[2021-New] Microsoft 70-417 Dumps With Update Exam Questions (71-80)

70-417 Dumps

70-417 Exam Questions - Online Test

70-417 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Q1. Your network contains an Active Directory domain named contoso.com. The domain

contains three servers named Server1, Server2, and Server3.

You create a server group named ServerGroup1.

You discover the error message shown in the following exhibit. (Click the Exhibit button.)

You need to ensure that Server2 can be managed remotely by using Server Manager.

What should you do?

A. On Server2, run the netdom.exe command.

B. On Server2, run the net stop netlogon command, and then run the net start netlogon command.

C. On DC1, run the Enable-PSSessionConfigurationcmdlet.

D. On Server2, modify the membership of the Remote Management Users group.

Answer: D

Explanation:

This is a security issue. To be able to access Server2 remotely through Server Manager the user need to be a member of the Remote Management Users group. References: Training Guide: Installing and Configuring Windows Server 2012, Chapter 3 Server Remote Management, Lesson 1: Server Manager, p. 90-92

Q2. RAG DROP

Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 is configured as a Network Policy Server (NPS) server and as a DHCP server.

You need to log all DHCP clients that have windows Firewall disabled.

Which three actions should you perform in sequence? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Q3. You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server 2012 R2.

You need to schedule the installation of Windows updates on the cluster nodes.

Which tool should you use?

A. The Add-CauClusterRolecmdlet

B. TheWuauclt command

C. TheWusa command

D. The Invoke-CauScancmdlet

Answer: D

Explanation:

The Invoke-CauScancmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.

http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx http://technet.microsoft.com/en-us/library/cc720477(v=ws.10).aspx http://support.microsoft.com/kb/934307 http://technet.microsoft.com/en-us/library/hh847228(v=wps.620).aspx

Q4. You have a server named Server1 that runs Windows Server 2012 R2.

You plan to enable Hyper-V Network Virtualization on Server1.

You need to install the Windows Network Virtualization Filter Driver on Server1.

Which Windows PowerShell cmdlet should you run?

A. Set-NetVirtualizationGlobal

B. Enable-NetAdapterBinding

C. Add - WindowsFeature

D. Set-NetAdapterVmq

Answer: B

Explanation: Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each virtual network operates as if it is running as a physical network. The The Set-NetAdaptercmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address. Thus if you add the binding parameter to the command then you will be able to install the Windows Network Virtualization Filter Driver. Step one:Enable Windows Network Virtualization (WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the server.This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose and it is not some global setting.If you have one External Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch -SwitchType External# Check if Network Virtualization is bound# This could be done by checking for the binding and seeing if it is enabledForEach-Object -InputObject $vSwitch {if ((Get-NetAdapterBinding -ComponentID "ms_netwnv" -InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable itEnable-NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID "ms_netwnv"}}

Q5. Your network contains an Active Directory domain named contoso.com. The domain contains a read-only domain controller (RODC) named RODC1.

You create a global group named RODC_Admins.

You need to provide the members of RODC_Admins with the ability to manage the hardware and the software on RODC1. The solution must not provide RODC_Admins with the ability to manage Active Directory objects.

What should you do?

A. From Active Directory Users and Computers, configure the Managed By settings of the RODC1 account.

B. From Windows PowerShell, run the Set-ADAccountControlcmdlet.

C. From a command prompt, run the dsadd computer command.

D. From Active Directory Sites and Services, run the Delegation of Control Wizard.

Answer: A

Q6. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1.

What should you do first?

A. From a command prompt on Server2/ run winrm.exe.

B. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.

C. From Server Manager on Server2, enable Windows Remote Management.

D. From Windows PowerShell on Server1, run Install-WindowsFeature.

Answer: C

Q7. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC5. DC5 has a Server Core Installation of Windows Server 2012 R2.

You need to uninstall Active Directory from DC5 manually.

Which tool should you use?

A. The Remove-ADComputercmdlet

B. The ntdsutil.exe command

C. The dsamain.exe command

D. The Remove-WindowsFeaturecmdlet

Answer: D

Explanation: http://technet.microsoft.com/en-us/library/hh472163.aspx#BKMK_RemoveSM http://technet.microsoft.com/en-us/library/cc732257.aspx#BKMK_powershell

Q8. Your IT manager is concerned that someone is trying to gain access to your company's computers by logging on with valid domain user names and various password attempts.

Which audit policy should you monitor for these activities?

A. Policy Change

B. Account Logon

C. Privilege Use

D. Directory Service Access

Answer: B

Explanation:

Old (removed questions as came out before the exam release =>unvalid but can be The Account Logon audit category in Windows Server 2008 generates events for credential

validation. These events occur on the computer that is authoritative for the credentials

Q9. A user from your organisation has reported to the IT helpdesk that they are receiving the following message:

"Your account is configured to prevent you from using the computer. Please try another computer."

What should you do to enable them to log on to their computer?

A. Use the Dsmove command

B. Click the Log On To button on the Account tab of her user account

C. None of these

D. Click the Allowed To Join Domain button in the New Computer dialog box

Answer: B

Explanation:

The error message is about the user account configuration. This can be set here:

Q10. You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.

You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum amount of administrative effort.

What should you perform?

A. An online servicing by using Dism

B. An offline servicing by using Dism

C. An upgrade installation of Windows Server 2012 R2

D. A clean installation of Windows Server 2012 R2

Answer: A

Explanation:

A. Not least effort

B. Not least effort

C. dism /online /set-edition

D. offline would be less ideal and more workex: DISM /online /Set-Edition:ServerEnterprise / ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing andManagement tool). This tool has many features, but one of those features is the ability to upgrade the edition ofWindows in use. Note that this process is for upgrades only and is irreversible. You cannot set a Windowsimage to a lower edition. The lowest edition will not appear when you run the /Get-TargetEditions option. If the server is running an evaluation version of Windows Server 2012 R2 Standard or Windows Server 2012 R2Datacenter, you can convert it to a retail version as follows: If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additionaldomain controller on a server that runs a retail version and remove AD DS from the domain controller thatruns on the evaluation version. From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXXXXXXX-XXXXX-XXXXXXXXXX /AcceptEula,providing the edition ID and a retail product key. The server will restart twice. http://technet.microsoft.com/en-us/library/jj574204.aspx http://technet.microsoft.com/en-us/library/dd744380%28v=ws.10%29.aspx http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading- windows-server2008-r2- without-media.aspx http://communities.vmware.com/people/vmroyale/blog/2012/05/30/howto-

upgradingwindows- edition-with-dism