NEW QUESTION 1
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?

• A. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
• B. A maximum of two switches can be used in an IRF stack when connecting storage.
• C. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
• D. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.

Answer: B

NEW QUESTION 2
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC)
configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new
AFC configuration?

• A. Remove flash cache for all VVS then run create Flash cache
• B. Increase current AFC configuration to reflect the additional space
• C. Remove the old AO configuration and recreate a new one
• D. Run tunesys after raising the AFC to take advantage of the additional space

Answer: A

NEW QUESTION 3
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)

• A. CIFS
• B. NTFS
• C. VFS
• D. ZFS
• E. NFS

Answer: AE

NEW QUESTION 4
You are designing a new HPE 3PAR StoreServ all-flash array for the customer.. Which ratio should you expect to have the highest efficiency?

• A. Read/write ratio
• B. Reclamation ratio
• C. Compaction Ratio
• D. Thin provisioning ratio

Answer: C

NEW QUESTION 5
A customer’s growing environment has a mix of HPE 3PAR StoreServ 8200 with 10K HDD, HPE 3PAR StoreServ 9450, and HPE 3PAR StoreServ 2080D with 3 tiers of storage deployed in the same data center. The customer needs to optimize performance by being able to move workloads to the most appropriate array as needed.
Which solution enables the customer to achieve this goal?

• A. HPE OneView to automate cpg migration based on user defined policies.
• B. HPE 3PAR Remote Copy in a Synchronous Long Distance topology.
• C. HPE Smart SAN to provide autonomic federated management.
• D. HPE 3PAR Peer Motion with SSMC to manage storage federation.

Answer: D

NEW QUESTION 6
A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?

• A. To easily move workloads to AWS or Azure in the event of site disaster.
• B. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR andStoreOnce.
• C. To regularly send backups to the cloud for the purposes of DR protection.
• D. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.

Answer: C

NEW QUESTION 7
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?

• A. Quality of services
• B. Enhanced group management
• C. Frame filtering
• D. Traffic isolation Zones

Answer: D

NEW QUESTION 8
What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

• A. The HPE DSM increases availability and reduces latency and throughput.
• B. The storage system, which holds a copy of the requested data, services the read I/Os.
• C. The iSCSI connections are blocked to non-critical nodes in the cluster by default.
• D. The storage system, which receives a copy of the data, does not service the write I/O.

Answer: B

NEW QUESTION 9
Match the HPE converged Strategy principle with its function

• A. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively
• B. Deduplication:-Reduce allocated capacity by eliminating data redundancy
• C. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
• D. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
• E. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.

Answer: E

NEW QUESTION 10
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

• A. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
• B. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
• C. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
• D. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.

Answer: A

NEW QUESTION 11
You are planning an upgrade to a customer’s existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?

• A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
• B. The MPIO service will do a failover, and the servers will continue to have access via two paths.
• C. Windows servers require host explorer is installed to ensure MPIO is unaffected.
• D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Answer: A

NEW QUESTION 12
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?

• A. Zero Detect
• B. Persistent Cache
• C. Express Indexing
• D. Express Writes

Answer: D

NEW QUESTION 13
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

• A. NinjaProtected
• B. NinjaStars
• C. NinjaCrawler
• D. StoreVista

Answer: B

NEW QUESTION 14
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?

• A. Express Writes
• B. Adaptive Flash Cache
• C. Thin provisioning
• D. Thin Deduplication

Answer: B

NEW QUESTION 15
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)

• A. HPE 3PAR Virtual Copy software
• B. HPE 3PAR Remote copy software
• C. HPE 3PAR Security software suite
• D. HPE 3PAR File persona Software suite
• E. HPE StoreOnce recovery manager central for VMware

Answer: AE

NEW QUESTION 16
A customer migrate their infrastructure from a 3rd party storage to a Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMVision?

• A. Nibmle service processor collects relevant per VM performance data and send them using SSL port 443 to VMvision
• B. VMvision is an agentless integration into infosight and needs only the Vcenter server appliance credentials to connec
• C. (page 112)
• D. VMware vSphere storage API’s array integration (VAAI)has to be configured to combine storage and VM performance metrics
• E. SNMP trap service has to be configured to send traps to infosight and integrate performance data using VMvision.

Answer: C

NEW QUESTION 17
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

• A. Store virtual Peer motion
• B. HPE 3PAR Remote Copy
• C. Recovery Manager central
• D. StoreServ Peer Motion

Answer: C

NEW QUESTION 18
Which statement describes HPE StoreVirtual Network RAID functionality?

• A. Redundancy is managed on a per-volume basis.
• B. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
• C. Network RAID 10 requires an even number of storage nodes.
• D. Volumes remain available if an odd number of nodes are available.

Answer: D

NEW QUESTION 19
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port–efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?

• A. Core-edge fabric
• B. Single switch fabric
• C. Cascaded fabric
• D. Meshed fabric

Answer: D

NEW QUESTION 20
Which value does a Nimble solution provide in addition to other HPE storage solutions?

• A. Flat support pricing for all hardware components
• B. Future-proofed for newer technologies
• C. All-inclusive software licensing over 5 years and additional capacity upgrades
• D. Upfront option for free controller upgrade after 3 years

Answer: B

NEW QUESTION 21
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?

• A. Rest API
• B. WMI
• C. SMI-S
• D. WEBEM

Answer: A

NEW QUESTION 22
......