NEW QUESTION 1
DRAG DROP
You have an offline image of Windows 10.
You receive a new desktop application named App1 that is package as a Windows Installer (MSI) package.
You need to create a provisioning package for App1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 2
You have an image of Windows 10 named Image1.wim. Image1.wim contains a Windows Recovery Environment (Windows RE) image.
You need to add a driver to Windows RE. Which tool or cmdlet should you use?

• A. Express Deployment Tool (EDT) for Windows 10
• B. Add-WindowsDriver
• C. Windows Imaging and Configuration Designer (Windows ICD)
• D. Add-WindowsPackage

Answer: C

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-windows-re

NEW QUESTION 3
You deploy Windows 10 and Microsoft Office 2021 to a test computer.
You plan to capture an image of the test computer, and then to deploy the image to computers that will be sold to your customers.
You need to ensure that when a customer first starts an Office application, the customer is prompted to try, buy, or activate Office.
What should you run on the test computer before the capture?

• A. officedeploymenttool.exe
• B. setup.exe/admin
• C. oemsetup.cmd Mode=OEM
• D. setup.exe/configure

Answer: C

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/prepare-a-snapshot-ofthe- pc-generalize-and-capture-windows-images-blue-sxs

NEW QUESTION 4
You have a computer named Computer1.
You deploy an image of Windows 10 to Computer1. You start Computer1 in audit mode, and then you install several device drivers.
You need to capture an image of Computer1. Which tool should you use?

• A. Windows System Image Manager (Windows SIM)
• B. dism.exe
• C. Express Deployment Tool (EDT) for Windows 10
• D. scanstate.exe

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/prepare-a-snapshot-ofthe- pc-generalize-and-capture-windows-images-blue-sxs

NEW QUESTION 5
You plan to deploy a Windows Preinstallation Environment (Windows PE) image.
Your company uses a graphical application to help installers choose an installation method for Windows 10.
The application must be started by using the following command. installerGui.bat/Full/Interactive
You need to configure Windows PE to run the graphical application during startup. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Create a [boot loader] section in the INI file and add the command.
• B. Create a Boot.ini file in the root folder of the image.
• C. Create a Winpeshl.ini file in the WindowsSystem32 folder of the image.
• D. Create a [LaunchApp] section in the INI file and add the command.
• E. Create a [LaunchApps] section in the INI file and add the comman

Answer: CE

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpeshlini-referencelaunching- an-app-when-winpe-starts

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are preparing an image of Windows 10.
You need to add English, French, and German language packs to the image.
Solution: You mount the image. You run dism.exe and you specify the /Add-Package parameter. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 7
You plan to preinstall Microsoft Office 2021 on several computers that will be sold to your customers. You need to pin Office tiles to the Windows 10 Start menu.
What should you do?

• A. Create a shortcut for each Office applicatio
• B. Copy the shortcuts to C:UsersDefaultAppDataRoamingMicrosoftWwindowsStart Menu.
• C. Create a shortcut for each Office application Copy the shortcuts to CProgram DataMicrosoftWindowsStart Menu.
• D. Create a Layout Modification.xml file in CUsersDefaultApp DataLocalMicrosoft\WindowsShellAdd the Append Office Suite and Append Office Suite Choice tags to the file.
• E. Create a Configuration.xml file in C:UsersDefaultAppDataLocarMicrosoftWindowsShell. Add the Append Office Suite and Append Office Suite Choice tags to the file.

Answer: A

NEW QUESTION 8
You have 500 computers that run the Windows 10 Anniversary Update.
You need to prepare a provisioning package that contains a new universal app and a new Start layout. You run the Windows Assessment and Deployment Kit (Windows ADK) setup for the Windows 10 Anniversary Update.
Which component should you install?

• A. Microsoft Application Virtualization (App-V) Sequencer
• B. Configuration Designer
• C. Deployment Tools
• D. User State Migration Tool (USMT)

Answer: D

NEW QUESTION 9
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question. You attempt to deploy an image of Windows 10 to a new model of computers.
You discover that the deployment fails because of an unsupported mass storage device- You need to ensure mat Windows 10 can be deployed successfully to the new computers. Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Capture-Image
• F. /Cleanup-Image
• G. /Export-Image
• H. /Split-Image

Answer: E

NEW QUESTION 10
HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

Answer:

Explanation: You can use a siloed provisioning package to capture changes made by windows installer. NO You can use a siloed provisioning package to capture the installation of apps from the Windows Store. NO
You can apply a siloed provisioning package to an image by using dism.exe = Yes

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring a reference computer for a new UEFI-based deployment image of the 64-bit version of Windows 10. The reference computer has two physical hard disk drives.
You need to configure a partition on Disk 0 to support a recovery partition.
Solution: You create an EFI system partition of 150 MB that uses the NTFS file system. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigptbased- hard-drive-partitions

NEW QUESTION 12
You create the working directories for a custom Windows Preinstallation Environment (Windows PE) image.
You need to create an ISO image of Windows PE that can be written to a DVD. The ISO image must be bootable.
Which command should you use?

• A. bcdboot.exe
• B. oscdimg.exe
• C. bootsect.exe
• D. etfsboot.exe

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/oscdimg-commandline- options

NEW QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are building a new image of Windows 10 that contains a push-button reset solution. You need to test whether push-button reset works as expected.
Solution: From Windows 10, you open the Settings app, you click Update & security, and then you click Recovery. From Reset this PC, you click Get Started.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: References:
https://support.microsoft.com/en-us/help/12415/windows-10-recovery-options https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/push-button-resetoverview

NEW QUESTION 14
You have a computer named Computer1 that runs Windows 10.
On Computer1, you have a DVD that contains the installation source files of Windows 10 Pro. You open Windows System Image Manager as shown in the exhibit. (Click the Exhibit tab.)

You need to configure the answer file for Windows 10 by using Windows System Image Manager (Windows SIM).
What should you do first?

• A. Copy the installation files for Windows 10 to a hard disk.
• B. Create a catalog file (.clg).
• C. Select a distribution share.
• D. Select an image of Windows 10.

Answer: A

Explanation: References:
https://technet.microsoft.com/en-us/library/cc749317(v=ws.10).aspx

NEW QUESTION 15
DRAG DROP
Match the file formats to the corresponding deployment tools. To answer, drag the appropriate file format from the column on the left to its deployment tool on the right. Each file format may be used once, more than once, or not at all.
NOTE: Each correct match is worth one point.

Answer:

Explanation:

NEW QUESTION 16
DRAG DROP
You need to add drivers to an offline image of Windows 10 by using an answer file.
How should you complete the answer file? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split
bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 17
DRAG DROP
You are building an image of Windows 10 for a new computer model. The computer uses specific out-of-box device drivers.
The Windows 10 image is stored in C:OEMInstall.wim. Install.wim contains only one image named Windows.
The drivers are stored in the C:Mydrivers folder on your management computer. The drivers are stored in the INF format.
You need to add the drivers to a new image in the Install.wim file.
Which three commands should you run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 18
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to modify the regional setting used in Windows PE. What should you do first?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-add-packages-- optional-components-reference