NEW QUESTION 1
Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

• A. HPE Intelligent Provisioning
• B. HPE Global Dashboard
• C. iLO Amplifier Pack
• D. HPE Composer

Answer: C

Explanation:
References: https://www.slideshare.net/Xylos/hpe-infosight-for-servers

NEW QUESTION 2
An integrator has installed a new Synergy frame into a rack with two existing Synergy frames in a customer’s environment.
Click where the integrator should verify that the cabling for the management ring was completed correctly.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 3
A customer needs to significantly improve I/O performance to a database server.
Which product should an integrator implement as part of a Synergy composable solution?

• A. HPE Synergy D3940 storage module with SSD drives
• B. HPE Composer with NVMe drives
• C. HPE Synergy compute module with a Tesla accelerator
• D. HPE Synergy Image Streamer

Answer: A

NEW QUESTION 4
A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard.
According to HPE best practices, how should an integrator deploy these components?

• A. Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.
• B. Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.
• C. Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.
• D. Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.

Answer: B

NEW QUESTION 5
During a first-time installation of HPE Synergy, an external monitor is not available to the integrator. Which approach should the integrator take to perform the first-time setup?

• A. Download MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.
• B. Download VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.
• C. Download Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.
• D. Download PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).

Answer: B

NEW QUESTION 6
A customer is planning to deploy OneView for vCenter Server to improve management procedures for growing virtualization environment. The customer is concerned about resources required by HPE OneView for vCenter Server.
Which statement about deploying HPE OneView for vCenter Server is true?

• A. It is deployed as an application on the Windows Server machine with at least 48GB of memory.
• B. It is deployed as a part of the HPE Composer installation.
• C. It is deployed as a virtual machine on the supported hypervisor.
• D. It can only be deployed if HPE Global Dashboard is already installed.

Answer: C

NEW QUESTION 7
A customer has forgotten the password for the HPE Composer managing the customer’s HPE Synergy Infrastructure.
Where can the customer reset the password with the assistance of HPE Support?

• A. FLM Access to Synergy Console
• B. Virtual Center server
• C. Front Access Panel to Synergy Console
• D. Maintenance Console screen

Answer: A

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00028780en_us&docLocale=en_US

NEW QUESTION 8
A customer wants to add nodes to the existing ESXi cluster using the HPE OneView for vCenter Server. What must be done before this functionality can be used?

• A. The cluster must be imported to HPE OneView
• B. An additional VMkernel port must be created for OneView integration
• C. All local datastores must be disconnected or removed from the other cluster nodes
• D. At least one node of the cluster must be placed in the maintenance mode

Answer: A

NEW QUESTION 9
A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network.
Which procedure should the integrator use to address the customer’s concern?

• A. Connect the RJ-45 front ports of each frame to an external switc
• B. Then, connect the uplink from the external switch into the customer’s management network.
• C. Connect FLMs from all frames to two external switches for redundanc
• D. Then, connect the two uplinks from the two switches into the customer’s management network.
• E. Connect the RJ-45 front ports of each frame to two external switches for redundanc
• F. Then, connect the uplink from the two switches into the customer’s management network.
• G. Connect FLMs from all frames into a management rin
• H. Then, connect the management ring to the customer’s management network using two uplinks.

Answer: D

NEW QUESTION 10
Match each HPE server platform with optimal workload.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 11
Match each interconnect device with its appropriate use case.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05385134 https://h20215.www2.hpe.com/v2/GetPDF.aspx/c04815127.pdf

NEW QUESTION 12
A customer is using HPE Synergy Composer to manage the compute module and 3PAR volume attachments.
The datastore attached to the VMware servers has run out of space.
What is the most efficient procedure the integrator should follow to extend the volume with minimum effect on the compute modules?

• A. Set the volume to maintenance mode, and increase the volume in 3PAR SSMC
• B. Increase the capacity of the volume in the combined profile form
• C. Create a snapshot, and increase the capacity of the snapshot directly in the Synergy Composer
• D. Increase the capacity of the volume directly in the Synergy Composer

Answer: D

NEW QUESTION 13
An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.
Click on the parameter that the integrator needs to verify.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14
A customer needs to attach 20 HPE 1 TB SATA 6G SFF hard drives to an HPE Synergy 480 Gen10 compute module.
Which HPE products are necessary to meet the requirements? (Choose three.)

• A. HPE D3940 storage module
• B. HPE Synergy 12Gb SAS Connection Module
• C. HPE 10GbE SynergyPass-Thru Module
• D. HPE Smart Array P416ie-m Controller
• E. HPE Smart Array P542D Controller

Answer: BDE

NEW QUESTION 15
A customer has the following HPE Synergy solution:
three Synergy frames
two HPE Virtual Connect SE 32Gb Fibre Channel (FC) modules in each time
two HPE Virtual Connect SE 40GB F8 modules
four HPE Synergy 10Gb Interconnect Link Modules
Click the menu option the integrator should use to add more uplinks ports from HPE Virtual Connect SE 32 Gb FC modules to SAN uplink set.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References: https://h20215.www2.hpe.com/v2/GetPDF.aspx/c04815258.pdf

NEW QUESTION 16
Which technology used in HPE SimpliVity allows a reduction in storage consumption?

• A. trunking
• B. hashing
• C. consolidation
• D. compression

Answer: D

NEW QUESTION 17
Which policy can an integrator apply when creating a datastore using HPE OneView for vCenter Server?

• A. Data at Rest encryption policy
• B. Round Robin load balancing policy
• C. Recovery Manager Central policy
• D. virtual machine Restart policy

Answer: C

NEW QUESTION 18
An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described.
Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)

• A. Auto Deploy
• B. Single Sign-On
• C. Update Manager
• D. Lookup Service
• E. Certificate Authority

Answer: CD

NEW QUESTION 19
A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails. What must an integrator do to fix this problem?

• A. Install the snapshot agent on the operating system to enable online snapshot operations
• B. Select the “Force” checkbox to ignore the warning, and revert to the snapshot because this is a data volume
• C. Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools
• D. Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server

Answer: C

NEW QUESTION 20
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?

• A. It performs inline data efficiency processing and deduplication
• B. It provides very fast SSD capacity for demanding workloads
• C. It provides graphic acceleration for VDI infrastructure
• D. It accelerates CPU processing within a virtual machine

Answer: B

Explanation:
References:
https://assets.ext.hpe.com/is/content/hpedam/documents/a00026000-6999/a00026728/a00026728enw.pdf

NEW QUESTION 21
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

• A. Enable Remote Support and Insight Online Integration in the Composer UI
• B. Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
• C. Configure OneView with iLO Amplifier pack
• D. Activate iLO Federation on all installed compute nodes

Answer: C

NEW QUESTION 22
An integrator needs to configure a set of networks for Synergy compute nodes to send data to devices outside of a Synergy frame.
How should the integrator complete the task?

• A. Add the network to an interconnect bay within a Logical Enclosure (LE)
• B. Add the networks to an uplink set within a Logical Interconnect Group (LIG)
• C. Add the networks to an Enclosure Group (EG)
• D. Add the network sets to a Logical Interconnect Group (LIG)

Answer: A

NEW QUESTION 23
During an initial setup of a Synergy environment, an integrator needs to enable or disable authorized Service access.
What will be the outcome when the integrator disables this service?

• A. Authenticated administrators will be unable to make changes to the system
• B. Authorized users will be unable to generate a support dump
• C. Authenticated administrators will be unable to access the system
• D. Authorized support will be unable to diagnose the system

Answer: D

NEW QUESTION 24
......