Q1. - (Topic 3) 

What action will prevent the nfsd subsystem from activating at boot time? 

A. Update /etc/inetd.conf to remove the call to startsrc for the NFS subsystem group. 

B. Change the Action attribute from 'wait' to 'once' for the rcnfs line within the /etc/inittab. 

C. Remove the /etc/exports file. 

D. Amend the permissions of/etc/rc.tcpip file to remove execution rights. 

View Answer

Q2. - (Topic 2) 

An administrator created a log logical volume named dbfs2loglv. Given the following output, why did the system create and use a new log logical volume rather than the log logical volume that the administrator specified? 

A. The filesystem was built with amirrored logical volume and 2 log logical volumes are needed. 

B. The administrator created the db2fsloglv log but neglected to format it with the logform command. 

C. The db2fsloglv log was created as a JFS log and a JFS2 log was needed. 

D. There was already another filesystem using the db2fsloglv when the filesystem was created 

View Answer

Q3. - (Topic 1) 

Which configuration will provide an LPAR maximum network resilience and performance with two Ethernet adapters? 

A. Configure both Ethernet adapters as IEEE 802.3ad link Aggregated with src_dst_port mode 

B. Configure EtherChannel using Internet Protocol over InfiniBand (IPoIB) with 64K TCP/IP MTU 64K Superpacket 

C. Configure EtherChannel with one Ethernet adapter as primary adapter & one as backup with hash mode roundrobin 

D. Configure both adapters with Quality of Server (QoS) adapters and configure virtual IP address on interfaces 

View Answer

Q4. - (Topic 4) 

What is the minimum version of AIX that is supported as a Versioned WPAR on an AIX 7.1 system? 

A. AIX 5.3 TL12 SP4 

B. AIX 5.2 TL10 SP8 

C. AIX 6.1 TL3 SP2 

D. AIX 5.1 ML8 

View Answer

Q5. - (Topic 4) 

In addition to enabling remote command execution, which task highlighted in the graphic below must be visited to enable an administrator with hmcoperator permissions to run HMC commands from another server using ssh? 

A. "Change Network Settings" to open pott 22 

B. "Remote Operation" to indicate that this HMC can beoperated from a remote host 

C. "Remote Virtual Terminal" to enable virtual terminal connections for remotely connected HMC 

D. "Manage Task and Resource Roles" to give the hmcoperator task role permission to ssh to the HMC from a remote host 

View Answer

Q6. - (Topic 1) 

After performing a NIM rte install, the administrator noticed that not all filesets are at the correct Technology Level (TL). What action will help the administrator determine why the inconsistent fileset levels were installed? 

A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid. 

B. On the NIM client, run oslevel command against the TL to identifymissing prerequisites. 

C. Run instfix command on NIM client to determine what filesets are inconsistent. 

D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained 

in the lpp_source. 

View Answer

Q7. - (Topic 3) 

Automated scripts on an AIX system require secure non-root access to another AIX instance. Secure Shell (SSH) was the method chosen and installed on both systems. How can an administrator use SSH to create secure automated jobs without storing passwords in the automated scripts? 

A. issue ssh-keygen -t dsa on the source as non-root user append source id_dsa.pub contents to target /etc/ssh/sshd_config file restart sshd daemon 

B. issue ssh-keygen -t dsa on the source as root append source id_dsa.pub contents to /etc/ssh/ssh_config file on the target restart sshd daemon 

C. issue ssh-keygen -t dsa on the source as non-root user append source id_dsa.pub contents to the authorized_keys file on the target restartsshd daemon 

D. issue ssh-keygen -t dsa on the source as non-root user append source id_dsa.pub contents to the authorized_keys file on the target 

View Answer

Q8. - (Topic 2) 

In order to enable an AIX host to use one virtual Ethernet adapter to communicate on multiple VLANs, what is required? 

A. The VLAN devices used by the host must be configured with IP addresses on different subnets. 

B. The virtual Ethernet adapter must be set to full duplex in AIX. 

C. VLAN devices must be configured in the AIX host. 

D. The virtual Ethernet adapter must be configured as a trunk adapter. 

View Answer

Q9. - (Topic 1) 

AIX hasbeen installed on an LPAR with 32 GB of memory. What should be checked first, before increasing the paging space beyond the default 512MB? 

A. The maximum memory attribute in the LPAR profile. 

B. Quantity and size of hosted filesystems. 

C. Disk device distribution and utilization. 

D. Paging requirements of applications that will be hosted. 

View Answer

Q10. - (Topic 4) 

What additional NIM functionality is gained by installing the optional dsm.core fileset? 

A. NIM can query the WWPN of an uninstalled LPAR. 

B. NIM can initiate DLPAR operations against an installed LPAR. 

C. NIM can initiate an automated bos_inst install operation of an LPAR. 

D. NIM can automate a TSM backup before applying APARs or patches 

View Answer