NEW QUESTION 1
Cisco TelePresence Video Communication Servers can be clustered to provide resiliency in the enterprise. What is the maximum number of cluster members?

• A. 2
• B. 3
• C. 6
• D. 7
• E. 15

Answer: C

NEW QUESTION 2
Endpoints for immersive telepresence: (Choose three.)

• A. CTS 3000
• B. TX 9000
• C. EX 90
• D. SX 10
• E. T3
• F. Jabber

Answer: ABE

NEW QUESTION 3
How many participants if you have 20 licenses screen?

• A. 1
• B. 5
• C. 10
• D. 20
• E. 40

Answer: D

NEW QUESTION 4
Which three features does Cisco VCS provide? (Choose three.)

• A. native Cisco SCCP telephony integration
• B. SIP-H.323 interworking functionality
• C. native scheduling
• D. SIP trunk integration with Cisco Unified Communications Manager
• E. third-party standards-based H.323 and SIP device registration
• F. reverse proxy functionality

Answer: BDE

NEW QUESTION 5
Endpoint for immersive telepresence:

• A. EX 90
• B. TX 9000
• C. SX 10
• D. DX 70

Answer: B

NEW QUESTION 6
What is the correct order of steps to schedule a One Button to Push conference call between a Cisco TelePresence System 500 and a Cisco TelePresence Codec C40?

• A. Configure the One Button to Push field under device configuration for the Cisco TelePresence System 500 and Codec C40.
• B. Configure One Button to Push under Cisco TelePresence Video Communications Server > Applications > OBTP Configuration.
• C. Configure a new conference under Cisco TelePresence Management Suite > Booking New Conference > Type.
• D. The One Button to Push feature cannot be configured without a scheduling plug-in application such as Microsoft Outlook.
• E. Configure the Scheduler tool in the Cisco TelePresence Management Suite.

Answer: C

NEW QUESTION 7
Which CLI command must the engineer run on the SX20 to verify its registration status?

• A. xCommand
• B. xStatus
• C. xConfiguration
• D. xEvent

Answer: B

NEW QUESTION 8
A conference has been scheduled two hours in advance. When does Cisco TelePresence Management Suite run diagnostics for system tickets that can affect the conference setup?

• A. 15 minutes prior to the scheduled start time
• B. 1 minute prior to the scheduled start time
• C. 10 minutes prior to the scheduled start time
• D. 5 minutes prior to the scheduled start time

Answer: A

NEW QUESTION 9
Which protocol does the Cisco TelePresence Content Server use for call signaling?

• A. MGCP
• B. Cisco Proprietary
• C. SCCP
• D. H.323

Answer: D

NEW QUESTION 10
An end user reports that the video they are receiving from a CTS-500 is showing a heavy blue tint. The room sending the video uses indoor artificial lighting. Which procedure must be performed to resolve the issue?

• A. camera focus balance calibration
• B. camera brightness mode: indoor
• C. camera auto adjustment
• D. camera auto adjust room environment
• E. camera temperature map adjustment

Answer: C

NEW QUESTION 11
What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

• A. Option 150 is not important.
• B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.
• C. It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to.
• D. It is the configured SIP registrar and proxy server.
• E. It is the unique NTP server IPv4 address.

Answer: B

NEW QUESTION 12
What is the proper procedure to manually reset a password on a Cisco TelePresence EX Series endpoint running software version TC7?

• A. Use SSH to access the device and use the username "cisco" and the password "TANDBERG."
• B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch screen.
• C. When the device is powered down, hold down the power button until the power light blinks twice, then press the power button twice.
• D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP address.
• E. Tap the power button five times while the device is powered off and when it boots, use Telnet to connect to the device within 60 seconds.

Answer: C

NEW QUESTION 13
Which codec is most suitable for a video streaming solution?

• A. AAC-LD
• B. G.729
• C. H.264
• D. G.711

Answer: C

NEW QUESTION 14
Which function does FECC provide?

• A. the ability to transfer calls between the SIP and H.323 protocols
• B. the ability to pan, tilt, and zoom the camera at the far end
• C. the ability to switch between content channels
• D. the ability to send DTMF tones

Answer: B

Explanation: Topic 3, Troubleshooting and Support

NEW QUESTION 15
Which four features are provided by Cisco TelePresence Management Suite? (Choose four.)

• A. Scheduling of video conference calls
• B. Built-in-bridge functionality for multiparty video conferences
• C. SIP-H.323 protocol interworking
• D. Centralized management of conference resources
• E. SMTP email event notification
• F. Endpoint configuration backup and restore
• G. Cisco TelePresence endpoint automated redundancy
• H. Automated resource optimization

Answer: ADEF

NEW QUESTION 16
Refer to the exhibit.

Which option performs a factory reset of a Cisco TelePresence System endpoint?

• A. Configuration > System Settings
• B. Configuration > Security Settings
• C. Troubleshooting > Hardware setup
• D. Monitoring
• E. Troubleshooting > Configuration Issues
• F. Troubleshooting > System Restart
• G. ACisco TelePresence System endpoint can be reset only via CLI.

Answer: E

NEW QUESTION 17
Which Cisco MCU feature allows a video participant to dial in to view permanent and active conferences and select a conference to join, or allow them to create a new conference?

• A. ad hoc conferencing
• B. ACD
• C. Auto Attendant
• D. preconfigured participant

Answer: C

NEW QUESTION 18
A manager requires multiparty video meetings with presentation capability. Which endpoint meets the requirement assuming there is no centralized bridge?

• A. Cisco SX20
• B. Cisco DX650
• C. Cisco 7800
• D. Cisco Jabber

Answer: D

Explanation: https://www.bluejeans.com/video-conferencing/cisco-telepresence