NEW QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to add scripting support to Windows PE. What should you do first?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-addingpowershell- support-to-windows-pe

NEW QUESTION 2
You have an image of Windows 10.
You plan to deploy the image to a new computer.
You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image. You deploy the image to the computer.
You add an application and a driver to the online image. You need to prepare the computer for the end user. Which command should you run?

• A. sysprep.exe /oobe
• B. sysprep.exe /generalize /audit
• C. dism.exe /Apply-Image
• D. imagex.exe /capture

Answer: A

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windows-toaudit- mode-or-oobe

NEW QUESTION 3
You have a WIM file in a shared folder. The WTM file contains an image of Windows 10 and is 10 GB. You have Windows Pre installation Environment (Windows Pt) installed on a bootable USB drive that uses the FAT32 file system.
You plan to use the USB drive to deploy the Windows 10 image to a computer that starts in UEFI mode.
You need to copy the image to the USB disk. Which command should you run first?

• A. dism.exe with the /Split Image parameter
• B. dism.exe with the /Append Image parameter
• C. dism.exe with the /Export Image parameter
• D. dism.exe with the /Cleanup-Image parameter

Answer: A

NEW QUESTION 4
You plan to create an image of Windows 10 that contains a push-button reset solution. The solution will have custom settings for each edition of Windows 10.
You need to prepare the push-button reset solution. What should you include in the solution?

• A. an unattended file and a bare metal recovery configuration
• B. an unattended file and extensibility scripts
• C. extensibility scripts and system restore points
• D. a bare metal recovery configuration and Scanstate packages

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-a-script-to-pushbutton- reset-features

NEW QUESTION 5
HOTSPOT
You are building a Windows Pre installation Environment (Windows PE) image. You need to perform the following actions:
• Disable the firewall by using an unattended answer file.
• Add a custom shell application.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: Disable the firewall by using an unattended answer file = Run Wpeinit.exe
Add a custom shell application = Winpeshl.ini file https://technet.microsoft.com/en-us/windows/dn938390(v=vs.60)

NEW QUESTION 6
You have a reference image of the 64-bit version of Windows 10. The reference image contains an application named App1.
You need to ensure that App1 is pinned to the Start menu.
Which tool or tools should you use to apply the custom Start layout to the image?

• A. image.exe and Windows Preinstallation Environment (Windows PE)
• B. dism.exe and File Explorer
• C. Microsoft Application Compatibility Toolkit (ACT)
• D. Windows System Image Manager (Windows SIM)

Answer: D

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-the-startscreen

NEW QUESTION 7
DRAG DROP
You have an image of Windows 10 for a new model of computers.
You seal the image, copy the image to an external hard disk, and then connect the disk to a computer.
You need to deploy the image to the computer. Which three actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders. Some of the update packages contain dependencies to the other update packages. You are unaware of the specific dependencies. You need to add all the update packages to the image in the correct order.
Solution: You run dism.exe/Add-Package once and specify the /PackagePath parameter for each folder that contains the updates.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 9
HOTSPOT
You are building a Windows Preinstallation Environment (Windows PE) image on a computer named Computer1.
You have an executable file named App1.exe in the C:Toolsfolder. App1.exe is a command line tool that can be run in Windows PE.
You run the following commands on Computer1. copype.cmd amd64 C:WinPE
dism.exe/Mount- Image/ImageFile:c:WinPEmediasourcesboot.wim/index:1/MountDir:C:WinPEMount
You need to ensure that you can run App1.exe from Windows PE. App1.exe must be in the root of X: when Windows PE starts.
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-mount-andcustomize

NEW QUESTION 10
You are customizing a Windows Recovery Environment (Windows RE) image. You plan to customize the push-button reset experience by using extensibility scripts. You need to add a file to Windows RF that will execute at an extensibility point. Which extension should the file have?

• A. .Js
• B. .exe
• C. .vbs
• D. .msi

Answer: B

Explanation: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-push-buttonreset- features

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are building a new image of Windows 10 that contains a push-button reset solution. You need to test whether push-button reset works as expected.
Solution: You start the computer from the installation media for Windows 10. You click Troubleshoot, and then you click System Image Recovery.
Does this meet the goal?

• A. Yes
• B. NO

Answer: B

NEW QUESTION 12
You have a Windows Recovery Environment (Windows RE) image. You make changes to applications, languages, and updates in the image. After the changes, the size of the image increases to 500 MB.
You need to modify the deployment script to ensure that the recovery partition has the required amount of free space. The solution must minimize the space of the recovery partition.
To which size should you set the recovery partition?

• A. 550 MB
• B. 820 MB
• C. 1024 MB
• D. 1524 MB

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigptbased- hard-drive-partitions

NEW QUESTION 13
You have a computer named Compuler1. Computer l has a folder named Folded. Folder1. Folder 1 contains the following files:

You create a DISM configuration tile named Config1.ini that contains the following information.

• A. File2.sys
• B. File2.doc
• C. File1.mp3
• D. Data2.zip
• E. Drv2.dll

Answer: A

NEW QUESTION 14
This question requires that you evaluate the underlined text to determine if it is correct.
To provide the default product key for OEM activation, you create an answer file by using Windows System Image Manager (Windows SIM), and you add the Microsoft-Windows-Shell-Setup component and the ProductKey component to the generalize pass.
Review the underlined text. If it makes the statement correct, select “No change is needed.” If the statement is incorrect, select the answer choice that makes the statement correct.

• A. No change is needed.
• B. auditSystem pass
• C. specialize pass
• D. windowsPE pass

Answer: C

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/customize/desktop/unattend/microsoft- windows-shell-setup-productkey

NEW QUESTION 15
HOTSPOT
You have a reference computer that runs Windows 10. The computer contains a provisioning package named Package1.ppkg. Package1.ppkg is located in C:Packages.
You plan to create an image of the reference computer.
You run sysprep.exe on the computer, and then you start the computer by using Windows Preinstallation Environment (Windows PE).
You need to ensure that the image uses the least amount of disk space possible.
How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 16
DRAG DROP
You have an image of Windows l0. The image contains only English (United States) language packs. You need to add Microsoft Windows Client Language-Pack_x64_.fr-fr.cab and Microsoft Windows LanguageFeatures-TextToSpeech-fr-fr-Package.cab to the image.
Which three language packs should you install in sequence? To answer, move the appropriate packs from the list of packs to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 17
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question. Your company has several images of Windows 10.
You need to add me Microsoft .NET 3.5 Framework package to an image of Windows 10 by using Features on Demand
Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Capture-Image
• F. /Cleanup-Image
• G. /Export-Image
• H. /Split-Image

Answer: B

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You mount an image of Windows 10.
You download 10 Windows 10 update packages to separate folders. Some of the update packages contain dependencies to the other update packages. You are unaware of the specific dependencies.
You need to add all the update packages to the image in the correct order.
Solution: You copy all the updates to the same folder. You run dism.exe/Add-Package once and specify the /PackagePath parameter once.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-or-removepackages- offline-using-dism