NEW QUESTION 1

Which statement regarding network management for the data center is true?

• A. Flexible NetFlow can be used to provide enhanced network anomaly and security detection.
• B. The Network Analysis Module is best deployed in the core for highest visibility.
• C. NetFlow Support is available on most IOS and Nexus products, excluding the Nexus 1000v
• D. NetFlow Data Export is best positioned on the Nexus 5500 at the access or aggregation layer.

Answer: A

NEW QUESTION 2

Which technology can you use to create separate routing tables for different tenants that are hosted on the same Cisco NX-OS platform?

• A. Cisco FabricPath
• B. VLANs
• C. vPC
• D. VRF

Answer: D

Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/vxlan/configuration/guide/b_NX-OS_VXL

NEW QUESTION 3

You need to ensure that VXLAN connectivity can survive a chassis failure in a vPC configuration using Cisco Nexus 9300 Series switches. Which address type should be bound to the VLAN NVE tunnel for VTEP to ensure resiliency?

• A. anycast
• B. unicast
• C. multicast
• D. broadcast

Answer: A

NEW QUESTION 4

You have a Cisco UCS B-Series chassis. To connect to a blade server by using a remote KVM console, you should connect to the IP address of which component?

• A. mgmt0
• B. CIMC
• C. IPMI
• D. CMP

Answer: B

NEW QUESTION 5

Which description of an edge-core-edge SAN topology is true?

• A. Core switches connect to servers.
• B. Edge switches connect to storage devices and servers
• C. Core switches connect to storage devices and servers.
• D. Edge switches connect to each other via ISLs.

Answer: D

NEW QUESTION 6

Which components share a physical interface in a VDC deployment?

• A. two VDCs for Ethernet traffic
• B. storage VDC for FCoE traffic and a VDC for Ethernet traffic
• C. two storage VDCs for FCoE traffic
• D. interface VLAN and a VDC

Answer: B

NEW QUESTION 7

Which option can be used to provide a nonproprietary method of load balancing and redundancy between the access and aggregation layers in the data canter?

• A. vPC
• B. PAgP
• C. LACP
• D. host vPC

Answer: C

NEW QUESTION 8

The classical aggregation layer design does not provide isolation on the control plane and on the data plane. What is the solution to this problem?

• A. STP
• B. VDC
• C. Cisco ISO ISSU
• D. HSRP

Answer: B

NEW QUESTION 9

How is oversubscription between disk arrays and hosts calculated when you use only line-rate capable line cards?

• A. by dividing the total bandwidth of the disk array ports by the total bandwidth of the Inter-Switch Links
• B. dividing the total bandwidth of the host ports by the total bandwidth of the disk array ports
• C. by dividing the total bandwidth of the host ports by the total bandwidth of the Inter-Switch Links
• D. by dividing the total bandwidth of the disk array ports by the total bandwidth of the host ports

Answer: B

NEW QUESTION 10

You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

• A. VTEP
• B. the site identifier
• C. a map resolver
• D. a map server
• E. VNI

Answer: CD

Explanation:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book/irl-cfg-lisp.ht

NEW QUESTION 11

Which two options are supported on Cisco UCS Fabric Interconnects that use native Fibre Channel connectivity? (Choose two)

• A. iSCSI
• B. NFS
• C. DAS
• D. SAN
• E. iFCP

Answer: CD

NEW QUESTION 12

Which three statements accurately describe end host mode on cisco UCS Fabric interconnect? (choose Three)

• A. The Fabric interconnect must be rebooted to enable end host mode
• B. Network to server unicast traffic is forward to the server only if the traffic arrived on pinned up link mode
• C. RPF and Deja -Vue checks apply to multicast traffic
• D. The uplink port are placed in rapid PVST+ edge trunk state
• E. Mac address learning occurs only on the server ports
• F. The vtp is enabled on fabric interconnect

Answer: ABE

NEW QUESTION 13

Which two options are advantages of the core-edge SAN topology as compared to the collapsed-core SAM topology? (Choose two.)

• A. predictable performance
• B. minimized ISL usage
• C. easier to analyze and tune performance
• D. single management interface
• E. higher scalability

Answer: AE

Explanation:
https://supportforums.cisco.com/document/125836/core-edge-and-collapse-core-san-topologies#Core-Edge_Top

NEW QUESTION 14

Which technology uses TCP as a block I/O transport?

• A. iSCSI
• B. NFS v4
• C. CIFS
• D. FCoE

Answer: A

NEW QUESTION 15

Which two options can be performed only from the Admin VDCs on the Cisco Nexus 7000 Series platform? (Choose two)

• A. Create SPAN ports on other VDCs
• B. Create, modify, and delete VDCs
• C. Configure Cisco Fabric Path in other VDCs
• D. Access the CLI of other VDCs
• E. Process-data plane traffic

Answer: BD

NEW QUESTION 16

What are two benefits of a service insertion that is mediated through the Cisco APIC instead of the classical Ethernet model? (Choose two.)

• A. provides Layer 5 service insertion capability
• B. provides Layer 7 service insertion capability
• C. provides policies that can manage the network and service appliances
• D. can automate the service insertion
• E. provides built-in services, such as Cisco ACE Web Application Firewall and ADC

Answer: BC

NEW QUESTION 17

Designing data center interconnects requires the understanding of the loop avoidance mechanisms. Drag and drop the loop avoidance mechanisms from the left onto the technologies that utilize them on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18

What is used to insert services when using Layer 4 to Layer 7 service insertion in the Cisco ACI?

• A. device scripts
• B. tenant administrators
• C. policies
• D. function profiles

Answer: D

NEW QUESTION 19

Which two actions must be performed when you configure Cisco VN-Link in hardware? (Choose two.)

• A. Create a distributed virtual switch in Cisco UCS Manager.
• B. Add an ESX host to the distributed virtual switch in Cisco UCS Manager.
• C. Create a port profile and profile clients in Cisco UCS Manager.
• D. Create a standard switch on an ESXi host and map the network adapters to the switch.
• E. Create a distributed virtual switch under the datacenter folder in VMware vCenter.

Answer: AC

NEW QUESTION 20

Which two FEX topologies trade deterministic bandwidth for server-link stability during FEX uplink failure? (Choose two.)

• A. port channel
• B. static pinning
• C. virtual port channel
• D. dynamic pinning
• E. Equal-Cost Multipath
• F. RPVST

Answer: AC

NEW QUESTION 21

Drag and drop the feature descriptions from the left onto the correct types of VDCs on the right

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 22

You must configure resiliency for Fiber Channel uplink ports on Cisco UCS Fabric Interconnects. Which feature should you configure?

• A. A port channels
• B. An appliance ports
• C. vPC
• D. a unified storage ports

Answer: A

NEW QUESTION 23

You are designing a fabric interconnect solution operating in END host MODE and connected to the upstream Cisco nexus 7000 series Switches for LAN and SAN traffic.
Which statement about the setup is true?

• A. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to FDISCs
• B. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated to Flogls
• C. All PLOGLS from the nodes that are connected to the end host fabric interconnect switch must be translated toPLOGls
• D. FDISCs

Answer: B

NEW QUESTION 24

You plan to use vPC+ in a FabricPath topology. What are two characteristics of a vPC+ switch ID? (Choose two.)

• A. must he set to 255
• B. must be set manually
• C. can be reused in the FabricPath topology
• D. must be the same on each vPC+ peer
• E. must be different on each vPC+ peer

Answer: CD

NEW QUESTION 25
......