NEW QUESTION 1
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

• A. Re-add all Veeam components involved in data transfer through the required interfaces
• B. Update routing tables on the components involved in data transfer
• C. Create a global network traffic rule, set appropriate source and target IP range
• D. Use the preferred network settings to switch to data network for the backup traffic

Answer: C

NEW QUESTION 2
A backup administrator has replicated a virtual machine between two Hyper-V hosts and now would like to automatically verify the recoverability of the replica. What would they need to do?

• A. It is not supported to perform SureBackup replica testing for Hyper-V
• B. Create a virtual switch with no uplinks and start the virtual machine connected to the new switch
• C. Create a virtual lab and an application group; create a SureBackup for the replica job and run it once a day
• D. Start the virtual machine manually using the universal application item recovery wizard

Answer: A

NEW QUESTION 3
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?

• A. Create an application group and leverage regular replica restore points as the source for the application group
• B. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
• C. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
• D. Create an application group and leverage regular backup restore points as the source for the application group

Answer: D

NEW QUESTION 4
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?

• A. VIB files (metadata and data)
• B. VBM files (metadata only)
• C. VIB and VBK files (metadata only)
• D. VBK files (metadata and data)
• E. VIB and VBK files (data blocks only)

Answer: C

NEW QUESTION 5
When configuring a SureBackup job, what are some of the criteria for adding servers to an application group? (Choose two.)

• A. VMs cannot be encrypted
• B. VM backups must reside on the same repository
• C. VMs cannot be added to an application group twice
• D. VMs must be running the same OS version
• E. VMs must have at least one valid restore point

Answer: CE

NEW QUESTION 6
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?

• A. The disks being processed are IDE and/or SATA
• B. The datastores are properly zoned and exposed to the proxy server but in read-only mode
• C. The storage is not added into the storage infrastructure, inside the backup and replication console
• D. Write access has not been enabled on the SAN
• E. One or more of the VM disk(s) are on Wols

Answer: D

NEW QUESTION 7
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?

• A. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
• B. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
• C. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
• D. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain

Answer: C

NEW QUESTION 8
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)

• A. Advanced multi-host (automatic configuration)
• B. Advanced single-host (automatic configuration)
• C. Basic single-host (automatic configuration)
• D. Advanced multi-host (manual configuration)
• E. Advanced single-host (manual configuration)

Answer: AC

NEW QUESTION 9
A backup administrator needs to restore two data drives to a VM where the operating system remains intact. The target machine must remain powered on. What recovery option is most appropriate to perform this operation?

• A. Instant VM Recovery
• B. Instant disk recovery
• C. Restore entire VM
• D. Restore VM files

Answer: A

NEW QUESTION 10
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks: 192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is 172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query. Which of the following virtual lab types must be configured?

• A. Advanced multi-host
• B. Advanced single-host
• C. All virtual lab configurations would support that
• D. Basic single-host

Answer: B

NEW QUESTION 11
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)

• A. The backup copy job creates a forever forward incremental backup chain
• B. The backup copy job creates a single file with multiple restore points included within for archival purposes
• C. During the backup copy job process, a VM snapshot is created for consistency
• D. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
• E. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository

Answer: AD

NEW QUESTION 12
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?

• A. The old restore points will be deleted after the new restore chain meets the retention policy
• B. Per VM backup files are enabled in the repository
• C. The other restore points are weekly full backups, this is expected
• D. You should configure the synthetic full backup to be performed on Mondays instead

Answer: C

NEW QUESTION 13
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor. When troubleshooting a performance event from two days ago, what will they see?

• A. Aggregated data every two hours
• B. Data does not exist
• C. Raw data every 20 seconds
• D. Aggregated data every five minutes

Answer: A

NEW QUESTION 14
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?

• A. Failover
• B. Permanent failover
• C. Commit failback
• D. Failback to production
• E. Planned failover
• F. Undo failover

Answer: C

NEW QUESTION 15
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?

• A. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
• B. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
• C. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
• D. In the virtual machines setting of the job, add a script in the scripts tab under ??Run the following script before the job:??

Answer: C

NEW QUESTION 16
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?

• A. Reverse incremental with periodic active full backups
• B. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
• C. Forward incremental with optional periodic synthetic and/or active full backups
• D. Reverse incremental with optional periodic synthetic full backups

Answer: D

NEW QUESTION 17
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?

• A. A distributed virtual switch with uplink(s)
• B. A standard virtual switch with uplink(s)
• C. A distributed virtual switch without uplink(s)
• D. A standard virtual switch without uplink(s)

Answer: B

NEW QUESTION 18
Which backup method produces a backup chain that consists of the first full backup file (VBK) and a set of incremental backup files (VIB) following it? Additionally, the backup chain contains synthetic full and/or active full backup files that divide the backup chain into shorter series.

• A. Forward incremental backup
• B. Differential incremental backup
• C. Reverse incremental backup
• D. Forever forward incremental backup

Answer: A

NEW QUESTION 19
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?

• A. Use the Veeam Explorer for Active Directory to recover the domain controller
• B. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
• C. Perform a bare metal recovery of their domain controller back to the original system
• D. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2

Answer: B

NEW QUESTION 20
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the ??failback?? action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?

• A. Data from 1 a.
• B. to 7 a.
• C. Data from 1 a.
• D. to 2 p.
• E. Data from 8 a.
• F. to 2 p.m.
• G. Data from 7 a.
• H. to 8 a.m.

Answer: B

NEW QUESTION 21
......