NEW QUESTION 1

A company has requested that a plan for Auto Deploy be built using VMware-recommended best practices for networking.
Which two considerations adhere to VMware-recommended networking best practices for Auto Deploy? (Choose two.)

• A. Using IPv4 as Auto Deploy will be able to boot hosts with a legacy BIOS.
• B. Using DHCP reservations for address allocations because providing fixed IP addresses through host customization is not supported.
• C. Using VLANs on the management network as it offers increased performance while hosts are booting.
• D. Using IPv6 as Auto Deploy will be able to boot hosts with a legacy BIOS and UEFI.
• E. Using DHCP reservations for address allocations because providing fixed IP addresses through host customization is not recommended.

Answer: AE

Explanation:
PXE booting with legacy BIOS firmware is possible only over IPv4. PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
Use DHCP reservations for address allocation. Fixed IP addresses are supported by the host customization
mechanism, but providing input for each host is not recommended

NEW QUESTION 2

Which guest operating system supports PVRDMA?

• A. Linux (32-Bit)
• B. Linux (64-Bit)
• C. Windows (64-Bit)
• D. Windows (32-Bit)

Answer: B

Explanation:
The guest operating system that supports PVRDMA is Linux 64 bit. Guest OS Linux (64-bit)

NEW QUESTION 3

An administrator is upgrading their external Platform Services Controllers and vCenter Server Appliance, and also migrating vSphere Update Manager version 6.0 to version 6.5.
Which is the correct order to upgrade these components?

• A. - Upgrade the external Platform Services Controller- Run the Migration Assistant on the vSphere Update Manager- Upgrade the vCenter Server Appliance
• B. - Upgrade the external Platform Services Controller- Upgrade the vCenter Server Appliance- Run the Migration Assistant on the vSphere Update Manager
• C. - Upgrade the external Platform Services Controller- Upgrade the vSphere Update Manager- Upgrade the vCenter Server Appliance
• D. - Upgrade the vCenter Server Appliance- Run the Migration Assistant on the vSphere Update Manager- Upgrade the external Platform Services Controller

Answer: A

NEW QUESTION 4

What are three parameters for traffic filtering or marking? (Choose three.)

• A. Protocol
• B. DSCP value
• C. Traffic Direction
• D. virtual Port ID

Answer: ABC

NEW QUESTION 5

What two migration paths are supported for Windows vCenter Servers? (Choose two.)

• A. vCenter Server 5.5 with an embedded vCenter Single Sign-On instance on Windows > vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance.
• B. vCenter Server 6.0 instance on Windows >vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance
• C. vCenter Server 6.0 instance on Windows >vCenter Server Appliance 6.5 with an external Platform Services Controller appliance
• D. vCenter Server 5.5 instance on Windows >vCenter Server Appliance 6.5 with an embedded Platform Services Controller appliance

Answer: AB

NEW QUESTION 6

Storage capabilities be populated in what two ways? (Choose two.)

• A. Datastores can advertise their capabilities through VASA.
• B. Datastores can advertise their capabilities through VAAI.
• C. The administrator can use tags to describe capabilities.
• D. Default capabilities are provided by vCenter Server.

Answer: AC

NEW QUESTION 7

A user is given the “Virtual machine user (sample)” role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)

• A. Reset a virtual machine.
• B. Power on a virtual machine.
• C. Move a host into a cluster.
• D. Configure CD media.
• E. Migrate a virtual machine with Storage vMotion.

Answer: ABD

Explanation:
With virtual machine user sample role, you can reset a virtual machine, power on a VM, and configure CD media. All other roles are for the administrator to perform.

NEW QUESTION 8

The vSphere HA agent has been in the "Agent Unreachable" state on a single slave ESXi host for over a minute. The master and slave ESXi hosts are connected to the vCenter Server Appliance.
Which should be the first step for validation the network configuration?

• A. Log into the affected slave ESXi host via console or SSH and attempt to ping the master ESXi host over the vSphere HA network.
• B. Log into the master ESXi host via console or SSH and attempt to ping the vCenter Server Appliance over the vSphere HA network.
• C. Log into the affected slave ESXi host via console or SSH and attempt to ping the vCenter Server Appliance over the Fault Tolerance network.
• D. Log into the vCenter Server Appliance via console or SSH and attempt to ping the affected slave ESXi host.

Answer: D

NEW QUESTION 9

Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?

• A. 1024
• B. 512
• C. 2048
• D. 256

Answer: B

NEW QUESTION 10

What availability mode does vCenter HA provide?

• A. Active-Standby
• B. Load-balanced
• C. Active-Passive
• D. Active-Active

Answer: C

NEW QUESTION 11

During Fibre Channel adapter setup of a ESXi host, which configuration guideline should be considered?

• A. Do not mix Fibre Channel adapter models to access the same LUN from a single host unless the default queue depth has been changed.
• B. Do not mix Fibre Channel adapters from different vendors in a single host.
• C. Use Fibre Channel adapters from different vendors in a single host.
• D. Set the queue depth to 16 if using a mix of different vendors’ Fibre Channel adapters in all hosts in the cluster.

Answer: B

Explanation:
Do not mix FC HBAs from different vendors in a single host. Having different models of the same HBA is supported, but a single LUN cannot be accessed through two different HBA types, only through the same type.

NEW QUESTION 12

A VM folder contains VM1 and VM2.
• Group A has permission to power on virtual machines, defined on the VM folder and its children.
• Group B has permission to power off virtual machines, defined on the VM folder and its children.
If a user is a member of Groups A and B, what will be the user's effective permission on VM1 and VM2?

• A. Power on.
• B. Power off.
• C. Power on and Power off.
• D. Reset.

Answer: C

NEW QUESTION 13

Which iSCSI initiator type can be used with any network interface card?

• A. Software iSCSI initiator
• B. Software FCoE adapter
• C. Hardware Independent iSCSI initiator
• D. Hardware Dependent iSCSI initiator

Answer: A

Explanation:
A software iSCSI adapter is a VMware code built into the VMkernel. It allows your host to connect to the iSCSI storage device through standard network adapters. The software iSCSI adapter handles iSCSI processing while communicating with the network adapter. With the software iSCSI adapter, you can use iSCSI technology without purchasing specialized hardware.

NEW QUESTION 14

For Virtual Machine Compatibility upgrade, a VM needs to be in which power state?

• A. Maintenance mode
• B. Suspended
• C. Powered Off
• D. Powered On

Answer: C

NEW QUESTION 15

Which are the two storage options for a Content Library when using the VMware vCenter Appliance? (Choose two.)

• A. FTP
• B. NFS
• C. CIFS
• D. VMFS

Answer: BD

Explanation:
When you create a local library, you can store its contents on a datastore managed by the vCenter Server instance or on a remote file system.
Depending on the type of storage that you have, you can use Virtual Machine File System (VMFS) or Network File System (NFS) for storing content on a datastore.

NEW QUESTION 16


Examine the LUN properties that are shown in the exhibit. Which action should be taken to utilize all active paths?

• A. Change PSP to Most Recently Used
• B. No action require
• C. All paths are already utilized.
• D. Change PSP to Fixed.
• E. Change PSP to Round Robin.

Answer: D

Explanation:
The host uses an automatic path selection algorithm rotating through all active paths when connecting to active-passive arrays, or through all available paths when connecting to active-active arrays. RR is the default for a number of arrays and can be used with both active-active and active-passive arrays to implement load balancing across paths for different LUNs.

NEW QUESTION 17

On which level is the virtual machine system traffic reservation defined in Network I/O Control version 3?

• A. Uplink
• B. Distributed switch
• C. Distributed portgroup
• D. Host

Answer: B

NEW QUESTION 18

A working virtual machine (VM) is migrated to a new Port Group from an existing Port Group on the same switch. The VM loses network connectivity when the migration is completed.
Which could be a reason for the lack of connectivity for the VM?

• A. The new Port Group is not configured with the same VLAN ID as the existing Port Group.
• B. The Virtual Machine must be rebooted before the settings take effect.
• C. The new Port Group is not configured with the same name as the existing Port Group.
• D. The ESXi host must be rebooted before the settings take effect.

Answer: A

Explanation:
In order to migrate a new port group from an existing one on the same switch, you need to configure the same VLAN ID as the existing port group.

NEW QUESTION 19

Which two encryption keys does the host use when encrypting virtual machine files? (Choose two.)

• A. Public Key Infrastructure Encryption Key (PKI)
• B. Master Encryption Key (MEK)
• C. Data Encryption Key (DEK)
• D. Key Encryption Key (KEK)

Answer: CD

NEW QUESTION 20

Which two statements are true for Predictive DRS? (Choose two.)

• A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
• B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
• C. It balances resource utilization based on a threshold’s algorithm that runs each night.
• D. It determines the best placement and balance of virtual machines based on a threshold’s algorithm that runs each night in vCenter Server 6.5 Database.

Answer: BC

Explanation:
Predictive DRS
Predictive DRS is a new feature that leverages the predictive analytics of vRealize Operations Manager with the powerful resource scheduler algorithm of vSphere DRS. Together, these two products enable workload balancing for certain VMs before resource utilization spikes occur, potentially eliminating a great amount of resource contention that might have occurred in the past. vRealize Operations Manager runs its dynamic thresholds algorithm nightly against the VMs on which it collects data. These dynamic thresholds create forecasted metrics for the future utilization of the VMs. The metrics are then passed to vSphere DRS to determine the best placement and balance of VMs before resource utilization spikes occur. Predictive DRS helps prevent resource contention on hosts that run VMs with predictable utilization patterns.

NEW QUESTION 21

Which two storage technologies are supported for MSCS? (Choose two.)

• A. VAAI
• B. NFS
• C. iSCSI
• D. FC

Answer: CD

Explanation:
https://kb.vmware.com/s/article/2147661?other.KM_Utility.getArticleLanguage=1&r=1&other.KM_Utility.getA

NEW QUESTION 22

Which two tasks should a vSphere administrator perform if the vmJc«rn«l log reports VMFS metadata errors? (Choose two.)

• A. reformat the datastore
• B. ignore the messages
• C. contact VMware technical support
• D. check the device with VOMA

Answer: CD

Explanation:
https://docs.vmware.com/en/VMware-vSphere/6.0/com.vmware.vsphere.troubleshooting.doc/GUID-6F991DB5 VOMA = vSphere On-disk Metadata Analyser (dentify and fix incidents of metadata corruption that affect file
systems or underlying logical volumes)
ProblemYou might need to check metadata consistency of a file system or a logical volume backing the file system when you experience problems with various functionalities on a VMFS datastore or a virtual flash resource. For example you might want to perform a metadata check if one of the following occurs:
You experience storage outages.
After you rebuild RAID or perform a disk replacement. You see metadata errors in the vmkernel.log file.
You are unable to access files on a VMFS.
You see corruption being reported for a datastore in events tabs of vCenter Server.
ResultsTo check metadata consistency, run VOMA from the CLI of an ESXi host. VOMA can be used to check and fix metadata inconsistency issues for a VMFS datastore or a virtual flash resource. To resolve errors reported by VOMA, consult VMware Support.

NEW QUESTION 23

An administrator is trying to set up Host Partial Failure Response, but the Automated option is grayed out. What can the administrator change to enable the Automated option?

• A. Change the vSphere DRSAutomation level to Partially Automated.
• B. Change the vSphere DRS Automation level to Fully Automated.
• C. Enable vSphere HA Host Monitoring.
• D. Change the vSphere DPM Automation level to Automatic.

Answer: C

NEW QUESTION 24

Which is the minimum number of hosts required for a VMware vSAN cluster to be able to apply a vSAN RAID5 storage policy?

• A. six hosts
• B. three hosts
• C. four hosts
• D. five hosts

Answer: C

NEW QUESTION 25

What two VMware Remote Console Options can be defined in the virtual machine settings? (Choose two.)

• A. Boot Delay
• B. Maximum number of sessions
• C. Total video memory
• D. Guest OS lock

Answer: AD

Explanation:
https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.vm_admin.doc%2FGUID-389

NEW QUESTION 26
......