NEW QUESTION 1
According to the Enterprise Installation Standards (EIS), what is the minimum amount of time SunVTS should be run?

• A. 10 minutes
• B. 20 minutes
• C. 30 minutes
• D. 1 hour

Answer: D

NEW QUESTION 2
Why are Electrostatic Discharge (ESD) "softfailures" the most serious type of failures?

• A. The damage is not immediately noticed or detected.
• B. The damage is immediate and easily detected.
• C. The damage corrupts firmware.
• D. The damage results in the failure of the entire system.

Answer: A

NEW QUESTION 3
During an installation, you have selected two disks to be used for your ZFS root pool. What is the impact?

• A. Only single disk configurations are supported for the root pool, so Solaris will use the current boot disk for the root pool.
• B. Only single disk configurations are supported during the initial creation of a root poo
• C. Mirrored pools can only be created after the initial installation.
• D. A single ZFS volume will be used for the swap area and dump device.
• E. A mirrored two disk configuration is set up for the root pool.

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E19082-01/817-2271/ggset/index.html(bulleted point
#3, second para)

NEW QUESTION 4
As part of a server consolidation project, a customer would like to run Solaris 9-based applications on a SPARC T4 server. What technology is required?

• A. Oracle VM Server for SPARC
• B. Oracle Solaris Containers
• C. Dynamic Domains
• D. Oracle VirtualBox

Answer: A

NEW QUESTION 5
How many XAUI (10 GbE Attachment Unit Interfaces) ports are provided per SPARC T4 processor?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 6
Based on the Enterprise Installation Standards (EIS), why should Oracle Explorer Data Collector be run with the “-i” switch after initial system power-on and setup are complete?

• A. To remove confidential customer IP addresses from the Explorer output
• B. To provide a baseline of the initial system configuration
• C. To collect local Intelligent Platform management Interface (IPMI) data
• D. To collect remote Oracle ILOM snapshot data

Answer: C

NEW QUESTION 7
Identify two specification of the Enterprise Installation Standard (EIS) for Basic Solaris.

• A. It defines the process for downloading Solaris and related patches from the Oracle support web site
• B. It requires the Installer to use the appropriate his Installation checklists when Installing Solaris
• C. It mandates that Installers use the EIS-DVD during the Installation process
• D. It provide the guidelines and patch levels for Installing Solaris 8, 9, 10, or 11

Answer: B

NEW QUESTION 8
You have configured DNS and have determined that the services processor serial number for your target server is 0641AMA007. What is the host name of this server?

• A. SUN-0641AMA007
• B. SUNCMM0-0641AMA007
• C. SUNCMM1-0641AMA007
• D. SUNSP-0641AMA007

Answer: A

NEW QUESTION 9
Error conditions by POST, Oracle Solaris Predictive Self-Healing (PSH), and Oracle ILOM are forward to which component for fault handling?

• A. POST
• B. Oracle VTS
• C. Oracle ILOM
• D. Oracle Solaris PSH

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E23075_01/pdf/E23078.pdf(page 24, third para)

NEW QUESTION 10
What is out-of-order execution?

• A. A feature of certain processors, where instructions are processed based on the availability of data.
• B. A feature multicore processors, where a core can be given processing priority over the other cores.
• C. A memory architecture feature, where specific data can be delivered to processors at the fastest possible rate.
• D. A feature of certain operating systems, where programs are executed based on the availability of data.

Answer: C

NEW QUESTION 11
Which two tasks are required to install and configure Oracle VM Server for SARC Management Information Base (MIB) software?

• A. Install Oracle VM Server for SPARC MIB software on the primary and guest domains
• B. Install Oracle VM Server for SPARC MIB software on the primary domain only
• C. Load the Oracle VM Server for SPARC MIB module into the Oracle Solaris SMA
• D. Load the Oracle VM Server for SPARC MIB module into the Oracle Solaris FMA

Answer: BC

NEW QUESTION 12
If a fault includes a uuid and sunw-msg-id property, then the fault was detected by which of the following?

• A. SunVTS
• B. POST
• C. Solaris Predictive Self-Healing
• D. Oracle ILOM

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E19839-01/820-2181-15/820-2181-15.pdf(page 22, see the second row, second column of the table)

NEW QUESTION 13
Using the logical domainconfiguration below,what is the domain and virtual CPU corresponding to physical CPU number 5?

• A. domain primary, virtual CPU number 0
• B. domain primary, virtual CPU number 1
• C. domain ldg2, virtual CPU number 0
• D. domain ldg1, virtual CPU number 1

Answer: D

NEW QUESTION 14
System errorscan go undetected by the Oracle VTS test, since many are detected, managed, and reported by Oracle Solaris Predictive Self-Healing. What is one way to display these errors and faults?

• A. Review the VTS error file
• B. Review the output of fmdump
• C. Review the system log files
• D. Review the VTS kernel error log

Answer: D

NEW QUESTION 15
You are running Oracle Solaris on a SPARC T4 server and wish to enable network traffic control and guest domains. What action needs to be performed?

• A. Nothing, since networking between the control and guest domains are automatically enabled
• B. Add a virtual network device to each guest domain
• C. Configure the virtual switch device as a network device
• D. Set up an I/O domain that has direct access to a physical I/O device

Answer: B

NEW QUESTION 16
Activating Auto Service Request (ASR) Assets .

• A. Is done on the Asset only
• B. Is done on both the Asset and the ASR Manager system
• C. Is done on the ASR Manager system only
• D. Is done on My Oracle Support only

Answer: D

Explanation:

Reference:http://www.oracle.com/technetwork/systems/asr/overview/index.html(second para)

NEW QUESTION 17
You plan on creating a RAID volume to mirror the system disks. After you have selected a controller, what fcode command should be run to list the physical drivers on the controller?

• A. Show-devs
• B. Show-volume
• C. Show-children
• D. Show-drives

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E22985_01/pdf/E22989.pdf(page 23)

NEW QUESTION 18
When setting up Oracle VM Server for SPARC on a SPARC 14 server, you did not remove unneeded PCIe devices from control (primary) domain. What is the impact?

• A. PCIe devices from the control domain can no longer be used in I/O domain.
• B. Removing PCIe devices from the control domain for use in I/O domains requires a delayed reconfiguration and a reboot of the control domain.
• C. You can no longer migrate guest domains to another physical system by means of the domain migration Feature.
• D. There is no impact, as PCIe devices can be dynamically reassigned from the control domain to an I/O domain.

Answer: A

NEW QUESTION 19
You are troubleshooting an installation and have run Oracle Explorer Data Collector. What should you do with the output?

• A. Have it analyzed by the Oracle Risk Analysis Services (ORAS) knowledge engine.
• B. Have it analyzed by the Remote Diagnostic Agent (RDA) tool.
• C. Review the output and address the identified configuration errors.
• D. Calculate the system operational risk (e.g., the chance of the system to go out of service due to a hardware issue.)

Answer: C

NEW QUESTION 20
What role should you assign to a user account that limits users to viewing the state of all ILOM configuration properties, or to change their own passwords and session time-out properties?

• A. Read only (0)
• B. Reset and host control (r)
• C. Services (s)
• D. User management (u)

Answer: A

Explanation:

Reference: http://www.fujitsu.com/downloads/SPARCE/manuals/sparc-t5e/ilom3.0-concept- en-01.pdf(page 6)

NEW QUESTION 21
In the OpenBoot PROM environment, you used the“show-children” commandto list the physicaldrives on a specific RAID controller.Theoutput is below. Which command creates a RAID0 volume with targets 9 and a?

• A. 9 a create-raid0-volume
• B. Create raid-volume = 0 9 a
• C. 9 a create-raid-volume = 0
• D. Create raid0-volume = 9 a

Answer: A

Explanation:

Reference:http://docs.oracle.com/cd/E19836-01/E20746/z40001f31395336.html(see step 3)

NEW QUESTION 22
According to the Enterprise Installation Standards (EIS), what is the recommended minimum number of virtual CPUs that should be allocated to the control domain?

• A. 2 CPUs
• B. 4 CPUs
• C. 6 CPUs
• D. 8 CPUs

Answer: D

NEW QUESTION 23
......