NEW QUESTION 1
HOTSPOT
You are evaluating the security of the network communication between the virtual machines in Sub2. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
NSG1 has the inbound security rules shown in the following table.

NSG2 has the inbound security rules shown in the following table.

Box 2: Yes
Box 3: No Note:
Sub2 contains the virtual machines shown in the following table.


Sub2 contains the network security groups (NSGs) shown in the following table.

Question Set 3

NEW QUESTION 2
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
Assignment: Include Group1, Exclude Group2 Conditions: Sign-in risk of Medium and above Access: Allow access, Require password change
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
User1 is member of Group1. Sign in from unfamiliar location is risk level Medium.
Box 2: Yes
User2 is member of Group1. Sign in from anonymous IP address is risk level Medium.
Box 3: No
Sign-ins from IP addresses with suspicious activity is low.
Note:

Azure AD Identity protection can detect six types of suspicious sign-in activities: Users with leaked credentials
Sign-ins from anonymous IP addresses Impossible travel to atypical locations Sign-ins from infected devices
Sign-ins from IP addresses with suspicious activity Sign-ins from unfamiliar locations
These six types of events are categorized in to 3 levels of risks – High, Medium & Low: References:
http://www.rebeladmin.com/2021/09/step-step-guide-configure-risk-based-azure-conditional-access-policies/

NEW QUESTION 3
Your company uses Azure DevOps.
You need to recommend a method to validate whether the code meets the company’s quality standards and code review standards. What should you recommend implementing in Azure DevOps?

• A. branch folders
• B. branch permissions
• C. branch policies
• D. branch locking

Answer: C

Explanation:
Branch policies help teams protect their important branches of development. Policies enforce your team's code quality and change management standards.
References:
https://docs.microsoft.com/en-us/azure/devops/repos/git/branch-policies?view=azure-devops&viewFallbackFrom=vsts

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Subscription named Sub1.
You have an Azure Storage account named Sa1 in a resource group named RG1.
Users and applications access the blob service and the file service in Sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service.
You need to revoke all access to Sa1. Solution: You generate new SASs. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Instead you should create a new stored access policy.
To revoke a stored access policy, you can either delete it, or rename it by changing the signed identifier. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or renaming the stored access policy immediately affects all of the shared access signatures associated with it.
References:
https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy

NEW QUESTION 5
You have Azure Resource Manager templates that you use to deploy Azure virtual machines.
You need to disable unused Windows features automatically as instances of the virtual machines are provisioned. What should you use?

• A. device compliance policies in Microsoft Intune
• B. Azure Automation State Configuration
• C. application security groups
• D. Azure Advisor

Answer: B

Explanation:
You can use Azure Automation State Configuration to manage Azure VMs (both Classic and Resource Manager), on-premises VMs, Linux machines, AWS VMs, and on-premises physical machines.
Note: Azure Automation State Configuration provides a DSC pull server similar to the Windows Feature DSC-Service so that target nodes automatically receive configurations, conform to the desired state, and report back on their compliance. The built-in pull server in Azure Automation eliminates the need to set up and
maintain your own pull server. Azure Automation can target virtual or physical Windows or Linux machines, in the cloud or on-premises.
References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started

NEW QUESTION 6
HOTSPOT
You have two Azure virtual machines in the East US2 region as shown in the following table.

You deploy and configure an Azure Key vault.
You need to ensure that you can enable Azure Disk Encryption on VM1 and VM2.
What should you modify on each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
VM1: The Tier
The Tier needs to be upgraded to standard.
Disk Encryption for Windows and Linux IaaS VMs is in General Availability in all Azure public regions and Azure Government regions for Standard VMs and VMs with Azure Premium Storage.
VM2: The type
Need to change the VMtype to any of A, D, DS, G, GS, F, and so on, series IaaS VMs.
Not the operating system version: Ubuntu 16.04 is supported. References:
https://docs.microsoft.com/en-us/azure/security/azure-security-disk-encryption-overview
https://docs.microsoft.com/en-us/azure/security/azure-security-disk-encryption-faq#bkmk_LinuxOSSupport

NEW QUESTION 7
You need to ensure that you can meet the security operations requirements.
What should you do first?

• A. Turn on Auto Provisioning in Security Center.
• B. Integrate Security Center and Microsoft Cloud App Security.
• C. Upgrade the pricing tier of Security Center to Standard.
• D. Modify the Security Center workspace configuration.

Answer: C

Explanation:
The Standard tier extends the capabilities of the Free tier to workloads running in private and other public clouds, providing unified security management and threat protection across your hybrid cloud workloads. The Standard tier also adds advanced threat detection capabilities, which uses built-in behavioral analytics and machine learning to identify attacks and zero-day exploits, access and application controls to reduce exposure to network attacks and malware, and more.
Scenario: Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center. References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-pricing
Question Set 3

NEW QUESTION 8
HOTSPOT
You suspect that users are attempting to sign in to resources to which they have no access.
You need to create an Azure Log Analytics query to identify failed user sign-in attempts from the last three days. The results must only show users who had more than five failed sign-in attempts.
How should you configure the query? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
The following example identifies user accounts that failed to log in more than five times in the last day, and when they last attempted to log in. let timeframe = 1d;
SecurityEvent
| where TimeGenerated > ago(1d)
| where AccountType == 'User' and EventID == 4625 // 4625 - failed log in
| summarize failed_login_attempts=count(), latest_failed_login=arg_max(TimeGenerated, Account) by Account
| where failed_login_attempts > 5
| project-away Account1
References:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/examples

NEW QUESTION 9
HOTSPOT
You have an Azure subscription that contains the virtual machines shown in the following table.

You create the Azure policies shown in the following table.

You create the resource locks shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

References:
https://docs.microsoft.com/en-us/azure/governance/blueprints/concepts/resource-locking

NEW QUESTION 10
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
You are assigned the Global administrator role for the tenant. You are responsible for managing Azure Security Center settings. You need to create a custom sensitivity label.
What should you do first?

• A. Create a custom sensitive information type.
• B. Elevate access for global administrators in Azure AD.
• C. Upgrade the pricing tier of the Security Center to Standard.
• D. Enable integration with Microsoft Cloud App Security.

Answer: A

Explanation:
First, you need to create a new sensitive information type because you can't directly modify the default rules.
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/customize-a-built-in-sensitive-information-type

NEW QUESTION 11
From the Azure portal, you are configuring an Azure policy.
You plan to assign policies that use the DeployIfNotExist, AuditIfNotExist, Append, and Deny effects. Which effect requires a managed identity for the assignment?

• A. AuditIfNotExist
• B. Append
• C. DeployIfNotExist
• D. Deny

Answer: C

Explanation:
When Azure Policy runs the template in the deployIfNotExists policy definition, it does so using a managed identity.
References:
https://docs.microsoft.com/bs-latn-ba/azure/governance/policy/how-to/remediate-resources

NEW QUESTION 12
DRAG DROP
You have an Azure subscription named Sub1 that contains an Azure Storage account named Contosostorage1 and an Azure key vault named Contosokeyvault1. You plan to create an Azure Automation runbook that will rotate the keys of Contosostorage1 and store them in Contosokeyvault1.
You need to implement prerequisites to ensure that you can implement the runbook.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Step 1: Create an Azure Automation account
Runbooks live within the Azure Automation account and can execute PowerShell scripts.
Step 2: Import PowerShell modules to the Azure Automation account
Under ‘Assets’ from the Azure Automation account Resources section select ‘to add in Modules to the runbook. To execute key vault cmdlets in the runbook, we need to add AzureRM.profile and AzureRM.key vault.
Step 3: Create a connection resource in the Azure Automation account
You can use the sample code below, taken from the AzureAutomationTutorialScript example runbook, to authenticate using the Run As account to manage Resource Manager resources with your runbooks. The AzureRunAsConnection is a connection asset automatically created when we created ‘run as accounts’ above. This can be found under Assets -> Connections. After the authentication code, run the same code above to get all the keys from the vault.
$connectionName = "AzureRunAsConnection" try
{
# Get the connection "AzureRunAsConnection "
$servicePrincipalConnection=Get-AutomationConnection -Name $connectionName
"Logging in to Azure..." Add-AzureRmAccount `
-ServicePrincipal `
-TenantId $servicePrincipalConnection.TenantId `
-ApplicationId $servicePrincipalConnection.ApplicationId `
-CertificateThumbprint $servicePrincipalConnection.CertificateThumbprint
}
References:
https://www.rahulpnath.com/blog/accessing-azure-key-vault-from-azure-runbook/

NEW QUESTION 13
Your company has an Azure subscription named Sub1 that is associated to an Azure Active Directory Azure (Azure AD) tenant named contoso.com.
The company develops a mobile application named App1. App1 uses the OAuth 2 implicit grant type to acquire Azure AD access tokens. You need to register App1 in Azure AD.
What information should you obtain from the developer to register the application?

• A. a redirect URI
• B. a reply URL
• C. a key
• D. an application ID

Answer: A

Explanation:
For Native Applications you need to provide a Redirect URI, which Azure AD will use to return token responses.
References:
https://docs.microsoft.com/en-us/azure/active-directory/develop/v1-protocols-oauth-code

NEW QUESTION 14
You need to ensure that User2 can implement PIM.
What should you do first?

• A. Assign User2 the Global administrator role.
• B. Configure authentication methods for contoso.com.
• C. Configure the identity secure score for contoso.com.
• D. Enable multi-factor authentication (MFA) for User2.

Answer: A

Explanation:
To start using PIM in your directory, you must first enable PIM.
1. Sign in to the Azure portal as a Global Administrator of your directory.
You must be a Global Administrator with an organizational account (for example, @yourdomain.com), not a Microsoft account (for example, @outlook.com), to enable PIM for a directory.
Scenario: Technical requirements include: Enable Azure AD Privileged Identity Management (PIM) for contoso.com References:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-getting-started

NEW QUESTION 15
You are testing an Azure Kubernetes Service (AKS) cluster. The cluster is configured as shown in the exhibit. (Click the Exhibit tab.)

You plan to deploy the cluster to production. You disable HTTP application routing.
You need to implement application routing that will provide reverse proxy and TLS termination for AKS services by using a single IP address. What should you do?

• A. Create an AKS Ingress controller.
• B. Install the container network interface (CNI) plug-in.
• C. Create an Azure Standard Load Balancer.
• D. Create an Azure Basic Load Balancer.

Answer: A

Explanation:
An ingress controller is a piece of software that provides reverse proxy, configurable traffic routing, and TLS termination for Kubernetes services.
References:
https://docs.microsoft.com/en-us/azure/aks/ingress-tls

NEW QUESTION 16
Your network contains an on-premises Active Directory domain named corp.contoso.com.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. You sync all on-premises identities to Azure AD.
You need to prevent users who have a givenName attribute that starts with TEST from being synced to Azure AD. The solution must minimize administrative effort. What should you use?

• A. Synchronization Rules Editor
• B. Web Service Configuration Tool
• C. the Azure AD Connect wizard
• D. Active Directory Users and Computers

Answer: A

Explanation:
Use the Synchronization Rules Editor and write attribute-based filtering rule.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-sync-change-the-configuration

NEW QUESTION 17
HOTSPOT
Which virtual networks in Sub1 can User2 modify and delete in their current state? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box 1: VNET4 and VNET1 only
RG1 has only Delete lock, while there are no locks on RG4. RG2 and RG3 both have Read-only locks.
Box 2: VNET4 only
There are no locks on RG4, while the other resource groups have either Delete or Read-only locks.
Note: As an administrator, you may need to lock a subscription, resource group, or resource to prevent other users in your organization from accidentally deleting or modifying critical resources. You can set the lock level to CanNotDelete or ReadOnly. In the portal, the locks are called Delete and Read-only respectively.
CanNotDelete means authorized users can still read and modify a resource, but they can't delete the resource.
ReadOnly means authorized users can read a resource, but they can't delete or update the resource. Applying this lock is similar to restricting all authorized users to the permissions granted by the Reader role.
Scenario:
User2 is a Security administrator.
Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6.
User2 creates the virtual networks shown in the following table.

Sub1 contains the locks shown in the following table.

References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources
Testlet 2
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area.
Existing Environment
Litware has an Azure subscription named Sub1 that has a subscription ID of 43894a43-17c2-4a39-8cfc-3540c2653ef4.
Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) is activated.
The tenant contains the groups shown in the following table.

The Azure subscription contains the objects shown in the following table.

Azure Security Center is set to the Free tier.
Planned changes
Litware plans to deploy the Azure resources shown in the following table.

Litware identifies the following identity and access requirements:
All San Francisco users and their devices must be members of Group1.
The members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment.
Users must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users’ behalf.
Platform Protection Requirements
Litware identifies the following platform protection requirements:
Microsoft Antimalware must be installed on the virtual machines in Resource Group1.
The members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role. Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
Following the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.
A new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center.

NEW QUESTION 18
You have an Azure subscription named Sub1 that contains an Azure Log Analytics workspace named LAW1.
You have 100 on-premises servers that run Windows Server 2012 R2 and Windows Server 2021. The servers connect to LAW1. LAW1 is configured to collect security-related performance counters from the connected servers.
You need to configure alerts based on the data collected by LAW1. The solution must meet the following requirements:
Alert rules must support dimensions.
The time it takes to generate an alert must be minimized.
Alert notifications must be generated only once when the alert is generated and once when the alert is resolved.
Which signal type should you use when you create the alert rules?

• A. Log
• B. Log (Saved Query)
• C. Metric
• D. Activity Log

Answer: C

Explanation:
Metric alerts in Azure Monitor provide a way to get notified when one of your metrics cross a threshold. Metric alerts work on a range of multi-dimensional platform metrics, custom metrics, Application Insights standard and custom metrics.
Note: Signals are emitted by the target resource and can be of several types. Metric, Activity log, Application Insights, and Log. References:
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/alerts-metric

NEW QUESTION 19
Your company plans to create separate subscriptions for each department. Each subscription will be associated to the same Azure Active Directory (Azure AD) tenant.
You need to configure each subscription to have the same role assignments. What should you use?

• A. Azure Security Center
• B. Azure Blueprints
• C. Azure AD Privileged Identity Management (PIM)
• D. Azure Policy

Answer: C

Explanation:
The Azure AD Privileged Identity Management (PIM) service also allows Privileged Role Administrators to make permanent admin role assignments.
References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-add-role-to-user

NEW QUESTION 20
You need to ensure that users can access VM0. The solution must meet the platform protection requirements.
What should you do?

• A. Move VM0 to Subnet1.
• B. On Firewall, configure a network traffic filtering rule.
• C. Assign RT1 to AzureFirewallSubnet.
• D. On Firewall, configure a DNAT rule.

Answer: A

Explanation:
Azure Firewall has the following known issue:
Conflict with Azure Security Center (ASC) Just-in-Time (JIT) feature.
If a virtual machine is accessed using JIT, and is in a subnet with a user-defined route that points to Azure Firewall as a default gateway, ASC JIT doesn’t work. This is a result of asymmetric routing – a packet comes in via the virtual machine public IP (JIT opened the access), but the return path is via the firewall, which drops the packet because there is no established session on the firewall.
Solution: To work around this issue, place the JIT virtual machines on a separate subnet that doesn’t have a user-defined route to the firewall. Scenario:

Following the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.

References:
https://docs.microsoft.com/en-us/azure/firewall/overview
Testlet 2
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the
time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York. The company hosts its entire server infrastructure in Azure.
Contoso has two Azure subscriptions named Sub1 and Sub2. Both subscriptions are associated to an Azure Active Directory (Azure AD) tenant named contoso.com.
Technical requirements
Contoso identifies the following technical requirements:
Deploy Azure Firewall to VNetWork1 in Sub2. Register an application named App2 in contoso.com.
Whenever possible, use the principle of least privilege.
Enable Azure AD Privileged Identity Management (PIM) for contoso.com
Existing Environment Azure AD
Contoso.com contains the users shown in the following table.

Contoso.com contains the security groups shown in the following table.

Sub1
Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. User2 creates the virtual networks shown in the following table.

Sub1 contains the locks shown in the following table.

Sub1 contains the Azure policies shown in the following table.

Sub2
Sub2 contains the network security groups (NSGs) shown in the following table.

NSG1 has the inbound security rules shown in the following table.

NSG2 has the inbound security rules shown in the following table.

NSG3 has the inbound security rules shown in the following table.

NSG4 has the inbound security rules shown in the following table.

NSG1, NSG2, NSG3, and NSG4 have the outbound security rules shown in the following table.

Contoso identifies the following technical requirements:
Deploy Azure Firewall to VNetwork1 in Sub2. Register an application named App2 in contoso.com.
Whenever possible, use the principle of least privilege.
Enable Azure AD Privileged Identity Management (PIM) for contoso.com.

NEW QUESTION 21
You need to configure WebApp1 to meet the data and application requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Upload a public certificate.
• B. Turn on the HTTPS Only protocol setting.
• C. Set the Minimum TLS Version protocol setting to 1.2.
• D. Change the pricing tier of the App Service plan.
• E. Turn on the Incoming client certificates protocol setting.

Answer: AC

Explanation:
A: To configure Certificates for use in Azure Websites Applications you need to upload a public Certificate.
C: Over time, multiple versions of TLS have been released to mitigate different vulnerabilities. TLS 1.2 is the most current version available for apps running on Azure App Service.
Incorrect Answers:
B: We need support the http url as well.
Note:

References:
https://docs.microsoft.com/en-us/azure/app-service/app-service-web-configure-tls-mutual-auth
https://azure.microsoft.com/en-us/updates/app-service-and-functions-hosted-apps-can-now-update-tls-versions/

NEW QUESTION 22
DRAG DROP
You have an Azure subscription that contains 100 virtual machines. Azure Diagnostics is enabled on all the virtual machines. You are planning the monitoring of Azure services in the subscription.
You need to retrieve the following details:
Identify the user who deleted a virtual machine three weeks ago.
Query the security events of a virtual machine that runs Windows Server 2021.
What should you use in Azure Monitor? To answer, drag the appropriate configuration settings to the correct details. Each configuration setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Box1: Activity log
Azure activity logs provide insight into the operations that were performed on resources in your subscription. Activity logs were previously known as “audit logs” or
“operational logs,” because they report control-plane events for your subscriptions.
Activity logs help you determine the “what, who, and when” for write operations (that is, PUT, POST, or DELETE). Box 2: Logs
Log Integration collects Azure diagnostics from your Windows virtual machines, Azure activity logs, Azure Security Center alerts, and Azure resource provider logs. This integration provides a unified dashboard for all your assets, whether they're on-premises or in the cloud, so that you can aggregate, correlate, analyze, and alert for security events.
References:
https://docs.microsoft.com/en-us/azure/security/azure-log-audit
Testlet 1
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area.
Existing Environment
Litware has an Azure subscription named Sub1 that has a subscription ID of 43894a43-17c2-4a39-8cfc-3540c2653ef4.
Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) is activated.
The tenant contains the groups shown in the following table.

The Azure subscription contains the objects shown in the following table.

Azure Security Center is set to the Free tier.
Planned changes
Litware plans to deploy the Azure resources shown in the following table.

Litware identifies the following identity and access requirements:
All San Francisco users and their devices must be members of Group1.
The members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment.
Users must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users’ behalf.
Platform Protection Requirements
Litware identifies the following platform protection requirements:
Microsoft Antimalware must be installed on the virtual machines in Resource Group1.
The members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role. Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
Following the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.
A new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center.

NEW QUESTION 23
DRAG DROP
Your company has an Azure Active Directory (Azure AD) tenant named contoso.com.
The company is developing an application named App1. App1 will run as a service on server that runs Windows Server 2021. App1 will authenticate to contoso.com and access Microsoft Graph to read directory data.
You need to delegate the minimum required permissions to App1.
Which three actions should you perform in sequence from the Azure portal? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Step 1: Create an app registration
First the application must be created/registered.
Step 2: Add an application permission
Application permissions are used by apps that run without a signed-in user present.
Step 3: Grant permissions
Incorrect Answers: Delegated permission
Delegated permissions are used by apps that have a signed-in user present.
Application Proxy:
Azure Active Directory's Application Proxy provides secure remote access to on-premises web applications.
References:
https://docs.microsoft.com/en-us/azure/active-directory/develop/v2-permissions-and-consent

NEW QUESTION 24
......