NEW QUESTION 1
What determines which On Demand Routers (ODRs) a Web server forwards requests to?

• A. The default order in theODR_Module_Routing_Poilicy.xml.
• B. The configuration scope determines which ODRs are included inhttpd.conf.
• C. The configuration scope determines which ODRs are included inplugin-cfg.xml.
• D. The configuration scope determines which ODRs are included inHTTPplugin-cfg.xml.

Answer: C

Explanation:
In a topology with a web server which forwards requests to an on demand router (ODR), the ODR can be set to dynamically generate and update the web server plug-in configuration file plugin-cfg.xml. By configuring an ODR to dynamically update plugin- cfg.xml, you avoid manually updating the file during administrative actions, which can affect the content.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/twve_odr.html

NEW QUESTION 2
When creating a health policy, which condition should be selected to track requests that have a significantly decreased response time?

• A. Workload
• B. Age-based
• C. Storm drain
• D. Excessive response time

Answer: C

Explanation:
The Storm drain condition tracks requests that have a significantly decreased response time.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/cwve_odhealth.html

NEW QUESTION 3
An administrator is using the Guided Troubleshooter in the IBM Support Assistant to troubleshoot IBM WebSphere Application Server issues. After going through data collection and analysis, no reliable solution is found.
What is the administrator’s best next step?

• A. Call ina new PMR with IBM and upload Troubleshooter data to ECuREP.
• B. Open a new PMR with IBM and upload SystemOut.log from the IBM WebSphere Application Server.
• C. Submit results to the IBM WebSphere Application Server forum for a quick response from other forum users.
• D. Use the Guided Troubleshooter to open a service request with IBM, so all the troubleshooting data analyzed so far is uploaded automatically.

Answer: D

NEW QUESTION 4
An administrator needs to resolve port conflicts after creating a managed node using the Profile Management Tool.
Which supported method can be used to resolve the port conflicts?

• A. Editserverindex.xml.
• B. UseupdatePorts.ant.
• C. Use Profile Port Checker tool and set ports.
• D. UsemanageProfiletool and set port range on the profile.

Answer: B

Explanation:
If you discover ports conflicts, then you can reassign ports manually. To reassign ports, run the updatePorts.ant file by using the ws_ant script.
References:https://www.ibm.com/support/knowledgecenter/en/SSEQTP_8.5.5/com.ibm.websphere.base.doc/ae/tpro_instancessaappserv.html

NEW QUESTION 5
Which tool can be used to collect data to be used for monitoring and tuning the environment?

• A. Thread and Monitor Dump Analyzer
• B. Performance Monitoring Infrastructure
• C. IBM Tivoli Performance Viewer Advisor
• D. Garbage Collection and Memory Visualizer

Answer: B

Explanation:
WebSphere Application Server provides Performance Monitoring Infrastructure (PMI) data to help monitor the overall healthof the WebSphere Application Server environment. PMI provides average statistics on WebSphere Application Server resources, application resources, and system metrics. Many statistics are available in WebSphere Application Server, and you might want to understand the ones that most directly measure your site's resources to detect problems.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/tprf_monitoringhealth.html

NEW QUESTION 6
What is one of the benefits of using a federated repository over a user registry?

• A. Does notsupport identity profiles
• B. Supports only one registry in a realm
• C. Supports multiple registries within a realm
• D. Provides account and password policy support

Answer: C

Explanation:
Federated repositories enable you to use multiple repositories with WebSphere® Application Server. These repositories, which can be file-based repositories, LDAP repositories, or a sub-tree of an LDAP repository, are defined and theoretically combined under a single realm. All of the user repositories that are configured under the federated repository functionality are invisible to WebSphere Application Server.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/cwim_fedrepos.html

NEW QUESTION 7
Which of the following statements is true regarding the relationship of nodes and node groups?

• A. Nodes can belong to only one node group.
• B. Nodes managed by a node group cannot be deleted.
• C. All nodes are initially not associated with a node group.
• D. All nodes are initially associated with a default node group.

Answer: D

Explanation:
D: a node must be a member ofa node group. Initially, all Application Server nodes are members of the default DefaultNodeGroup node group.
Note:A node group is a collection of managed nodes.

NEW QUESTION 8
Which type of profile provides management capabilities for multiple stand-alone application
servers?

• A. Custom
• B. Secure Proxy
• C. Administrative agent
• D. Deployment manager

Answer: C

Explanation:
You can use the following different configurations of the application server to combine the plug-in configuration files of multiple application server profiles into a single output file:
* Using multiple stand-alone base application server profiles with an administrative agent using the job manager. The job manager function is a part of WebSphere Application Server Network Deployment. However, you can use the job manager function with stand- alone, base application server profiles. Usethis topic to complete this configuration.
Etc.
References: https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/twsv_configsimplelbadminagentjobmgr.html

NEW QUESTION 9
Which two ways are valid ways to install applications to IBM WebSphere Application Server? (Select two.)

• A. wsadminscript
• B. JMS messaging
• C. IBM Installation Manager
• D. IBM Tivoli Access Manager
• E. Integrated Solutions Console

Answer: AE

Explanation:
Deploy an application or module using the administrative console, wsadmin, programming, or deployment tools.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/crun_app_install.html

NEW QUESTION 10
Which type of fix would typically be downloaded to address a specific problem?

• A. Interim fix
• B. Cumulative fix
• C. Product fix pack
• D. Cumulative interim fix

Answer: A

Explanation:
A WebSphere Commerce interim fix (iFix) is a software patch that contains fixes for one or more APARs. A WebSphere Commerce cumulative iFix is a comprehensive collection of interim fixes for a specific release. Both types of fixes are installed with theWebSphere Commerce Update Installer (UPDI).
Note: An Authorized Program Analysis Report, or APAR, is a formal report from IBM development to customers that have notified IBM of a problem or suspected defect. If IBM development is able to confirm the existence of the issue they will create an APAR with any known work around and perhaps an indication of which future release, if any, of the IBM program they intend to target for a formal fix to the defect and whether or not a Program Temporary Fix (PTF) is planned. The APAR will then be published so that it is visible to supported customers.
References:https://www.ibm.com/support/knowledgecenter/en/SSZLC2_7.0.0/com.ibm.commerce.install.doc/concepts/cig_install_ifixes.htm

NEW QUESTION 11
When administrative security in enabled, what is the minimum administrative role needed to create a resource, install, and uninstall an application?

• A. Monitor
• B. Operator
• C. Configurator
• D. Administrator

Answer: B

Explanation:
An individual or group that uses the configurator role has the monitor privilege plus the ability to change the WebSphere Application Server configuration. The configurator can perform all the daily configuration tasks. For example, a configurator can complete the following tasks:

NEW QUESTION 12
An administrator wants to verify an IBM WebSphere Application Server installation by examining the installation’s directory structure. In this example,
<WAS_installation_directory> indicates the installation’s root directory.
What is one directory tree structure that indicates a successful installation of the product files?

• A. <WAS_installation_directory>/web
• B. <WAS_installation_directory>/bin
• C. <WAS_installation_directory>/profiles
• D. <WAS_installation_directory>/installableApps

Answer: C

Explanation:
WebSphere Application Server Version 8.5.5 for Network Deployment:
/QIBM/UserData/WebSphere/AppServer/V85/ND/profiles/wp_profile/PortalServer
References:https://www.ibm.com/support/knowledgecenter/en/SSYJ99_8.5.0/reference/wp sdirstr.html

NEW QUESTION 13
What does the –Dcom.ibm.webshpere.alarmthreadmonitor.generate.javacore JVM argument do?

• A. Creates a javacore dump when a thread is hung
• B. Generates a Tracemessage that a javacore should be generated
• C. Generates a SystemOut message that a javacore should be generated
• D. Allows the administrator to choose whether or not to generate a javacore when a hang is detected

Answer: A

Explanation:
If you want to monitor the activity of threads on which system alarms execute, add the following JVM generic arguments to the server settings.
-Dcom.ibm.websphere.alarmthreadmonitor.generate.javacore
Set to any value to cause a javacore dump to be created when an hung system alarm threadis detected. The threads section of the javacore dump can be analyzed to determine what the reported thread and other related threads are doing.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/ttrb_confighangdet.html

NEW QUESTION 14
When updating an application, what is important to keep in mind?

• A. The application is only updated during the next server restart.
• B. The applicationis automatically stopped, updated, and restarted.
• C. The application is only updated during the next restart of the application.
• D. The application is stopped, updated, and restarted at the scheduled time.

Answer: B

Explanation:
If the application is updated while it is running, WebSphere Application Server automatically stops the application, updates the application logic and restarts the application.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/crun_app_upgrade.html

NEW QUESTION 15
What can an administrator use to remotely manage multiple stand-alone (unfederated) application servers?

• A. Job Manager
• B. Administrative agent
• C. Deployment manager
• D. remoteServer.jaclscript

Answer: A

Explanation:
Administering nodes remotely using the job manager
In a flexible management environment, you can asynchronouslysubmit and administer jobs for large numbers of stand-alone application servers, deployment managers, and host computers over a geographically dispersed area. At the remote machines, you can use jobs to manage applications, modify the product configuration, or do general purpose tasks such as run a script.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/tagt_jobmgr.html

NEW QUESTION 16
How can an administrator deploy or update an EAR, JAR, WAR, or SAR file to an application server or cluster in a development environment?

• A. Place the file in the monitored directory.
• B. Place the file in the operating system defined temporary directory.
• C. Place the file in the operating system defined user home directory for the user that owns the Java process.
• D. Email the file to wasadmin@hostname.com, where hotname.com is the host of the IBM WebSphere Application Server.

Answer: A

Explanation:
You can install an enterprise application fileon an application server or cluster by dragging or copying an enterprise archive (EAR), web application archive (WAR), Java archive (JAR), or Session Initiation Protocol (SIP) archive (SAR) to a monitored directory.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.doc/ae/trun_app_install_dragdrop.html

NEW QUESTION 17
When installing IBM WebSphere Application Server on a network file system, IBM Installation Manager fails with an insufficient disk space error.
How could this be resolved?

• A. Increase disk space and try again.
• B. Delete temporary files and try again.
• C. Reboot operating system and try again.
• D. Disable disk space checking inthe config.ini and try again.

Answer: D

Explanation:
On some network file systems, disk space might not be reported correctly at times; and you
might need to bypass disk-space checking and proceed with your installation.
To disable disk-space checking, specify the following system property in the config.ini file in IM_install_root/eclipse/configuration and restart Installation Manager.
References:https://www.ibm.com/support/knowledgecenter/SSEQTP_9.0.0/com.ibm.websphere.installation.base.doc/ae/tins_troubleshoot.html

NEW QUESTION 18
An administrator notices that the Message Driven Beans (MDBs) are slow to complete, and decides to increase the ‘Maximum concurrent MDB invocations per endpoint’.
Which thread pool should be tuned to ensure it can run the maximum number of MDBs without waiting?

• A. Default
• B. WebContainer
• C. SIBJMSRAThreadPool
• D. WMQJCAResourceAdapter

Answer: D

Explanation:
The thread pool WMQJCAResourceAdapter is referenced by the WebSphere MQ (WMQ) resource adapter inbound delivery to MDB's. When WebSphere MQ resource adapter is used in conjunction with the activation specs, the resource adapter's Work Manager uses the values defined for the WMQJCAResourceAdapter for utilizing the total number of threads defined.
Ideally the default values provides for the WMQJCAResourceAdapter will be sufficient for the resource adapter. But in case there is an heavy load on the system processing huge
number of messages, you can increase the maximum number of threads the thread pool can hold.
References:http://www-01.ibm.com/support/docview.wss?uid=swg21383363

NEW QUESTION 19
What are two automated administrative tasks that can be done with configuration checkpoints? (Select two.)

• A. delete
• B. restore
• C. archive
• D. backup
• E. compress

Answer: AD

Explanation:
If you want to preserve delta checkpoints, you must archive checkpoints before they are automatically deleted.
A delta checkpoint is created automatically by theproduct each time a configuration change is made.

NEW QUESTION 20
When setting up high availability settings for the web server, at what level should an
administrator configure the custom properties?

• A. cell
• B. node
• C. server
• D. nodeagent

Answer: C

Explanation:
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.5.5/com.ibm.websphere.nd.multiplatform.doc/ae/xrun_jvm.html

NEW QUESTION 21
To write a Jython script to stop a running application server, an administrator should use which administrative object?

• A. AdminApp
• B. AdminTask
• C. AdminConfig
• D. AdminControl

Answer: D

Explanation:
You can use the wsadmin tool to stop applications.
There are two ways to complete this task.Firstly you canuse the AdminControl object to stop the application. Alternatively, you can use the scripts in the AdminApplication script library to start, stop, and administer your application configurations.
References:https://www.ibm.com/support/knowledgecenter/en/SSAW57_8.0.0/com.ibm.websphere.nd.doc/info/ae/ae/txml_stopapplication.html

NEW QUESTION 22
Which of the following gives clues when comparing traces from different processes and correlating events of different servers in the same data center?

• A. Thread ID
• B. Timestamp
• C. Message ID
• D. Exception from top of stack trace

Answer: B

Explanation:
Reading a Trace File
References:ftp://ftp.software.ibm.com/software/iea/content/com.ibm.iea.was_v6/waspdguide/6.0/GeneralPD/SW5706G04_Techniques.pdf, page 26

NEW QUESTION 23
What are two differences between dynamic clusters and static clusters? (Select two.)

• A. Dynamic Workload Management is enabled by default in dynamic clusters.
• B. The application placement controller can start and stop a dynamic cluster that is in automatic mode only.
• C. Using the autonomic request flow manager (ARFM) in manual mode will not affect dynamic cluster mode.
• D. Using static clusters in an Intelligent Management enabled environment will acquire some of a dynamic cluster features.
• E. When creating a static cluster using an application server template, any changes made to the template after creating the instances do not change the instances.

Answer: AE

Explanation:
A:The dynamic workload manager is enabled by default and assigns weights to the application server instances.
E: When you define a static cluster, you can select an application server template on which to base all the application server instances that you create. However, any changes that you make to the template after creating the instances do not change the instances.
References:https://www.ibm.com/support/knowledgecenter/en/SSUP64_7.0.0/com.ibm.websphere.virtualenterprise.doc/odoe_task/rodrcompareclusters.html

NEW QUESTION 24
......