[2021-New] Microsoft 70-410 Dumps With Update Exam Questions (221-230)

70-410 Dumps

70-410 Exam Questions - Online Test

70-410 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Q1. HOTSPOT - (Topic 3)

Your network contains an Active Directory domain named contoso.com. The network contains two subnets. The subnets are configured as shown in the following table.

The network contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role installed. Server1 is configured to lease IP addresses to the two subnets.

You add three new printers to the MainOffice subnet. The printers have static IP addresses. The IP addresses are consecutive.

You need to create an exclusion range that contains the IP addresses of the printers.

From which node should you configure the exclusion range? To answer, select the appropriate node in the answer area.

Answer:

Q2. - (Topic 3)

You have a server named Server1 that runs Windows Server 2012 R2.

You plan to create an image of Server1.

You need to remove the source files for all server roles that are not installed on Server1.

Which tool should you use?

A. servermanagercmd.exe

B. imagex.exe

C. ocsetup.exe

D. dism.exe

Answer: D

Explanation:

servermanagercmd.exe – The ServerManagerCmd.exe command-line tool has been deprecated in Windows Server 2008 R2. imagex.exe – ImageX is a command-line tool in Windows Vista that you can use to create and manage Windows image (.wim) files. A .wim file contains one or more volume images, disk volumes that contain images of an installed Windows operating system. dism.exe – Deployment Image Servicing and Management (DISM.exe) is a command-line tool that can be used to service a Windows image or to prepare a Windows Preinstallation Environment (Windows PE) image. It replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg that were included in Windows Vista. The functionality that was included in these tools is now consolidated in one tool(DISM.exe), and new functionality has been added to improve the experience for offline servicing. DISM can Add, remove, and enumerate packages. ocsetup.exe – The Ocsetup.exe tool is used as a wrapper for Package Manager (Pkgmgr.exe) and for Windows Installer (Msiexec.exe). Ocsetup.exe is a command-line utility that can be used to perform scripted installs and scripted uninstalls of Windows optional components. The Ocsetup.exe tool replaces the Sysocmgr.exe tool that Windows XP and Windows Server 2003i use.

The Dism utility can be used to create and mount an image of Server1.

References:

http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx

Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44 Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p. 19-22

Q3. - (Topic 2)

You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2.

Corel has the Hyper-V server role installed. Corel has two network adapters from different third-party hardware vendors.

You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.

What should you use?

A. New-NetSwitchTeam

B. Install-Feature

C. Add-NetSwitchTeamMember

D. Netsh.exe

Answer: A

Q4. - (Topic 3)

Catalog Servers. Your domain structure contains one root domain and one child domain. You modify the folder permissions on a file server that is in the child domain. You discover that some Access Control entries start with S-1-5-21 and that no account name is listed.

You need to list the account names. What should you do?

A. Move the RID master role in the child domain to a domain controller that holds the Global Catalog.

B. Modify the schema to enable replication of the friendly names attribute to the Global Catalog.

C. Move the RID master role in the child domain to a domain controller that does not hold the Global Catalog.

D. Move the infrastructure master role in the child domain to a domain controller that does not hold the Global Catalog.

Answer: D

Explanation:

If the IM Flexible Single Master Operation (FSMO) role holder is also a global catalog server, the phantom indexes are never created or updated on that domain controller. (The FSMO is also known as the operations master.) This behavior occurs because a global catalog server contains a partial replica of every object in Active Directory. The IM does not store phantom versions of the foreign objects because it already has a partial replica of the object in the local global catalog.

For this process to work correctly in a multidomain environment, the infrastructure FSMO role holder cannot be a global catalog server. Be aware that the first domain in the forest holds all five FSMO roles and is also a global catalog. Therefore, you must transfer either role to another computer as soon as another domain controller is installed in the domain if you plan to have multiple domains.

Q5. HOTSPOT - (Topic 2)

Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named

Server1.

You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named

Server2 that runs Windows Server 2012 R2.

You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1.

Which server role should you install on Server2?

To answer, select the appropriate role in the answer area.

Answer:

Q6. - (Topic 3)

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain have Windows Server 2012 R2 installed, while domain controllers have Windows Server 2008 R2 installed.

You are then tasked with deploying a new Windows Server 2012 R2 domain controller. You are preparing to install the DNS Server role, and enable the global catalog server option.

Which of the following actions should you take?

A. You should consider making use of Server Manager.

B. You should consider making use of the Active Directory Installation Wizard.

C. You should consider making use of the DHCP Installation Wizard

D. You should consider making use of TS Manager

Answer: A

Q7. - (Topic 3)

Your network contains an Active Directory domain named contoso.com.

The domain contains 20 computer accounts in an organizational unit (OU) named OU1. A user account named User1 is in an OU named OU2.

You are configuring a Group Policy object (GPO) named GPO1.

You need to assign User1 the Backup files and directories user right to all of the computer accounts in OU1.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From User Configuration in GPO1, modify the security settings.

B. Link GPO1 to OU1.

C. From Computer Configuration in GPO1, modify the security settings.

D. Modify the Delegation settings of GPO1.

E. Link GPO1 to OU2.

Answer: B,C

Q8. - (Topic 3)

You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise.

Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1.

For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system. You install the drivers for the wireless network adapter.

You need to ensure that you can connect to Network1 from Windows Server 2012 R2.

What should you do?

A. Restart the WLAN AutoConfig service.

B. From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.

C. From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.

D. From Server Manager, install the Wireless LAN Service feature.

Answer: D

Explanation:

The Wireless LAN service is a feature in Windows Server. 2012 R2 that you can use to enable the wireless WLAN AutoConfig service, and to configure the WLAN AutoConfig service for automatic startup. Once enabled, the WLAN AutoConfig service dynamically selects which wireless network the computer automatically connects to, and configures the necessary settings on the wireless network adapter. This includes automatically selecting and connecting to a more preferred wireless network when one becomes available. To enable the Wireless LAN Service In Server Manager Dashboard, click Manage, and then click Add Roles and Features. The Add Roles and Features Wizard opens. Click Next. In Select installation type, select Role-based or feature-based installation, and then click Next. In Select destination server, enable Select a server from the server pool, and in Server Pool, select the server for which you want to enable the Wireless LAN Service, and then click Next. In Select server roles, click Next. In Select Server features, in Features, select Wireless LAN Service, and then click Next.

: http://technet.microsoft.com/en-us/library/hh994698.aspx

Q9. - (Topic 1)

Your network contains an Active Directory domain named contoso.com. The domain

contains a server named Server1. Server1 runs Windows Server 2012 R2.

You need to create a 3-TB virtual hard disk (VHD) on Server1.

Which tool should you use?

A. New-StoragePool

B. Diskpart

C. File Server Resource Manager (FSRM)

D. New-StorageSubsytemVirtualDisk

Answer: B

Explanation:

You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000

Q10. - (Topic 2)

You have a server named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the

installation fails repeatedly.

You need to ensure that the feature can be installed on Server1.

What should you do?

A. Run the Add-AppxProvisionedPackage cmdlet.

B. Disable User Account Control (UAC).

C. Connect Server1 to the Internet.

D. Remove the .NET Framework 4.5 Features feature.

Answer: C