NEW QUESTION 1
Refer to the exhibit.

An administrator must configure a SAN port channel between a cisco UCS and a MDS switch as
shown in the exhibit.
The UCS fabric interconnects are in FC switch mode.The administrator creates a port channel on the MDS switches with the configuration.After, which configuration change is needed to bring up the port channel?

• A. Cisco UCS port configured as storage
• B. Cisco UCS port configured as FCoE uplink
• C. feature npv configured on MDS
• D. switchport mode E on the port-channel interface
• E. switchport mode NP on the port-channel interface
• F. feature port-channel configured on mds

Answer: D

NEW QUESTION 2
DRAG DROP
Drag and drop the term about BFD session parameters from the left onto the correct definition on the right?

Answer:

Explanation:

NEW QUESTION 3
Which option is a data modeling language used to model configuration and state data of network elements?

• A. NETCONF
• B. SNMPv4
• C. YANG
• D. RESTCONF

Answer: C

NEW QUESTION 4
DRAG DROP
Drag and drop the VTP mode from left onto the correct description on the right.

Answer:

Explanation: Transparent – relays all VTP protocol packets that it receives o trunk port to all other trunk ports
dServer – creates, removes and modifies VLANs over the entire network
Client – cannot create, change or delete VLANs
Off – Does not forward any VTP packets

NEW QUESTION 5
How many APICs can you communicate with at one time in a single REST call using Postman?

• A. three
• B. two
• C. one
• D. There is notlimit

Answer: D

NEW QUESTION 6
When the administrator uses the commit command to activate the changes to the call homeconfiguration, it results in an error. Which statement is true?

• A. Cisco Fabric Services must be disabled for this command to work.
• B. The commit callhome command must be used.
• C. Cisco Fabric Services must be enabled for this command to work.
• D. The commit command is not required.

Answer: C

NEW QUESTION 7
How does FabricPath build loop-free topologies for multidestination traffic?

• A. FabricPath uses spanning-tree inside the fabricPath network to prevent loops.
• B. FabricPath uses forwarding tags to ensure a encapsulate Ethernet traffic in IP multicast packet.
• C. FabricPath uses multicast groups to encapsulate Ethernet traffic in IP multicast packet.
• D. FabricPath cannot have loops and does not need to rely any logic to prevent them

Answer: B

NEW QUESTION 8
Refer to the exhibit.

A virtual machine in the EPG "Clients" is unable to communicate via ICMP with a virtual machine in the EPG "Server". Which option is the most likely cause of this issues?

• A. The EPG "Server" is providing the relevant contract but the EPG "Clients" is not consuming the contract
• B. Not enough detail is provided in the output to determine the exact cause
• C. There is no issue because the configured rules permit ICMP traffic
• D. No contract is configured between the two EPGs

Answer: D

NEW QUESTION 9
A user wants to allow VLANs 1-3967 on a pure Layer 2 FabricPath spine with the least amount of configuration required. Which configuration is correct?

• A. Vlan3967 mode fabric pathInterface eth(fabricpath core interface) switchport mode fabricpath
• B. Vlan 1mode fabricpath fabncpath mode transit
• C. Vlan 1-3967mode fabricpathInterface eth(fabricpath core interface) switchport mode fabncpath
• D. Vlan 1-3967Interface eth( fabricpath core interface) switchport mode trunkswitchport trunk allowed vlan all

Answer: C

NEW QUESTION 10
Which two statements about the configuration of APIC in the ACL Fabric are true?

• A. Cluster controllers added to the APIC be running the same version ot firmware
• B. When performing planned changes to the cluster, at least one controller in the cluster must be healthy
• C. Commissioning an APIC can be done via the APIC IU, but decommissioning an APIC must be done using CLI
• D. An APIC cluster is comprised of multiple controllers that provide monitoring, diagnostic, and confiquration capability
• E. APIC cluster size is set during the initial setup stri
• F. And after it configured it requiresa nondisruptive re-initialization of the APIC cluster to change

Answer: AD

NEW QUESTION 11
Which configuration step is needed is Cisco UCS Director to enable an option to metadata reportand
REST API Browser for developers?

• A. Enable the debugging menu
• B. Enable the REST API
• C. Enable the developer menu
• D. Enable report metadata

Answer: C

NEW QUESTION 12
You must send an email after Cisco UCS Director completes a particular operation. Which two steps
to implement this functionality are most appropriate? (Choose two.)

• A. Use WebSockets and subscribe to events from Cisco UCS Director.
• B. Configure Mail Setup in Cisco UCS Director Administration > System settings.
• C. Implement Python code in the workflow to send an email.
• D. Use Cloupia Script to send an email.
• E. Write the appropriate method in XML and pass the email parameters to it.

Answer: BD

NEW QUESTION 13
Refer to the exhibit.

When specifying subnets under a bridge domain for a given tenant the user can specify the scope of a subnet. Which definition of the public subnet scope is true?

• A. It indicates that this subnet is advertised to public Internet and must protected by a firewall
• B. It indicates that it must be leaked m one or more private networks within ACI fabric
• C. It indicates that this subnet is advertised to the border leaf in ACI fabric
• D. It indicates that this subnet is advertised to the external router by the border leaf

Answer: D

NEW QUESTION 14
What is the correct location where the DPDK libraries run?

• A. User space
• B. Network Space
• C. Kernel Space
• D. Disk Space

Answer: A

NEW QUESTION 15
You are configuring an L3Out interface for a VRF for which OSPF is configured on an ACI fabric.You notice that the OSPF routing table is rebuilt every 10 seconds. Which reason for this behavior is true?

• A. OSPF timers are set to rebuild the RIB every 10 seconds
• B. The loopback interfaces of the L3Out are configured with an IP addresses that is already in use
• C. Aduplex mismatch is on the link on which L3Out is configured
• D. This is the normal behavior of the ACI fabric

Answer: B

NEW QUESTION 16
Refer to the exhibit.

An admin wants to bring online a new leaf node into their ACI fabric. Before registering the leaf node, the admin checks the current status arid sees this output.
Which option is the reason for the admin to see this output?

• A. The wrong catalog firmware is running on the APIC.
• B. This output is expected until the admin registers the leaf node and assigns it a role.
• C. The leaf node is yet to be physical connected to the fabric.
• D. The DHCP server running on the APIC has failed and thus the leaf node has not been able to obtain an IP address.
• E. This output is expected until the admin registers the leaf node with an ID and name.

Answer: E

NEW QUESTION 17
DRAG DROP
Drag and drop the spanning-tree port from the left onto the correct description on the right.

Answer:

Explanation: