NEW QUESTION 1

At which hierarchy would you configure a static MAC address for interface ge-0/0/0?

• A. [edit interfaces ge-0/0/0 unit 0]
• B. [edit interfaces ge-0/0/0]
• C. [edit interfaces ge-0/0/0 unit 0 family inet]
• D. [edit interfaces ge-0/0/0 unit 0 family inet address 172.25.11.2/24]

Answer: D

NEW QUESTION 2

Which two statements are true about static routes in the Junos OS (Choose Two)

• A. Static routes remain in the routing table until you remove them or until they become inactive
• B. Static routes are learned by neighboring devices and added to their routing tables
• C. Static routes are defined at the [edit routing-instance] hierarchy
• D. Static routes must have next hop defined

Answer: AD

NEW QUESTION 3

Which parameter would you use to prohibit the redistribution of a static route used for management traffic?

• A. no-readvertise
• B. discard
• C. reject
• D. passive

Answer: A

NEW QUESTION 4

You want to temporarily apply a candidate configuration to the active configuration and automatically roll back after 10 minutes
In this scenario, which command will accomplish this task?

• A. commit at
• B. commit confirmed
• C. commit check
• D. commit

Answer: B

Explanation:

[edit]
user@host# commit confirmed
commit confirmed will be automatically rolled back in 10 minutes unless confirmed commit complete
#commit confirmed will be rolled back in 10 minutes [edit]
user@host#
https://www.juniper.net/documentation/us/en/software/junos/cli/topics/topic-map/junos-configuration-commit.ht

NEW QUESTION 5

Which two keystrokes will auto-complete a command? (Choose two.)

• A. Esc
• B. Tab
• C. Spacebar
• D. End

Answer: BC

NEW QUESTION 6

What are two examples of transit traffic? (Choose two.)

• A. SFTP traffic that enter one interface and is destine for another interface on the local router.
• B. SCP traffic that enters one interface and exit another interface on the local router.
• C. SFTP traffic that enters and exits the same interface on the local router.
• D. SCP traffic that is destined for the router's loopback interface.

Answer: BC

NEW QUESTION 7

You issue a "request system zeroize" command. Which statement is correct in this scenario?

• A. All data files remain unchanged but all configuration settings returned to factory defaults.
• B. All data files are deleted and all configuration settings are returned to factory defaults.
• C. All data files are deleted and all configuration settings remain unchanged
• D. Disk space is freed by rotating log files and a proposed list of files to be deleted is presented.

Answer: B

NEW QUESTION 8


Referring to the exhibit, what does the number inside the square brackets represent?

• A. local preference
• B. metric
• C. protocol reference number
• D. route preference

Answer: B

NEW QUESTION 9

The IP address 10.1.1.1 belongs to which class of IP address space?

• A. Class A
• B. Class B
• C. Class C
• D. Class D

Answer: A

NEW QUESTION 10

You have entered the command "show log messages | match "error | kernel | panic" which statement is correct regarding the keywords error, kernel and panic in the output?

• A. the output messages will contain all messages from the file except the ones that contain allthree defined keywords.
• B. the output messages will contain all messages from the file that contains all three defined Keywords
• C. the output messages will contain all messages from the file that contains at least one of the three defined keywords
• D. the output messages will contain all messages from the file except the ones that contains at least one of the three defined keywords

Answer: B

NEW QUESTION 11

Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

• A. The memory utilization is 28%
• B. The memory utilization is 72%
• C. The CPU kernel utilization is 1%
• D. The 15 minute CPU load average is 99%

Answer: AC

NEW QUESTION 12

Referring to the exhibit.

which action would synchronize a new router's clock with the NTP Server? Or
Which action would synchronize the local router's clock with the NTP server?

• A. Reboot the router.
• B. Configure the NTP server using the set server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
• C. Configure the correct NTP trusted kay using the set trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
• D. Issue the set date ntp operational

Answer: D

NEW QUESTION 13

Which two keystrokes are used to auto-complete commands? (Choose two.)

• A. Spacebar
• B. Esc
• C. Tab
• D. End

Answer: AC

NEW QUESTION 14

Click the Exhibit button.

Referring to the exhibit, which command was issued to generate the output?

• A. show chassis routing-engine
• B. show chassis hardware
• C. show chassis environment
• D. show chassis fpc

Answer: B

NEW QUESTION 15

Which two statements describe PFE functions are true?

• A. The PFE implements rate limiting using policers
• B. The PFE stores the master copy of the layer 2 and layer 3 forwarding tables
• C. The PFE provides access to the CLI and Jweb
• D. The PFE stores a local copy of the layer 2 and layer 3 forwarding tables

Answer: AD

NEW QUESTION 16

What is the purpose of the load merge command?

• A. to add or delete variables from the configuration based on the contents of a specified path file.
• B. to completely overwrite the current configuration with the configuration you load.
• C. to combine the current configuration with the configuration you load.
• D. to look for a replace tag in the configuration you load.

Answer: C

NEW QUESTION 17

Which command is used to validate the syntax of a configuration without applying the
configuration?

• A. commit check
• B. commit confirmed
• C. commit synchronize
• D. commit and-quit

Answer: A

NEW QUESTION 18

Which two statements about exception traffic processing are correct? (Choose two.)

• A. When congestion occurs, only exception traffic is given preference.
• B. By default, a rate-limiter for exception traffic exists on the internal link between the control plane and the forwarding plane
• C. When congestion occurs, local and control traffic are given preference.
• D. By default, no rate-limiter for exception traffic exists on the internal link between the control plane and the forwarding plane.

Answer: BC

NEW QUESTION 19

You are troubleshooting an issue and want to monitor syslog in real time. Which operational command accomplishes this task?

• A. show log messages | refresh 1
• B. monitor traffic interface fxp0.0
• C. monitor start messages
• D. show log messages

Answer: C

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/monitor-start.html

NEW QUESTION 20
......