we provide Best Quality EMC DES-1D12 download which are the best for clearing DES-1D12 test, and to get certified by EMC Specialist - Technology Architect Midrange Storage Solutions Exam. The DES-1D12 Questions & Answers covers all the knowledge points of the real DES-1D12 exam. Crack your EMC DES-1D12 Exam with latest dumps, guaranteed!
Check DES-1D12 free dumps before getting the full version:
NEW QUESTION 1
You are upgrading a Dell EMC Unity array to a Dell EMC PowerStore 1000 T array. The customer asks what they need to do so they can map PowerStore snapshots from the new PowerStore array to a host.
What should be your response?
Answer: D
Explanation:
"Volume and Volume Group Snapshots: Snapshots cannot be mapped to a host. To view the contents of a snapshot, you must first clone the snapshot then map the clone to a host."
NEW QUESTION 2
Which features were introduced in SCOS 7.3?
Answer: A
Explanation:
https://dl.dell.com/topicspdf/sc-7-3_rn_en-us.pdf
NEW QUESTION 3
A customer wants to expand their Dell EMC Unity Hybrid system, which includes a pool of 64 drives in a RAID 5 (4+1) configuration. What is the minimum number of drives needed to expand the pool?
Answer: C
Explanation:
DELL PDF document about dynamic pools: h16289-dell_emc_unity-dynamic_pools.pdf
Page 20-21. The smallest RAID 5 stripe width the system supports is a 4+1. The smallest dynamic pool created with the RAID 5 4+1 configuration is 6 drives. The minimum drive count includes the number of drives specified in the stripe width, plus the hot spare capacity. The hot spare capacity is selected by the user at pool creation, and can either be set to 1 or 2 drives for every 32 drives in the pool.
NEW QUESTION 4
What is a key feature of the Dell EMC Future-Proof Storage Loyalty Program for Dell EMC SC Series arrays?
Answer: D
Explanation:
Dell EMC Flash Storage Efficiency Guarantee Dell EMC promises our flash arrays will provide a logical usable capacity at least four times the usable physical capacity of your purchased drives —or we’ll give you more drives at no charge. https://www.delltechnologies.com/en-us/blog/dell-emc-flash-storage-efficiency/
NEW QUESTION 5
When enabling a multi-protocol NAS implementation on a Dell EMC PowerStore array, what is required for an end-to-end mapping of a Windows system?
Answer: D
Explanation:
https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/h18155-dell-emc-pow page 22, multiprotocol, windows section, identifiers
NEW QUESTION 6
A customer wants to provision a file system while creating a NAS server in a Dell EMC PowerStore T system. What information is needed to create the NAS server?
Answer: C
Explanation:
The NAS server DNS can be enabled on the next page. For Directory Services, DNS configuration is required. Add at least one DNS server for the domain.
NEW QUESTION 7
When a remove replication operation is performed on a Dell EMC PowerStore array, what happens to the destination storage resource?
Answer: C
Explanation:
"Removing a replication session is initiated on the source system by removing the protection policy from the Volume or Volume Group on the source system. Removing the protection policy from a storage resource results in the following: * The destination storage resource stays in read-only mode."
NEW QUESTION 8
Match each term with its description.
Answer: A
NEW QUESTION 9
To which bus is the Dell EMC Unity 880F DPE connected?
Answer: D
Explanation:
The DPE on 480/F, 680/F, and 880/F systems is internally connected to Bus 99 which is a separate bus than the first SAS expansion port that is connected to Bus 0. Therefore, the DPE is recognized by the system as Bus 99 Enclosure 0 while the first DAE connected to the first SAS expansion port would be Bus 0 Enclosure 0. This is different than X00/F, X50F, and 380/F systems. Furthermore, this means that the twenty-five drives in front of the DPE for 480/F, 680/F, and 880/F systems are internally recognized as Bus 99 Enclosure 0 Drive 0 – Bus 99 Enclosure 0 Drive 24. In Unisphere, the drives are seen DPE Drive 0 –DPE Drive 24
NEW QUESTION 10
A storage administrator wants to do a tech refresh from a legacy EQL system to a new Dell EMC SC Series array. What is needed to correctly size the new array?
Answer: B
Explanation:
https://downloads.dell.com/manuals/common/sc-series-performance-availability-best-practices-dell-emc-4024-b
Sizing an SC Series array for performance requirements - pag.9)
NEW QUESTION 11
What is a benefit of restoring data from a Dell EMC Unity snapshot?
Answer: D
NEW QUESTION 12
When sizing a Dell EMC Unity Hybrid array, what are considerations for performance?
Answer: A
NEW QUESTION 13
What is a consideration when sizing a Dell EMC SC Series system for capacity?
Answer: C
NEW QUESTION 14
What is the Dell EMC best practice for sizing and designing a Dell EMC SC Series solution?
Answer: C
NEW QUESTION 15
What is a consequence of using an 800 GB drive and five 400 GB drives in a Dell EMC Unity XT dynamic pool?
Answer: C
Explanation:
The entire capacity of a particular drive size is only available when the drive count within the drive partnership group for the drive in question matches or exceeds the stripe width plus one drive. It is not recommended to mix different size drives of the same type for this reason, unless an adequate number of drives are available to meet or exceed the stripe width plus one drive requirement
h16289-dell_emc_unity-dynamic_pools.pdf - Page 18-19
NEW QUESTION 16
For Dell EMC SC Series arrays, what is the minimum percentage of total system IOPS that should be applied to Tier 3 drives?
Answer: B
Explanation:
"As a standard, tier 3 drives should encompass a minimum of 20% system IOPS potential."
NEW QUESTION 17
Match each Dell EMC Unity feature with its destination.
Answer: A
NEW QUESTION 18
What is the purpose of the NVMe NVRAM drives in a Dell EMC PowerStore 9000 array?
Answer: D
NEW QUESTION 19
You are designing a two-tiered Dell EMC SC Series solution that will be optimized for performance. You gather the necessary data from Live Optics and find that the read/write ratio is 80:20.
What approach is recommended?
Answer: A
Explanation:
"The engineer should design a system to handle all, or nearly all, IOPS in one particular tier"
NEW QUESTION 20
......
Recommend!! Get the Full DES-1D12 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/DES-1D12-dumps.html (New 64 Q&As Version)