NEW QUESTION 1
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)

• A. system node autosupport history show
• B. system node autosupport check show
• C. system node autosupport destination show
• D. system node autosupport invoke

Answer: AB

NEW QUESTION 2
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 3
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP
System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

• A. Cloud Manager
• B. ONTAP System Manager
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

NEW QUESTION 4
Click the Exhibit button.

A customer wants to replace their ONTAP cluster CN1610 switches with Cisco Nexus 3132Q-V
switches. They want to perform a non-disruptive upgrade.
Referring to the exhibit, which cable will be required to non-disruptively migrate to the new
switches?

• A. a 10GbE SFP+ to SFP+ cable
• B. a 100GbE QSFP28+ to 4x25GbE SFP28+ cable
• C. a 40GbE QSFP+ to QSFP+ cable
• D. a 40GbE QSFP+ to 4x10GbE SFP+ cable

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

NEW QUESTION 5
YouareusingBroadcomBES-53248switchesforaclusterinterconnectinabaseconfiguration. In
thisscenario,whatistheminimumnumberofISLssupportedbetweentheswitches?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systemsswitches/pdfs/sidebar/BES_53248_Switches.pdf (3)

NEW QUESTION 6
Which two functions does the management network provide? (Choose two.)

• A. to provide access to the system console of any node in the cluster
• B. to collect diag log files
• C. to replicate the cluster configuration to all nodes
• D. to transfer SVMs between the cluster nodes

Answer: AB

NEW QUESTION 7
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

• A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
• B. The LIFs must use the default intercluster service policy.
• C. The LIFs must be in dedicated broadcast domains an IPspaces.
• D. At least one LIF per node is required on each cluster.

Answer: BC

NEW QUESTION 8
Click the Exhibit button.

Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The
customer asks how many ports can be used for the Ethernet host connections.
In this scenario, what would you tell the customer?

• A. 4
• B. 8
• C. 10
• D. 12

Answer: D

NEW QUESTION 9
Which logical interface has a fixed firewall policy?

• A. data LIF
• B. cluster management LIF
• C. cluster LIF
• D. intercluster LIF

Answer: C

Explanation:
Reference: https://docs.netapp.com/usen/
ontap/networking/configure_firewall_policies_for_lifs.html#create-a-firewall-policy-andassigning-
it-to-a-lif

NEW QUESTION 10
You have a 2-node FAS8300 switchless ONTAP 9.8 clusterthatserves NAS volumes. You have a data
SVMthat connectstothe network usingmultimodeLACPwithVLANtags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?

• A. a0a
• B. e0e
• C. e0e-100
• D. a0a-100

Answer: B

Explanation:
Reference: https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx

NEW QUESTION 11
An administrator issued the cluster setup command and configured a 2-node ONTAP 9.8 cluster.
In this scenario, which tool would the administrator use to validate the configuration?

• A. Active IQ Upgrade Advisor
• B. Interoperability Matrix Tool
• C. NetAppDocs
• D. Active IQ Config Advisor

Answer: C

NEW QUESTION 12
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

• A. port sets
• B. switch zoning
• C. reporting nodes
• D. failover groups

Answer: AD

NEW QUESTION 13
You are preparing to physically install a new AFF A400 cluster into a customer’ sracks. All equipment
Has been delivered to the customer’s site.
Which three tools do you need to complete this installation? (Choose three.)

• A. additional network cables
• B. Phillips #2 screwdriver
• C. laptop computer
• D. slide railkit
• E. cable management tray

Answer: ABC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a400/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 14
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

• A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the dailytasks and provide input and output examples.
• B. If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
• C. The answers to any of your questions can be found on the NetApp SmartSolve site(http://smartsolve.netapp.com).
• D. You should open a case with NetApp Support for all future questions with low priority and include thekeyword "Training" in the title.

Answer: AC

NEW QUESTION 15
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp. You use the
autosupport history show command and see the output shown in the exhibit. The customer confirms that the AutoSupport settings are correct.

Which two actions will solve this issue? (Choose two.)

• A. The customer needs to enable AutoSupport for both nodes.
• B. The customer needs to exclude the two nodes from the attachment-size limitation.
• C. The customer needs to change the transport protocol to HTTP.
• D. The customer needs to white-list the two nodes on their mail server.

Answer: AC

NEW QUESTION 16
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?

• A. IQNs
• B. WWNNs
• C. WWPNs
• D. host names

Answer: D

NEW QUESTION 17
......