NEW QUESTION 1
A layer 2 LAN switch generates CAM table entries according to the ( ) of the received frame.

• A. Source MAC address
• B. Destination MAC address
• C. Source IP address
• D. Destination IP address

Answer: A

NEW QUESTION 2
Refer to the graphic. Host A is located in a private network. It is required that Host A not only be capable ofrouting traffic over the public network, but also that public users are able to actively communicate with Host A.
Which NAT translation method should be configured on the gateway?

• A. Static NAT
• B. Dynamic NAT
• C. Easy-IP
• D. NAPT

Answer: A

NEW QUESTION 3
Which of the following descriptions regarding IPv6 addresses are correct?(Choose two)

• A. IPv6 addresses are 64 bits in length.
• B. IPv6 addresses are 128 bits in length.
• C. IPv6 extension headers are processed in order.
• D. IPv6 extension headers are processed randomly.

Answer: BC

NEW QUESTION 4
When using VRP, which of the following commands is used to configure the PPP authentication method asPAP?

• A. ppp pap
• B. ppp authentication-pap
• C. ppp authentication-mode pap
• D. ppp pap-authentication

Answer: C

NEW QUESTION 5
When R2 forwards data to R3 from R1, which of the following items will change?(Choose two)

• A. The source MAC address
• B. The destination MAC address
• C. The source IP address
• D. The destination IP address

Answer: AB

NEW QUESTION 6
What is the meaning of 200 in the command "fr map ip 10.1.1.2 200"?

• A. remote logical channel ID
• B. local DLCI
• C. remote interface ID
• D. remote node ID

Answer: B

NEW QUESTION 7
The network administrator has configured the router as shown. Which statement is false?

• A. The configuration manages the user login through the console interface.
• B. The user login through vty 0 has the privilege to run level 2 commands.
• C. The user login through telnet has the privilege to run level 2 commands.
• D. The configuration manages the telnet user login.

Answer: A

NEW QUESTION 8
An administrator connects two switches together in a local enterprise network. The ports of one switch supportFast Ethernet, while the ports of the other switch support Gigabit Ethernet. Hosts connected to one switch areable to communicate, however communication between the two switches fails. What is the possible reason forthis?

• A. The ports have disabled auto-negotiation.
• B. One port is supporting auto-negotiation, while auto-negotiation is disabled on the port of the other switch.
• C. The port of one switch is operating using half duplex mode, while the port of the other switch is using fullduplex mode.
• D. A Fast Ethernet port cannot communicate directly with a Gigabit Ethernet port.

Answer: A

NEW QUESTION 9
Which of the following statements regarding Designated Routers in OSPF are correct?(Choose three)

• A. DR is elected by all the routers in the same network segment.
• B. If the priorities of two routers are different, the router with the lower priority will be elected as DR.
• C. If the priorities of two routers are equal, the router with the higher Router ID will be elected as DR.
• D. DR and BDR must be adjacent.

Answer: ACD

NEW QUESTION 10
The administrator cannot use telnet to manage the AR2200. The administrator is able to verify connectivity tothe router and has been informed that other administrators have no difficulties using telnet. Which statementsdescribe the possible reasons for this problem?(Choose two)

• A. The user’s status has been blocked
• B. The user’s priviledge level has been changed to 0.
• C. The user has been deleted.
• D. The telnet service in the AR2200 router has been disabled.

Answer: AC

NEW QUESTION 11
An end system is unable to communicate with a DHCP server following the startup process. Which IP addressmay be used by the client?

• A. 0.0.0.0
• B. 127.0.0.1
• C. 169.254.2.33
• D. 255.255.255.255

Answer: C

NEW QUESTION 12
Interface G0/0/1 on RTA contains a MAC address of 00e0-fc03-aa73 and is configured with the IPv6 address2001::2E0:FCFF:FE03:AA73. Which method is most likely to have been used to configure the interface IPv6address?

• A. DHCPv6
• B. Auto-link
• C. ARP
• D. EUI-64

Answer: D

NEW QUESTION 13
<Huawei>reset saved-configuration
Warning: The action will delete the saved configuration in the device. The configuration will be erased to reconfigure. Continue? [Y/N]:
Refer to the configuration output. Which of the following statements are true? (Select two answers)

• A. A user should enter ‘Y’ when wishing to clear the saved configuration file.
• B. The saved-configuration file that the device starts with can be erased.
• C. The saved-configuration will be deleted after typing N
• D. The saved-configuration file will be replaced with the current-configuration.

Answer: AB

NEW QUESTION 14
Which of the following statements about the information contained in a Database Description packet are true?(Choose three)

• A. A Database Description packet contains all information about each LSA.
• B. A Database Description packet contains only the header of an LSA.
• C. The header of an LSA is the unique identifier of the LSA.
• D. The header of an LSA is only a small portion of all the data of the LSA.

Answer: BCD

NEW QUESTION 15
Which of the following statements regarding the DR in an OSPF network are correct?(Choose two)

• A. There must be at least one DR in an OSPF area.
• B. A DR must be elected among the routers through the negotiations that are defined by OSPF protocol.
• C. Only the router with highest priority will be elected as DR.
• D. Only NBMA or Broadcast networks need to elect DR

Answer: BD

NEW QUESTION 16
Which of the following is abbreviation of VRP?

• A. Versatile Routine Platform
• B. Virtual Routing Platform
• C. Virtual Routing Plane
• D. Versatile Routing Platform

Answer: D

NEW QUESTION 17
When a router is powered on, the router reads the configuration file saved in the default
save directory to getitself initialized. If the configuration file does not exist in the default save directory, what does the router use toinitialize itself?

• A. New configuration file
• B. Initial configuration file
• C. Default parameters
• D. Current configuration file

Answer: C

NEW QUESTION 18
Two routers are configured with OSPFv3. OSPFv3 is enabled on all interfaces of each router. Which of thefollowing is true in the event that the network administrator does not configure a Router-ID?

• A. The IP address of the loopback 0 interface will be used as the router ID
• B. The IP address of the loopback 1 interface will be used as the router ID
• C. The IP address of interface G0/0/0 will be used as the router ID
• D. No router ID will be assigned to the router.

Answer: D

NEW QUESTION 19
On VRP platform, which of the following parameters can be used together with the "ping" command to specifythe source address of an echo request message?

• A. A
• B. S
• C. D
• D. N

Answer: A

NEW QUESTION 20
What is the maximum number of member interfaces supported by a single Eth-Trunk?

• A. 6.
• B. 8.
• C. 10
• D. 12.

Answer: B