Q1. - (Topic 4)
Which of the following commands will display the current dump device settings?
A. lscfg-d
B. lsdump -d
C. sysdump -v
D. sysdumpdev-l
Answer: D
Q2. - (Topic 3)
One disk within a mirrored rootvg volume group failed and wasreplaced. What is the first action the administrator must take after re-establishing mirroring?
A. Create the boot image on the replaced disk.
B. Recreate/dev/ipldevice.
C. Re-enable volume group quorum.
D. Copy/dev/hd5 to the new disk.
Answer: A
Q3. - (Topic 1)
What is the difference between deferred and concurrent firmware updates?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal program load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will automatically shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains major fixes to the service processor.
Answer: A
Q4. - (Topic 1)
An administrator needs to limit the size of the filesystem cache. Which tuning parameters need to be adjusted?
A. minfree and maxfree
B. minperm and maxperm
C. minfreemem and maxfreemem
D. minpgahead and maxpgahead
E. sb_min and sb_max
Answer: E
Q5. - (Topic 1)
An administrator created logical volume fs01l to contain a JFS2 file system. When trying to create the filesystem the crfs command gives an error. Given the following logical volume definition, which action will correct the error?
A. crfs -vjfs2 -m /fs01 -d /dev/fs01lv
B. mklv-tjfs2-yfs01lvrootvg5
C. chdev-lfs01lv-atype=jfs2
D. chlv-tjfs2fs01lv
Answer: D
Q6. - (Topic 2)
What is the purpose of using tape drive special files?
A. To specify an action during certain tape operations
B. To eject tapes at the end of a tape operation
C. To configure alternate pathing of tape devices
D. To enable the tape SCSI Device Driver for a device
Answer: A
Q7. - (Topic 3)
Which command, when issued from the HMC command line, will attempt to launch a virtual terminal session on Ipar1, running on the sys1 managed system?
A. mkvterm-msys1 -p Ipar1
B. crvterm-ssysy -r Ipar1
C. startvt-h sys1 -I Ipar1
D. startx-vt sys1 -p Ipar1
Answer: A
113. - (Topic 3)
How can an administrator rename hdisk2 to cldisk1?
A. chpv-n cldisk1 hdisk2
B. rendev-I hdisk2 -n cldisk1
C. clcmd-I hdisk2-d cldisk1
D. chdev-I hdisk2-aname=cldisk1
Q8. - (Topic 2)
A customer has purchased two dual-port Fibre Channel and two dual-port Ethernet cards. Which configuration will provide the greatest amount of redundancy for two client partitions?
A. Assign each client one fibre and Ethernet card. Make sure they are cabled to a different network and fibre switches.
B. Assign each client one port on each of the fibre and Ethernet cards. Cable each to a different network or fibre switch.
C. Assign all resources to a VIO server. Create an Etherchannel on thenetwork adapters that connect to different FCoE switches.
D. Create a dual VIO server environment, each with one Ethernet and fibre card. Make sure each card is attached to a different network and fibre switch.
Answer: D
Q9. - (Topic 4)
What determines whether all AIX systems in the virtual environment are at a specified software and fix level and provide an alerting mechanism?
A. Trusted Network Connect and Patch Management
B. AIX Network Install Manager
C. IBM PowerVC – Virtualization Center
D. Security and Compliance Automation
Answer: B
Q10. - (Topic 4)
How can ssh access to an AIX 7 system be restricted to the 192.168.0.1/24 subnet?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C