NEW QUESTION 1

Which system users intelligent Audio to cancel out background noise?

• A. DX70
• B. DX80
• C. Spark
• D. Jabber

Answer: B

NEW QUESTION 2

What happens when there is no entry in the Layer 2 CAM table that corresponds to the destination MAC address of an incoming frame?

• A. The frame is flooded out of all forwarding ports in all VLANs.
• B. The frame is flooded out of all forwarding ports in its VLAN, except the port on which it is received.
• C. The switch drops the frame.
• D. The frame is flooded out of all forwarding ports in its VLAN, including the port on which it is received.

Answer: B

NEW QUESTION 3

Which statement is true about the crossconnections between 5k’s and 7k’s in the network?

• A. VLAN 100 is the native VLAN
• B. 56 extended VALN are configured in the network
• C. VLANs 125-150 are allowed on the cross connections between the 7k’s and 5k’s
• D. VLANs 100-124 are err-disabled on the cross connections between the 7k’s and 5k’s

Answer: C

NEW QUESTION 4

Which statement is true regarding Subzones?

• A. Endpoints are assigned to aparticular Subzone by their alias or IP subnet
• B. Subzones require the use of endpoint authentication.
• C. Endpointsrequire the use of other endpoints tor authentication
• D. Subzones are used for routing calls to peers in other parts of the network

Answer: A

NEW QUESTION 5

Which is included in an endpoint's registration request message sent to a SIP Server?

• A. E 164 URI
• B. E 164 address
• C. SIP Server IP address
• D. Endpoint IP address

Answer: C

NEW QUESTION 6

Drag and drop the CLI configuration command on the left to the correct order on the right to configure a Layer 3 interface. Not all options are used.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

Interface ethernet1/13 No switchport
Ip address 192.168.1.254/24 No shutdown

NEW QUESTION 7

Which is a method used by the Expressway for bandwidth control?

• A. Subzones
• B. Regions
• C. Hunt Groups
• D. Zones

Answer: A

NEW QUESTION 8

What protocol does an Expressway use to send the call setup message in an H.323 call?

• A. H.245
• B. H.239
• C. T.120
• D. Q.931

Answer: D

NEW QUESTION 9

Which router type is the most trustworthy for a Cisco routing device?

• A. EIGRP dynamic
• B. static
• C. BGP dynamic
• D. OSPF dynamic

Answer: A

NEW QUESTION 10

Which two of the following statements are true with respect to STP in this network? (Choose 2)

• A. Both 5k’s have BPDU Guard and BPDU Filter enabled by default, while both 7k’s do not
• B. Both 5k’s bridge Assurance enabled, while both 7k’s do not
• C. 7k’s is the root bridge for VLANs 100-150
• D. Both 7K-3 and 7k-4 being vPC peers, are the root bridge for VLANs 100-150
• E. No devices have a root cost higher than 1, since all devices are no more that 1 hop away from each other

Answer: BE

NEW QUESTION 11

For witch reason would you implement a VSAN?

• A. to overcome the limitation of zoing
• B. to virtualize storage
• C. to segment the physical fabric into multiple logical fabrics
• D. to overcome the limitations of LUN masking

Answer: C

NEW QUESTION 12

How many bits are used for a subnet ID in an IPv6 address?

• A. 48
• B. 16
• C. 64
• D. 128
• E. 10

Answer: B

NEW QUESTION 13

The MAC address table on a Cisco Nexus Server switch is full .What Layer 2 network behavior will occur while the network MAC address table remains full?

• A. All frames will be flooded.
• B. Frames with an unknown destination address will be flooded.
• C. The switch reset the Mac address tabl
• D. removin all MAC addresses.
• E. The stitch will remove all dynamically MAC address from the table

Answer: B

NEW QUESTION 14

Which statement describes the use of zones in a VSAN?

• A. zones are configured at the fabric core.
• B. An HBA or storage device can belong to one zone.
• C. zones limit unicast, multicast, and broadcast traffic.
• D. zones are a group ports within a single VSAN.

Answer: D

NEW QUESTION 15

In fiber Channel networking, the FCID composed of which of the following?

• A. VSANID, area ID, port ID
• B. domain ID, zone ID, port ID
• C. domain ID, area ID, port ID
• D. VSAN ID, zone ID, port ID

Answer: D

NEW QUESTION 16

A network engineer needs to configure an SVI on a Cisco Nexus Series switch After configuring VLAN 10, which set of commands must the engineer enter, to complete the SVI configuration?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 17

If a user of a SIP endpoint registered to an Expresswayconfigured with only the vidoe.com domain physically dials. ''6501'', what alias is presented in the SIP invite message?

• A. 6501@<ip address of the endpoint
• B. 6501
• C. 6501 @<ip address of the Expressway
• D. 6501@vidoe.com

Answer: C

NEW QUESTION 18

Which two options are block-based storage protocols? (Choose two.)

• A. NFS
• B. iSCSI
• C. NAS
• D. FCoE
• E. CIFS

Answer: BD

NEW QUESTION 19

Which two VTP modes allow the creation of local VLANs? (Choose two.)

• A. transparent
• B. native
• C. server
• D. client
• E. on

Answer: AC

NEW QUESTION 20

Drag and drop the feature on the left to the correct description on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Authorization = Provide access control and verifies whether the connected user can execute a submitted
command.
Authentication = The process of verifying the identity of the person or device accessing the resource. Accounting = Provides a method to collect and log information, and send the information to the AAA server
for billing, auditing, and reporting
RBAC = A method of restricting or authorization system access for users based on user roles and locales.

NEW QUESTION 21

Which is a feature available in Expressway version 8.9?

• A. The ability to register desktop phones
• B. Global phone books
• C. SRST redundancy
• D. The ability to register video endpoints

Answer: D

NEW QUESTION 22

What describes how the 802.1Q protocol lactates the transmission of multiple Layer 2 networks on a single link?

• A. adds 802.1Q tag information between the source MAC address and the Ether Type/Length fields
• B. encapsulates the frame inside an 802.1Q tunnel
• C. adds 802.1Q tag information between the preamble and the destination MAC address
• D. encapsulates the packet inside an 802.1Q tunnel
• E. transparently directs packets based on 802.1Q tags inside the header

Answer: A

Explanation:
EEE 802.1Q uses an internal tagging mechanism which inserts a 4-byte tag field in the original Ethernet frame itself between the Source Address and Type/Length fields
http://www.cisco.com/c/en/us/support/docs/lan-switching/8021q/17056-741-4.html#topic2

NEW QUESTION 23

Refer to the exhibit.

How many broadcast domains are represented'?

• A. 1
• B. 2
• C. 3

Answer: D

NEW QUESTION 24

TMS is a virtual application that relies on what Operating System?

• A. Linux Ubuntu
• B. Oracle
• C. MS Access
• D. Windows Server

Answer: D

NEW QUESTION 25

Refer to the exhibit.

Regarding the OSI networking model and the updated TCP/IP networking model, which statement about this scenario is true?

• A. Model A is TCP/IP, Model B is OSI, Layer C is Transport, Layer D is Internet, and Layer E is Physical.
• B. Model A is OSI, Model B is TCP/IP, Layer C is Session, Layer D is Network, and Layer E is Physical.
• C. Model A is OSI, Model B is TCP/IP, Layer C is Transport, Layer D is Data Link, and Layer E is Physical.
• D. Model A is TCP/IP, Model B is OSI, Layer C is Transport, Layer D is Internet, and Layer E is Network Access.

Answer: C

NEW QUESTION 26

A customer requires two separate physical pathways between multiple initiators and multiple targets. Which technology meets this requirement on a single Cisco MDS9148 switch?

• A. zoning
• B. port security
• C. LUN masking
• D. VSANs

Answer: D

NEW QUESTION 27

Drag and drop the zoning type on the left to the correct description on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 28

How many video endpoints can call into a CMR Cloud meeting?

• A. 10
• B. 25
• C. 50
• D. 8

Answer: A

NEW QUESTION 29








Which statement Is true regarding configuring NPV mode?

• A. When you enable NPV, the system configuration is erased and t* switch reboots
• B. When you enable NP
• C. the system configuration is not erased and the does not switch reboot
• D. In Exhibit 3 NPV is enable
• E. but Server interface to the external switch is not bed to correct vfc 2/1.
• F. m NPV mode, the core switch relays traffic from server-side ports to the edge switch and core swtich provides N ports.

Answer: A

Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/CL

NEW QUESTION 30

Drag and drop the FCoE protocols on the left to the correct descriptions on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
DCBXP =used to announce, exchange, and negotiate node parameters between peers ETS = provides prioritized processing based on bandwidth allocation
PFC = Flow control mechanism
FIP =perform device discovery, initialization, and link maintenance

NEW QUESTION 31
......