Window Messages only.

Answer: B

Explanation:
The Type Into activity is used to enter text in a specified UI element, such as a text box. It has three input methods that can be selected from the properties panel: Default, Simulate, and Window Messages1. Each input method has different advantages and limitations, depending on the target application and the automation scenario2.
✑ The Default input method uses the hardware driver to simulate the keystrokes, as if a human user is typing on the keyboard. It is the most reliable and compatible input method, but it requires the target application to be in focus and visible on the screen. It also supports sending special keys, such as Tab or Enter, using brackets [k(enter)] or [k(tab)].
✑ The Simulate input method uses the technology of the target application to directly
inject the text into the UI element. It does not rely on the hardware driver, so it can work in the background, even if the target application is hidden or minimized. It also supports sending special keys using brackets [k(enter)] or [k(tab)]. However, it may not be compatible with some applications or UI elements that do not support this method.
✑ The Window Messages input method uses the Windows API to send messages
directly to the target application. It can also work in the background, even if the target application is hidden or minimized. It does not support sending special keys using brackets [k(enter)] or [k(tab)], but it can send them using modifiers such as
{ENTER} or {TAB}. However, it may not be compatible with some applications or UI elements that do not accept window messages.
Therefore, if a developer intends to enter text into an input field using a combination of a string and a hotkey, and the input action should take place within a hidden or minimized window, they can use either the Simulate or the Window Messages input method individually for the Type Into activity. They cannot use the Default input method, because it requires the target application to be in focus and visible on the screen. They also cannot use the Same as App/Browser input method, because it is not an option for the Type Into activity.
References:
✑ Type Into - UiPath Documentation Portal.
✑ What are different Input methods in UiPath - UiPath Community Forum.

NEW QUESTION 6
What is the purpose of the Interval filter in the Orchestrator's Monitoring page?

• A. It allows you to control the granularity of the displayed data and check the health of your system in either the last day or the last hour.
• B. It allows you to allocate licenses per machine for the displayed data.
• C. It allows you to choose between background and foreground processes for the displayed data.
• D. It enables you to sort the displayed data based on job priorities.

Answer: A

Explanation:
The Interval filter in the Orchestrator’s Monitoring page lets you select the time range for the data that is displayed on the dashboard1. You can choose between Last Day and Last Hour options to view the performance and health indicators of your system at different levels of detail2.
References:
✑ Monitoring documentation, Interval Filter section
✑ UiPath Orchestrator Monitoring video, 2:10 - 2:30

NEW QUESTION 7
A developer needs to prioritize automating several processes. To help prevent any long- term maintenance, which process attribute should be avoided?

• A. Logical decision points
• B. Repetitive business process
• C. Frequent application changes
• D. High volume work

Answer: C

Explanation:
Frequent application changes are a process attribute that should be avoided when prioritizing automating several processes. This is because frequent application changes can cause the automation to break or malfunction, and require constant maintenance and updates. Processes that are stable and consistent are more suitable for automation, as they reduce the risk of errors and rework. References: Process Selection
Criteria and Process Analysis from UiPath documentation.

NEW QUESTION 8
In the Output property of all Get Mail activities, what is the supported variable type?

• A. String
• B. List<String>
• C. MailMessage
• D. List<MailMessage>

Answer: D

Explanation:
In the Output property of all Get Mail activities, the supported variable type is List<MailMessage>. The Output property is the property that stores the result of the activity in a variable. The Get Mail activities are the activities that retrieve email messages from various mail servers, such as POP3, IMAP, Outlook, or Exchange. The result of the Get Mail activities is a collection of email messages that match the specified criteria, such as the mail folder, the filter, or the top count. The collection of email messages is represented by the List<MailMessage> type, which is a generic list that contains MailMessage objects. A MailMessage object is a class that represents an email message, with properties such as Subject, Body, Attachments, From, To, etc1. For example, if the Get Mail activity is used to retrieve the email messages from the Inbox folder of an Outlook account, the Output property can be configured with a variable of type List<MailMessage>, such as mailList. The mailList variable will store the email messages as a list of MailMessage objects, which can then be accessed or manipulated using other activities, such as For Each, Save Attachments, or Send Mail2.
References: MailMessage Class and Get Outlook Mail Messages from UiPath documentation

NEW QUESTION 9
A developer has created an automation process that includes:



Based on the information shown in the exhibits, what is the output of the Write Line activity in the Main xaml file?

• A. Apple
• B. Orange
• C. Apple Orange
• D. Orange Apple

Answer: B

Explanation:
The Write Line activity is used to write a specified text to the Output panel. The text can be a string literal, a variable, or an expression. In this case, the Write Line activity in the Main xaml file has the text "out_ShoppingBasket + “, “Orange””. The out_ShoppingBasket is a variable of type String, which is declared in the Main xaml file and has the default value of “Apple”. The variable is passed as an argument to the SuperMarket xaml file, where it is assigned a new value of “Orange”. The argument direction is Out, which means that the value of the argument is passed back to the Main xaml file after the execution of the SuperMarket xaml file. Therefore, the value of the out_ShoppingBasket variable in the Main xaml file is changed from “Apple” to “Orange”. The expression "out_ShoppingBasket + “, “Orange”” concatenates the value of the out_ShoppingBasket variable with a comma and a space, followed by the string literal “Orange”. The result of this expression is “Orange, Orange”. The Write Line activity writes this text to the Output panel. Therefore, the answer is B. Orange. References: Write Line, Variables, Arguments

NEW QUESTION 10
The Extract PDF Page Range activity is used to extract a specific set of pages from a PDF file. Which of the following statements correctly describes this activity?

• A. OutputFileName argument is optional.
• B. Range argument accepts complex range values or "All".
• C. PageCount argument outputs the number of extracted pages.
• D. Password-protected PDF files cannot be processed with this activity.

Answer: B

Explanation:
The Extract PDF Page Range activity is used to extract a specific set of pages from a PDF file and save them as a new PDF file1. The OutputFileName argument is required and specifies the path and name of the new PDF file1. The Range argument accepts complex range values or “All” to indicate which pages to extract12. For example, “1-3,5,7-9” will extract pages 1 to 3, 5, and 7 to 92. The PageCount argument outputs the number of pages in the original PDF file, not the extracted pages1. Password-protected PDF files can be processed with this activity by using the Password argument to provide the password1.
References: Extract PDF Page Range documentation, Extract PDF Page Range example.

NEW QUESTION 11
DRAG DROP
A developer needs to take a screenshot of the state of the machine while the robot is
running and then send the screenshot as an email. What is the correct sequence of steps that should be performed?
Instructions: Drag the Description found on the left and drop on the correct Step found on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12
What is the purpose of the Invoke Code activity in UiPath?

• A. Invokes VB.NET or C# code, optionally passing it a list of input arguments.
• B. Invokes VB.NET or Java code, optionally passing it a list of input arguments.
• C. Invokes VB.NET code, optionally passing it a list of input arguments.
• D. Invokes Java code, optionally passing it a list of input arguments.

Answer: A

Explanation:
The Invoke Code activity in UiPath is an activity that allows developers to execute custom code written in VB.NET or C# within a workflow. The activity can accept a list of input arguments and return a list of output arguments, which can be used to exchange data between the code and the workflow. The activity can also access the variables and arguments defined in the current scope of the workflow. The Invoke Code activity can be useful for scenarios where the existing activities do not meet the specific requirements or logic of the automation process. (UiPath Automation Developer study guide)
References:
✑ Invoke Code
✑ How To Use Invoke Code Activity - In UiPath

NEW QUESTION 13
A developer initialized a String array, listOfMonthsByQuarter = {"1", "2", "3"} Which data type and value are retrieved when listOfMonthsByQuarter(2) is used at runtime?

• A. Data Type Int32 Value: 2
• B. Data Type- Int32 Value: 3
• C. Data Type: String Valu
• D. 2
• E. Data Typ
• F. String: Value 3

Answer: D

Explanation:
The listOfMonthsByQuarter variable is a String array, which means it can store multiple values of type String. Each value in the array has an index, which is a number that indicates its position in the array. The index starts from 0, so the first value has index 0, the second value has index 1, and so on. To access a specific value in the array, we can use the syntax arrayName(index). For example, listOfMonthsByQuarter(0) will return the first value in the array, which is “1”. Similarly, listOfMonthsByQuarter(2) will return the third value in the array, which is “3”. Therefore, the data type of listOfMonthsByQuarter(2) is
String, and the value is “3”. References: Arrays and Variables from UiPath documentation.

NEW QUESTION 14
What is a pre-requisite for running functional test cases in REFramework?

• A. Invoke Process XAML file
• B. Invoke InitAllSettings XAML file
• C. Invoke SetTransactionStatus XAML file
• D. Invoke Main XAML file

Answer: B

Explanation:
A pre-requisite for running functional test cases in REFramework is to invoke the InitAllSettings XAML file, which initializes the application, reads the configuration file, and sets the log level. This file is invoked in the Init state of the Main XAML file, which is the entry point of the REFramework. By invoking the InitAllSettings file, you can ensure that the test cases have access to the necessary settings and parameters for the automation project. (UiPath Studio - Testing Frameworks - UiPath Academy)
References:
✑ Studio - Testing Frameworks - UiPath Documentation Portal
✑ UiPath Studio - Testing Frameworks - UiPath Academy
✑ REFramework documentation.pdf - Google Drive

NEW QUESTION 15
What are the primary functions of the UiPath Integration Service?

• A. Automates Ul design, manages API connections, provides limited activities and events, simplifies automation design.
• B. Enables automation with API integration, manages connections with user-provided authentication, kicks off automations based on application-specific triggers, simplifies automation design with the help of third-party libraries.
• C. Enables automation with a library of connectors, manages connections easily with standardized authentication, kicks off automations with server-side triggers or events, provides curated activities and events, simplifies automation design.
• D. Enables automation with UI components, manages API keys, kicks off automations with client-side triggers, provides curated events.

Answer: C

Explanation:
UiPath Integration Service is a new feature that allows developers to create and manage integrations with various applications and systems using UI and API automation. It offers a library of connectors that simplify the authentication and connection process, as well as activities and events that enable data exchange and automation triggering. It also supports server-side triggers that can start automations based on events from other systems. (UiPath Automation Developer study guide)
References:
✑ Introducing UiPath Integration Service
✑ UiPath Integration Service

NEW QUESTION 16
A developer has created a string array variable as shown below: UserNames = {"Jane", "Jack", "Jill", "John"}
Which expression should the developer use in a Log Message activity to print the elements of the array separated by the string ", "?

• A. String.Join(UserNames, ",")
• B. String.Join(", ", UserNames)
• C. String.Concat(UserNames,",")
• D. String.Concat(",", UserNames)

Answer: B

Explanation:
The String.Join method takes two parameters: a separator and an array of strings. It returns a new string that concatenates the elements of the array using the separator. The correct syntax is String.Join(separator, array). Therefore, option B is the correct answer. References:
✑ Automation Developer Associate Training course, Section 1: Data Manipulation,
Lecture: Data Manipulation with Strings in Studio
✑ How to use Array of string forum post, Answer by @balupad14

NEW QUESTION 17
A developer is using the Step Out action in Debug mode to review a process as shown in the following exhibit.

Which functionality does the Step Out action provide?

• A. Pauses at an activity that caused an error
• B. Re-executes the activity which threw an exception
• C. Executes only one activity at a time and then pauses
• D. Executes activities in the current container and then pauses

Answer: D

Explanation:
The Step Out action is used for stepping out and pausing the execution at the level of the current container. Step Out completes the execution of activities in the current container, before pausing the debugging. This option works well with nested sequences1. In the exhibit, the Step Out action will execute all the activities inside the Sequence container and then pause at the next activity in the Main workflow. References: Debugging Actions from UiPath documentation.

NEW QUESTION 18
A developer wants to run two processes on the same machine, the first process contains only HTTP Request activities and the second one performs UI Automation. What option needs to be enabled on the first process in order to ensure that the processes can run concurrently on the same machine?

• A. Starts in Background
• B. Attended Automation
• C. Disable Pause
• D. Supports Persistence

Answer: A

Explanation:
The Starts in Background option is a property of the process that indicates whether the process can run in parallel with other processes on the same machine. If this option is enabled, the process can run as a background process, meaning that it does not require user interaction or UI automation. This allows the process to run concurrently with another process that performs UI automation, such as the second process in the question. The Starts in Background option can be configured in the project settings of the process in UiPath Studio, or in the process settings in Orchestrator.
References:
✑ Background Process - UiPath Studio
✑ Background Process Automation - UiPath Robot
✑ Managing Processes - UiPath Orchestrator

NEW QUESTION 19
In the context of the REFramework, if the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, what will be the behavior at run time?

• A. The flow will throw an exception in InitAllSettings workflow.
• B. The flow will use the value from the Settings sheets since the asset is missing.
• C. An empty string will be saved for the "OrchestratorQueueName" key in the config dictionary.
• D. The "OrchestratorQueueName" key is not added to the config dictionary and the flow willthrow in Get Transaction Data workflow.

Answer: B

Explanation:
The REFramework template is a robust and scalable framework for building RPA projects1. It uses a config file to store the settings and constants that are used throughout the project2. The config file has two sheets: Settings and Assets. The Settings sheet contains the key-value pairs that are read by the InitAllSettings workflow and stored in the config dictionary. The Assets sheet contains the names of the assets that are stored in Orchestrator and need to be retrieved by the InitAllApplications workflow. The OrchestratorQueueName key is used to specify the name of the queue that is used to store the transaction items for the process. If the OrchestratorQueueName key is present in both the Settings and Assets sheets, but an asset with the corresponding name is not present in Orchestrator, the behavior at run time will be as follows:
✑ The InitAllSettings workflow will read the value of the OrchestratorQueueName key
from the Settings sheet and store it in the config dictionary.
✑ The InitAllApplications workflow will try to retrieve the asset with the name OrchestratorQueueName from Orchestrator using the Get Asset activity. Since the asset does not exist, the activity will throw an exception.
✑ The exception will be caught by a Try Catch block and handled by a Log Message activity with level Warning and message “Asset not found: OrchestratorQueueName”.
✑ The flow will continue with the next asset in the Assets sheet or move to the next state if there are no more assets.
✑ The flow will use the value of the OrchestratorQueueName key from the config dictionary whenever it needs to access or update the queue.
Therefore, option B is correct. Option A is incorrect because the exception is thrown in InitAllApplications workflow, not InitAllSettings workflow. Option C is incorrect because an empty string is not saved for the OrchestratorQueueName key in the config dictionary. Option D is incorrect because the OrchestratorQueueName key is added to the config dictionary and the flow does not throw in Get Transaction Data workflow.
References:
✑ How to Use Enhanced REFramework to Implement UiPath Projects article from UiPath
✑ Config.xlsx documentation from UiPath
✑ [InitAllSettings.xaml] documentation from UiPath
✑ [InitAllApplications.xaml] documentation from UiPath
✑ [TransactionItem Variable] documentation from UiPath

NEW QUESTION 20
......