NEW QUESTION 1

Which two clients could an Administrator use to add a new identity source to the vCenter Single Sign-On domain? (Choose two.)

• A. vSphere Client
• B. Platform Services Controller Web Interface
• C. vSphere Appliance Management Interface
• D. vSphere Web Client
• E. VMware Host Client

Answer: BC

NEW QUESTION 2

When troubleshooting VMware vCenter Server issues, which logging level provides maximum detail?

• A. info
• B. trivia
• C. error
• D. verbose

Answer: B

NEW QUESTION 3

When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)

• A. Use RVC to upgrade the hosts.
• B. Use the latest available ESXi version.
• C. Back up all VMs.
• D. Use only the “Full data migration” maintenance mode option.

Answer: BC

NEW QUESTION 4

A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors.
How can the administrator exclude the contractor group from some of the critical VMs?

• A. Remove permission for contractors on the cluster leve
• B. Apply permission on the critical VMs for noncontractors.
• C. Apply permission for both contractors and non-contractors on the cluster leve
• D. Remove permission on the critical VMs for contractors.
• E. Apply permission for both contractors and non-contractors on the VM
• F. Remove permission on the critical VMs for contractors.
• G. Apply permission for both contractors and non-contractors on the cluster level.

Answer: B

Explanation:
To exclude the contractor group simply apply permission for both contractors and non-contrators on the cluster level. After that, remove permissions on the critical VMs for contractors.

NEW QUESTION 5

What is the logical and physical sector size for 512e disks?

• A. Logical Sector Size 512 Physical Sector Size 512
• B. Logical Sector Size 512 Physical Sector Size 4096
• C. Logical Sector Size 4096 Physical Sector Size 4096
• D. Logical Sector Size 2048 Physical Sector Size 512

Answer: B

NEW QUESTION 6

An administrator has decided to use Auto Deploy in the environment.
Which two considerations must be taken into account before configuring Auto Deploy? (Choose two.)

• A. Hosts in a cluster must be connected to a Distributed Switch.
• B. Host profiles are not supported when using Auto Deploy.
• C. DHCP must be configured to support PXE boot.
• D. Storage DRS must be enabled.
• E. A TFTP server must be setup and running.

Answer: CE

NEW QUESTION 7

An administrator is in the process of deploying a new ESXi host.
-The host is able to be added to the vCenter Server’s inventory, but after a short period of time it shows as disconnected.
-The administrator is able to reconnect the host but it then disconnects again after a short period of time. Which is the problem?

• A. Port 902 UDP from the host to the vCenter Server is blocked
• B. Port 443 TCP from the host to the vCenter Server is blocked
• C. Port 902 TCP from the host to the vCenter Server is blocked
• D. Port 443 TCP from the vCenter Server to the host is blocked

Answer: A

Explanation:
On 902 port managed hosts send a regular heartbeat to the vCenter Server system. This port must not be blocked by firewalls between the server and the hosts or between hosts.

NEW QUESTION 8

Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)

• A. Disconnect ESXi host from vCenter.
• B. VMware Tools are installed in the virtual machine.
• C. Ensure that the system hardware complies with ESXi requirements.
• D. Back up the host.
• E. Check the interoperability of any other software integrated with vSphere.

Answer: CDE

NEW QUESTION 9

"OneAppServer" is a VM template stored in a content library named "LibraryOne," but the vSphere administrator is not able to use this template for deployment.
Why is the administrator unable to deploy OneAppServer?

• A. OneAppServer must be updated before it can be deployed.
• B. OneAppServer was imported from a local file on the system.
• C. LibraryOne is published and optimized for syncing over HTTP.
• D. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.

Answer: C

NEW QUESTION 10

Which two choices are applicable to vSphere Availability? (Choose two.)

• A. Admission Control
• B. Heartbeat Datastores
• C. VM Startup/Shutdown
• D. Power Management

Answer: AB

NEW QUESTION 11

Which two features require the use of Host Profiles? (Choose two.)

• A. vRealize Suite
• B. Auto Deploy
• C. shared storage
• D. Host Customization

Answer: BD

NEW QUESTION 12

In vSphere 6.5, a virtual machine is thinly-provisioned on a VMFS6 datastore. The administrator deleted a large file within the guest OS. The freed blocks in the datastore are no longer needed by the VM.
Which feature in vSphere 6.5 allows the backing storage to automatically reclaim the freed blocks?

• A. ATS
• B. Defrag
• C. UNMAP
• D. Auto Reclaim

Answer: C

Explanation:
VAAI UNMAP was introduced in vSphere 5.0 to allow the ESXi host to inform the backing storage that files or VMs had be moved or deleted from a Thin Provisioned VMFS datastore. This allowed the backing storage to reclaim the freed blocks. There was no way of doing this previously, resulting in many customers with a considerable amount of stranded space on their Thin Provisioned VMFS datastores.

NEW QUESTION 13

In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)

• A. DPM
• B. Promiscuous mode
• C. LLDP
• D. CDP

Answer: CD

NEW QUESTION 14

What is the default space threshold for vSphere Storage DRS?

• A. 90%
• B. 70%
• C. 95%
• D. 80%

Answer: D

Explanation:
https://kb.vmware.com/s/article/2149938
Load balancing based on Space and IO: Storage DRS dynamically balance the Storage DRS cluster imbalance based on Space and IO threshold set. Default space threshold per datastore is 80% and default IO latency threshold is 15ms.

NEW QUESTION 15

When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?

• A. After the expired backup image is restored.
• B. During the next backup window following expiry.
• C. During the next maintenance window following expiry.
• D. Immediately after the retention period has expired.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-vSphere/6.0/vmware-data-protection-administration-guide-60.pdf ‘During maintenance periods, VDP examines the backups in the appliance and evaluates whether the
backupretention period has expired. If ithas expired, VDP removes the expired backup from the appliance.’

NEW QUESTION 16

What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode? (Choose two.)

• A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
• B. Rules prevent Storage DRS from making migration recommendations.
• C. Storage DRS is disabled on the virtual disk.
• D. Storage DRS is configured for a VMFS3 datastore.

Answer: BC

Explanation:
Problem
A datastore in a datastore cluster cannot either maintenance mode. The Entering Maintenance Mode status remains at 1%.
Cause
One or more disks on the datastore cannot be migrated with Storage vMotion. This condition can occur in the following instances.
Storage DRS is disabled on the disk
Storage DRS rules prevent Storage DRS from making migration recommendations for the disk.

NEW QUESTION 17

A security officer has issued a new directive that users will no longer have access to change connected network adapters to limit denial of service on a virtual machine.
Which two correct virtual machine advanced configuration parameters will accomplish this7 (Choose two.)

• A. isolation.device.connectable.disable = "TRUE"
• B. isolation.de.ice.edit.disable - "FALSE"
• C. isolation.device.connectable.disable = "FALSE"
• D. isolation.device.edit.disable = “TRUE”

Answer: AD

Explanation:
Prevent a Virtual Machine User or Process from Disconnecting Devices in the vSphere Web ClientUsers and processes without root or administrator privileges within virtual machines have the capability to connect or disconnect devices, such as network adaptors and CD-ROM drives, as well as the ability to modify device settings. To increase virtual machine security, remove these devices. If you do not want to permanently remove a device, you can prevent a virtual machine user or process from connecting or disconnecting the device from within the guest operating system.
Valueisolation.device.connectable.disabletrue isolation.device.edit.disabletrue

NEW QUESTION 18

When using DPM in a vSphere HA cluster with Admission Control enabled, which two statements are true? (Choose two.)

• A. DPM cannot be enabled on a cluster with HA Admission control enabled.
• B. If necessary, DPM powers on hosts from standby mode to maintain failover needs.
• C. EVC must be enabled on the cluster before DPM can be enabled.
• D. DPM and HA do not interact with each othe
• E. There will be no change in behavior when DPM is enabled on a cluster using HA.
• F. DPM does not place hosts in standby mode if doing so would violate failover requirements.

Answer: BE

NEW QUESTION 19

Which two datastore types are supported by Storage I/O Control v2? (Choose two.)

• A. vSAN
• B. RDM
• C. NFS
• D. Virtual Volumes
• E. VMFS

Answer: CE

NEW QUESTION 20

Which method is supported for backing up the virtual machine that contains vCenter Server?

• A. incremental
• B. individual disks
• C. differential
• D. full image

Answer: D

NEW QUESTION 21

vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?

• A. DRS will balance VMs when a network resource pool is configured for VMs.
• B. DRS will balance VMs when Network I/O Control is enabled.
• C. DRS will place VMs on initial boot for hosts that have network utilization lower than the threshold.
• D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.

Answer: A

NEW QUESTION 22

An administrator is attempting to enable Fault Tolerance on a virtual machine but the operation does not complete successfully.
Which could be two reasons for this? (Choose two.)

• A. The virtual machine has more than 1 vCPU.
• B. The virtual machine has uncommitted snapshots.
• C. vSphere HA is disabled for this virtual machine.
• D. The virtual machine is located on vSAN storage.
• E. The virtual machine has over 32GB of memory assigned.

Answer: BC

Explanation:
A number of validation checks are performed on a virtual machine before Fault Tolerance can be turned on.

NEW QUESTION 23

Which three TCP/IP stacks are built in at the VMkernel level in vSphere 6 x? (Choose three.)

• A. Fault Tolerance
• B. vMotion
• C. Provisioning
• D. Management
• E. Default

Answer: BCE

NEW QUESTION 24

An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?

• A. vSphere standard switch port
• B. ERSPAN
• C. NSX Virtual Wire
• D. VLAN

Answer: B

Explanation:
Support for ERSPAN
ERSPAN mirrors traffic on one or more “source” ports and delivers the mirrored traffic to one or more “destination” ports on another switch. vSphere 6.5 includes support for the ERSPAN protocol.

NEW QUESTION 25

An administrator wants to enable VMware Fault Tolerance on a virtual machine. Which two vSphere features are supported with Fault Tolerance? (Choose two.)

• A. VM Component Protection
• B. vSphere HA
• C. Storage DRS
• D. Snapshots

Answer: BC

NEW QUESTION 26
......