Q1. The customer has deployed C7960 phones with clients connected to them. What switch feature could be enabled to distinguish IP voice traffic from client data traffic? 

A. VoiceVLAN 

B. QoS routing 

C. WME 

D. Weighted Queuing 

E. QBSS 

View Answer

Q2. An engineer wants to configure Call Admission Control and ensure that AC is based on the capacity of the AP and considering the possible impact of other APs in the area. Which two configuration options are required? (Choose two.) 

A. StaticCAC 

B. Admission Control 

C. Load-Based AC 

D. Add Traffic Stream 

E. Reserved Roaming Bandwidth 

F. Expedited Bandwidth 

View Answer

Q3. What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller? 

A. 30Seconds 

B. 15 Seconds 

C. 10 Seconds 

D. 60 Seconds 

View Answer

Q4. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

View Answer

Q5. Which statement about when you configure FlexConnect APs and you want to set up Cisco Centralized Key Management fast roaming is true? 

A. FlexConnect groups are required for Cisco Centralized Key Management fast roaming to work with FlexConnect access points. 

B. APs that are in the same FlexConnect group but associated to different WLCs support Cisco Centralized Key Management. 

C. Cisco Centralized Key Management fast roaming among FlexConnect and non-FlexConnect access points is supported. 

D. The FlexConnect access point must be in standalone mode to support Cisco Centralized Key Management. 

View Answer

Q6. You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC? 

A. central switching with PMK (OKC) between different FlexConnect groups 

B. local switching with Cisco Centralized Key Management within the same FlexConnect group 

C. central switching with Cisco Centralized Key Management between different FlexConnect groups 

D. local switching with PMKID within the same FlexConnect group 

View Answer

Q7. A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery? 

A. Use a console cable. 

B. Contact Cisco TAC and arrange an RMA of the MSE. 

C. Boot the MSE using the software installation DVD. 

D. The Password can be reset using Prime Infrastructure. 

View Answer

Q8. You have just added a new MSE to Prime Infrastructure and want to synchronize the MSE with your 5508 WLC. which is located behind a firewall in a DMZ. You notice that NMSP messages are failing between the two devices. What traffic needs to be allowed on the Firewall to ensure the MSE and WLC can communicate using NMSP? 

A. UDP 16113 

B. TCP 1613 

C. TCP 16113 

D. UDP 1613 

View Answer

Q9. Refer to Exhibit. 

A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs: 

Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13) 

Which three behaviors will the client experience? (Choose three.) 

A. While the AP is in standalone mode, the client will be placed in VLAN 15. 

B. While the AP is in standalone mode, the client will be placed in VLAN 10. 

C. When the AP transitions to connected mode, the client will be de-authenticated. 

D. While the AP is in standalone mode, the client will be placed in VLAN 13. 

E. When the AP is in connected mode, the client will be placed in VLAN 13. 

F. When the AP transitions to connected mode the client will remain associated. 

G. When the AP is in connected mode, the client will be placed in VLAN 15. 

H. When the AP is in connected mode, the client will be placed in VLAN 10. 

View Answer

Q10. An engineer would like to capture NetFlowdata on PI. Which resource is required to allow this? 

A. Cisco MSE as NetFlow exporter 

B. Prime Infrastructure 1.0 or later 

C. Cisco NAC as NetFlow exporter 

D. Cisco ISE as NetFlow exporter 

View Answer