NEW QUESTION 1
When configuring the PPP authentication method as PAP, which of the following operations are necessary?(Choose three)

• A. Add the user name and password of the authenticated party to the local user list
• B. Configure the encapsulation type of the interface connected to the peer as PPP.
• C. Configure PPP authentication method as CHAP
• D. On the authenticated party end, configure the user name and password that are sent to authenticator

Answer: ABD

NEW QUESTION 2
In a small network suppporting IPv6, a network administrator wishes implement RIPng. Which of the followingcommands should be used to enable this protocol?

• A. [RTA-GigabitEthernet0/0/0]ripng 1 enable
• B. [RTA]ripng 1 enable
• C. <RTA>ripng 1 enable
• D. [RTA-ripng-1]ripng 1 enable

Answer: A

NEW QUESTION 3
A serial interface of a Huawei router currently using HDLC needs to assign PPP as the encapsulation protocol.
Which of the following commands is required to be configured at the serial interface view?

• A. link-protocol ppp
• B. encapsulation ppp
• C. enable ppp
• D. address ppp

Answer: A

NEW QUESTION 4
A client failed to transfer a file to the FTP server, but found the IP connectivity was without problem. The clientassumed that the problem was with the port configuration. The blocking of which ports wouldlikely cause thisproblem?(Choose two)

• A. 21
• B. 80
• C. 20
• D. 50649

Answer: AC

NEW QUESTION 5
What benefits does port aggregation yield?(Choose three)

• A. Improves link bandwidth
• B. Implements load sharing
• C. Improves network reliability
• D. Facilitates data copy for analysis

Answer: ABC

NEW QUESTION 6
Refer to the graphic. In order to improve security, the two hosts use IPsec VPN to transmit data. Which IPsecmode and protocol can be used to hide the host’s IP address?(Choose two).

• A. AH
• B. transport mode
• C. tunnel mode
• D. ESP

Answer: CD

NEW QUESTION 7
An AR2200 router in the company network cannot boot. In order to resolve this, the administrator wishes toupdate the VRP software. What should he/she do?

• A. The administrator should use a console cable to connect the router and host, and directly upgrade thedevice.
• B. The administrator should use FTP to transfer the VRP software, by configuring the AR2200 router as anFTP client.
• C. The administrator should use DHCP to boot the AR2200, and then use the AR2200 router as a TFTP clientto download the VRP software from the server.
• D. The administrator should use the telnet command on the client to remote access the device, and upgradethe VRP software.

Answer: B

NEW QUESTION 8
An administrator wishes to manage the router in the remote branch office, which method can be used?

• A. Telnet
• B. FTP
• C. Console Connection
• D. DHCP

Answer: A

NEW QUESTION 9
If Frame Relay implements dynamic address mapping for the PVC,which protocol will be used?

• A. LMI protocol.
• B. ARP protocol.
• C. RARP protocol.
• D. InARP protocol

Answer: D

NEW QUESTION 10
Which of the following storage devices is used to store the startup configuration files in a router?
<choice ident="A">
<choice ident="B">
<choice ident="C">
<choice ident="D">

• A. SDRAM
• B. NVRAM
• C. Flash
• D. BootROM

Answer: B

NEW QUESTION 11
Which of the following items can be translated by NAPT?

• A. MAC address + port number
• B. IP address + port number
• C. Only MAC address
• D. Only IP address

Answer: B

NEW QUESTION 12
What functions does a Hello packet of OSPF implement?(Choose two)

• A. Neighbor discovery
• B. Deletion of unreachable neighbors.
• C. Maintaining of neighbor relationships.
• D. Negotiation of parameters among adjacent ports.

Answer: AC

NEW QUESTION 13
To establish multiple PPP point-to-point connections in the Ethernet network, a PPPoE server establishesconnections with multiple PPPoE clients on one Ethernet port. How does PPPoE differentiate between eachconnection?

• A. MAC address.
• B. IP address and MAC address
• C. MAC address and ppp-id
• D. MAC address and session-id

Answer: D

NEW QUESTION 14
Which of the following technologies can allow a host with IP address 10.0.0.1 to access the internet?

• A. Static route
• B. Dynamic route
• C. Route import
• D. NAT

Answer: D

NEW QUESTION 15
Refer to the graphic. RTA and RTB are connected over a Frame Relay network using a DLCI, as shown. Staticmapping is required on RTA. Which of the following commands will achieve this?

• A. [RTA-Serial1/0/1]fr map ip 172.16.1.1 30
• B. [RTA-Serial1/0/1]fr map ip 172.16.1.1 31
• C. [RTA-Serial1/0/1]fr map ip 172.16.2.1 30
• D. [RTA-Serial1/0/1]fr map ip 172.16.2.1 31

Answer: C

NEW QUESTION 16
10.0.1.0/24 O_ASE 150 2 D 10.0.23.3 Serial2/0/0
Refer to the display output. Which of the following statements regarding route shown are true?(Choose two)

• A. The address 10.0.23.3 has been configured on the peer’s serial 2/0/0 interface.
• B. The route preference has been changed by the adminstrator.
• C. The metric for the route 10.0.1.0 indicates that two hops are needed.
• D. The route has been learned via the OSPF protocol.

Answer: AD

NEW QUESTION 17
Which of the following statements about a designated port working in RIPv2 multicast mode are true?(Choose three)

• A. The port receives only RIPv2 multicast packets.
• B. The port does not receive RIPv1 broadcast packets.
• C. The port does not receive RIPv2 broadcast packets.
• D. The port receives only RIPv1 multicast packets.

Answer: ABC

NEW QUESTION 18
The IP addresses of clients in the network are deployed via a DHCP server. When a host reboots, whichmessage will the host first send to the DHCP server?

• A. DHCP DISCOVER
• B. DHCP REQUEST
• C. DHCP OFFER
• D. DHCP ACK

Answer: B

NEW QUESTION 19
Which command can be used to check the PPPoE client session status?

• A. display ip interface brief
• B. display current-configuration
• C. display pppoe-client session packet
• D. display pppoe-client session summary

Answer: D

NEW QUESTION 20
Refer to the graphic. R1,R2 and R3 are running RIPv1. R1 and R3 both advertise 172.16.0.0 to the RIPnetwork. How will this affect R2?

• A. R2 will not have a route to the networks 172.16.1.0/24 and 172.16.2.0/24
• B. R2 will only have a route to 172.16.1.0/24
• C. R2 will only have a route to 172.16.2.0/24
• D. R2 will have a route to both networks 172.16.1.0/24 and 172.16.2.0/24, but some packets for these destinations will be lost.

Answer: D