Q1. - (Topic 3) 

Which tool or function can minimize the impact of planned operating system downtime on active workloads? 

A. Integrated Visualization Manager 

B. Live Application Mobility 

C. Partition Flexibility Mirror 

D. Dynamic Hosting Environment 

E. Micro-Partitioning 

F. Live Partition Mobility 

G. Shared Storage Pools 

View Answer

Q2. - (Topic 2) 

A system administrator wants to create a server with network redundancy and maximum I/O throughput over two Ethernet cards. Which option will support the requirement? 

A. Create an 802.3ad Link Aggregation adapter backed by both Ethernet cards and cable to a switch with 802.3ad enabled ports. 

B. Create a Network Interface Backup (NIB) with each Ethernet card being cabled to a different switch. 

C. Create the file /etc/sysconfig/network-scripts/ifcfg-bond0 then edit the two ifcfg-ethX configuration files to add a master or slave option. Cable to two switches and use 802.3ad enabled ports. 

D. Create a virtual adapter and assign it to the server, use both Ethernet adapters as backing devices to the virtual adapter with the mkvdev command. Have each adapter cabled to separate switches. 

View Answer

Q3. - (Topic 2) 

During a recent network outage, the failover to the secondary DNS server was taking too long. The administrator found the RES_RETRY and RES_TIMEOUT values needed to be updated. Where are these values updated? 

A. /etc/inetd.conf 

B. /etc/rc.net 

C. /etc/security/limits 

D. /etc/environment 

View Answer

Q4. - (Topic 3) 

How can a system administrator verify the progress of an AIX 7.1 client installation from the NIM master? 

A. nim -status 

B. Isnim-I 

C. nim-o check 

D. tail-f/var/adrn/ras/nimclient 

View Answer

Q5. - (Topic 4) 

A company has combined multiple Web servers into one AIX LPAR with a single physical network connection. How can AIX be configured with multiple IP addresses on the same physical connection? 

A. Add the additional IP addresses as aliases in DNS. 

B. Add the IP addresses to the primary hostname line in /etc/hosts. 

C. Add the additional IP addresses as aliases to the network connection. 

D. Assign the IP addresses to virtual Ethernet adapters and map them to the physical network connection. 

View Answer

Q6. - (Topic 1) 

A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the administrator is trying to determine why it cannot be used to reach any other system on the network.He suspects that it may be caused by a problem in the VLAN configuration. 

How would the administrator determine the VLAN for which the adapter was configured? 

A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID. 

B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID. 

C. Look on the HMC to determine which VLAN is configured for the adapter. 

D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter is using. 

View Answer

Q7. - (Topic 4) 

An administrator plans to migrate an LPAR from one host to another using a mksysb restore. The source system has a mirrored rootvg on two 72GB disks. The destination system has one 72GB disk. 

Which of the following would allow the mksysb to be restored successfullyon the destination system? 

A. Update the bosinst.data file for the mksysb target_disk_data value for the volume group. 

B. Ensure the option 'Shrink Filesystems' and 'Use Maps' are set to no when restoring the mksysb. 

C. Update the image.data file for themksysb lv_source_disk_list, copies and PP values for each LV. 

D. Update the image.data file for the mksysb and add the attribute mirror=false under logical_volume_policy stanza. 

View Answer

Q8. - (Topic 4) 

An LPAR is the Global Environment for a number of both Shared and Private System WPARs. An administrator migrated the LPAR from AIX 6.1 to 7.1. What action must be performed to ensure the functionality of all Shared WPARs? 

A. migwpar-A 

B. wparmig -all 

C. instaiip -w-s 

D. update_all-wpar 

View Answer

Q9. - (Topic 1) 

An administrator is required to implement resource control fora running system WPAR called "skippy’. Which flag of the chwpar command will set the CPU Resource control limits for this WPAR to a minimum of 8%. a desired of 35% and a maximum of 45%? 

A. chwpar -c CPU=8%-35%,45% skippy 

B. chwpar-R CPU=8%-35%,45% skippy 

C. chwpar-L CPU=8%-35%,45% skippy 

D. chwpar-r PROC=8%-35%,45% skippy 

View Answer

Q10. - (Topic 4) 

An LPAR is hosted on Power8 hardware. 

How can an adapter assigned as “required” to that LPAR be removed with minimal downtime? 

A. Initiate the Add/Remove procedure from the ASMI 

B. Use the CHARM tool to remove the adapter 

C. Remove the device throughdiag,and DLPAR remove the adapter 

D. Remove the required setting in the profile, and DLPAR remove the adapter 

View Answer