NEW QUESTION 1
Which description of a hybrid SDN framework is true?

• A. The control plane function is split between a SDN controller and the networking element
• B. The control plane and data plane are pulled from the networking element and put in an SDN controller and SDN agent
• C. The data plane is pulled from the networking element and put in an SDN controller
• D. The control plane is pulled from networking element and put in an SDN controller

Answer: A

NEW QUESTION 2
Which option lists key Cisco TrustSec architecture components?

• A. permit,deny,log
• B. classify,mark,deny
• C. authentication,authorization,access control
• D. identity,enforcement,authentication

Answer: C

NEW QUESTION 3
Which four options are part of Cisco ONE Enterprise Cloud Suite product portfolio? (Choosefour)

• A. Cisco Intercloud Fabric for Business
• B. Cisco Virtual Application Container Services
• C. Application Policy Infrastructure Controller
• D. Cisco Open SDN Controller
• E. Cisco Prime Service Catalog
• F. Cisco UCS Director
• G. Cisco WAAS
• H. Cisco ASA

Answer: ABEF

NEW QUESTION 4
Which two Layer 4 – Layer 7 parameters are needed to do route peering with a Layer 4 – Layer 7
service device in Cisco ACI? (Choose two)

• A. Under the device interface, the L3 out must be selected
• B. A valid router configuration must be set under the service graph template
• C. Under the device interface, the path must be selected
• D. A router ID must be assigned under the Layer 4-Layer 7 device
• E. The connector type must be set to “Layer 2 Peering”

Answer: CD

NEW QUESTION 5
Refer to the exhibit.

Your application has a reduced health score.Upon inspection, you find a fault that impacts the health
score. The fault currently is in the soaking lifecycle stare. Which two options are possible next steps while in this state? (Choose two)

• A. Acknowledge the fault, which immediately clears it from the system
• B. Once the soaking timer expires the fault ceases and no change is expected in sevenitylevel.
• C. The condition ceases by itself and goes into the soaking-clearing state
• D. The condition ceases by itself and automatically clears the fault
• E. The soaking timer expires and moves to the Raised sevenitylevel

Answer: CE

NEW QUESTION 6
Assume that ucsd-dcloud cisco.com is the correct address of the cisco UCS Director server.Which two
options are prerequistes to access the cisco UCS Director REST API interface? (choose two)

• A. Run the dbgtoken utility and ask TAC to generate a response cookie
• B. Submit the usemame/password to http://ucsd-dcloud cisco.com/api/access to obtain session cookie
• C. Obtain the REST API Access Key code for the User Information dialog box
• D. Obtain the developer token from cisco Devnet
• E. Enable the Developer menu on the Adcanced tab of the User Information dalogbox

Answer: CE

NEW QUESTION 7
Refer to the exhibit.

Which two statements are true? (Choose two)

• A. The option failover is enabled on all the interfaces
• B. Interface vfc 1871 is pinned to fc interface 1/32 in fabric interconnectB
• C. Server 7 in chassis 4 has been associated with profile circuit
• D. To check the MAC address from server 7/4 interface eth 10. you can check the MAC addresses learned on veth 1866 on fabric interconnect B
• E. The server has total of six vNICs.

Answer: DE

NEW QUESTION 8
Refer to the exhibit.

Using which method is the host with MAC address (002 a.6a5c.0d44) learned?

• A. remote router running NVE
• B. remote FabricPath node
• C. remote VTEP
• D. local SVI
• E. local physical port

Answer: C

NEW QUESTION 9
Which two options are best practices when registering Cisco UCS Manager to UCS Central? (Choose
two.)

• A. Use an IP address for UCS Domain when registering.
• B. Ensure that NTP is configured on the UCS Domain and UCS Central.
• C. Ensure that the UCS Domain and UCS Central are in the same Layer 2 domain.
• D. Use a fully qualified domain name for UCS Domain.
• E. Ensure that the independent local time source is used for UCS Domain and UCS Central.

Answer: BD

NEW QUESTION 10
Refer to the exhibit.

Which two options must be configured on the Layer 3 Gateway switches to isolate the HSRP between the two data centers? ( Choose two)

• A. disable HSRP GARP on the SVIs for the VLANs that move across the DCI
• B. routed access control list on the DCI on the SVIs that blocks the HSRP control traffic
• C. port access control list on the DCI port-channel that blocks the HSRP control traffic
• D. VLAN access control list that blocks the HSRP control traffic
• E. ARP inspection filter that blocks the HSRP GARPs

Answer: DE

Explanation: https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/118934-configure-nx7k-00.html#anc12

NEW QUESTION 11
Which two statements about the physical leaf interface configuration are true? (Choose two)

• A. The port usage type is "Blacklist” by default
• B. When not configured, the default AEP information displayed on an interface defaults to the system-defined AEP
• C. A port connected to an APIC has usage type of EP
• D. Infra, and Controller
• E. Auto Mdix mode detects the cable connection type and configures the connection appropriately
• F. The administrative port layer state can be Switched, Routed, or P2P

Answer: BD

NEW QUESTION 12
Refer to the exhibit.

If you inspect a VXLAN packet at point 2, which two options about the outer fields in the VXLAN
header are true? (Choose 2)

• A. Outer S-MAC = MAC-A ; Outer D-MAC = MAC~B
• B. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-4
• C. Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-2
• D. Outer S-|P = IP-1; Outer D-IP = IP-4
• E. Outer S-IP = IP-1; Outer D-IP = IP-2.

Answer: CD

NEW QUESTION 13
Refer to exhibit.

Which two statements about this command are true? (Choose two)

• A. The command is usually used FCIP over the overlay
• B. The command is used to extend the spanning tree for VLAN 72 across the overlay
• C. The command is used to enable unknown unicast flooding for a known MAC address across the overlay
• D. The command is used in HSRP localization for OTV
• E. The command is usually used for Microsoft network load balancing implementation

Answer: CE

NEW QUESTION 14
Refer to the exhibit.

Which statement about VPC member ports on this switch is true?

• A. VPC port status remains unchanged
• B. VPC ports are error disabled
• C. Only orphan ports stay operational
• D. VPC ports are suspended

Answer: A

NEW QUESTION 15
Which technology, implemented on aggregation-edge nodes at the aggregation layer, provides per-
tenant isolation at Layer 3, with separate dedicated per-tenant routing and forwarding tables on the inside interfaces of firewall contexts?

• A. VDC
• B. VRF-lite
• C. VXLAN
• D. VLAN

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/VMDC/2-2/design_guide/vmdcDesign22/VMDC_2-2_DG_2.html

NEW QUESTION 16
Which feature is required for Dynamic ARP Inspection?

• A. DIA
• B. First-hop-security
• C. DHCP
• D. ARP

Answer: C

NEW QUESTION 17
Which two options are valid span configurations for a Cisco Nexus 1000 series Switch? (Choose2)

• A. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-4 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/2
• B. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 3/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/5
• C. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 3/1 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 3/2
• D. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 3/5
• E. N1000v(config)#monitor session 3N1000v(config-monitor)# source interface Ethernet 2/1-3 N1000v(config-monitor)# source interface vlan 3,6-8 tx N1000v(config-monitor)# filter vlan 3-5,7N1000v(config-monitor)# destinaiton interface Ethernet 2/5

Answer: CE