NEW QUESTION 1
An administrator is replacing an IOM. The failed IOM is in chassis 1 and was connected to FI-B. the replacement IOM has an older version of software to the fabric interconnect. Which description is the correct process to bring the replacement IOM into the environment?

• A. Install the replacement IOM and connect a single cabl
• B. Monitor the software auto-upgrade using the show fexdetall command from Cisco NX OS CL
• C. Connect the remaining cables when the upgrade is complete.
• D. Install replacement IOM and connect all cable
• E. Monitor the software auto-upgrade using the show fex detall command from Cisco NX OS CLI.
• F. Downgrade the fabric interconnect to match the IOM versio
• G. Connect all cables and bring the IOM onlin
• H. Upgrade the fabric interconnect and IOM to match the system.
• I. Install the replacement IOM and connect a single cabl
• J. Perform a firmware update of IOM, then activate with the matching code for fabric interconnect Reackonwledge the chassis.
• K. Decommission the chassi
• L. Install the replacement IOM and connect all cable
• M. Perform a firmware update of IOM the activate with the matching code for the fabric interconnect Reackonwledge the chassis.

Answer: B

NEW QUESTION 2
Which two statements about UCS switch mode are true? (Choose two)

• A. Disjoint Layer 2 networks are supported only when the Ethernet switching mode of the fabric interconnects is configured for switch mode.
• B. Switch mode is the default Ethernet switching mode.
• C. Broadcast packets flood out of all ports except the port that it was received on.
• D. Server-to-server multicast and broadcast traffic is sent through all uplink ports in the same VLAN.
• E. Ethernet switching mode must be used only if the fabric interconnect is connected directly to a router.

Answer: CD

NEW QUESTION 3
You are integrating Layer 4 - Layer 7 devices in a Cisco Application Centric Infrastructure deployment. Which option allows you to define a preset of policies to deploy when applying a service graph template?

• A. application profile
• B. service groups
• C. function profile
• D. policy groups

Answer: C

NEW QUESTION 4
Which IETF standard is the most efficient messaging protocol used in anloT network?

• A. SNMP
• B. HTTP
• C. CoAP
• D. MQTT

Answer: C

NEW QUESTION 5
In a multiple vendor environment,which approach is recommended in cisco NX-OS to generate the BGP router distinguisher and router target?

• A. Manually configure router-distinguisher and auto generate rouer-tarfet values
• B. Manually configure router-distinguisher and route-target values
• C. Auto generate route-distinguisher and route-target values
• D. Auto generate route-distinguisher and route-target values and make manual adjustments

Answer: B

NEW QUESTION 6
Which option must be configured before IP Source Guard is used successfully in your networkenvironment?

• A. Dynamic ARP inspection
• B. DHCP snooping
• C. port security
• D. dot1tx

Answer: B

NEW QUESTION 7
Which description of how to enable the Flex Flash Controller auto-sync function on the B200M4 blade is true?

• A. Configure a storage policy for FX3S
• B. Configure a storage connection policy to use auto-sync
• C. Configure a local disk policy for FlexFlash
• D. Enable auto-sync in the servers > inventory > storage subtab

Answer: D

Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/b_UCSM_GUI_Storage_Management_Guide_3_ 1_chapter_01011.pdf

NEW QUESTION 8
Which two statements about import and export route control in an ACI fabric are true? (Choose two.)

• A. Prefixes learned from OSPF/EIGRP L30urs are never permitted inbound by default.
• B. Prefixes learned from BGP L3outs cannot be filtered inbound.
• C. Export route control controls if the prefixes are redistributed from MP-BGP to the egress leaf.
• D. Prefixes permitted inbound are redistributed into MP-BGP at the ingress leaf.

Answer: CD

NEW QUESTION 9
Refer to the exhibit

When configuring enhanced vPC for a dual-home server, where vPC port-channel command must be configured?

• A. A, B and C
• B. vPC configyuration is not required when using dual-home FEX
• C. C only
• D. A and b

Answer: A

NEW QUESTION 10
DRAG DROP
Drag and drop the Spanning Tree protocol standards from left onto the correct characteristics on the right

Answer:

Explanation:

NEW QUESTION 11
Which four types of tables does Cisco vPathmaintain?Which are crucial for its operations toclassify
and redirect traffic flows to enforce service policies?

• A. service table
• B. forwarding table
• C. flow table
• D. adjacency table
• E. group table
• F. path table
• G. service node table
• H. MAC table

Answer: ACFG

NEW QUESTION 12
To test the API in a web browser, which commands must you configure to enable the feature API
sandbox on the Cisco Nexus platform running NX-OS?

• A. switch(config)# feature nxos-api switch(config)# nxos-api sandbox
• B. switch(config)# feature api switch(config)# api sandbox
• C. switch(config)# feature nx-api switch(config)# nx-api sandbox
• D. switch(config)# feature nxapi switch(config)# nxapi sandbox

Answer: D

NEW QUESTION 13
Which two statements about the Cisco Fibre Channel Domain feature and persistent FC IDs are true? (Choose two.)

• A. A persistent FC ID that is assigned to an F Port cannot be moved across interfaces if the same persistent FC ID is to be maintained.
• B. When persistent FC IDs are enabled, FC IDs cannot be changed after a reboot.
• C. If you connect to the switch from a Windows host, be sure to enable the persistent FC ID feature in the VSAN that connects these hosts.
• D. The current FC IDs in use in the fcdomain are saved across reboots.
• E. Entries that the switch has learned must be manually acknowledged to be stored in the FCDomain FCID database.

Answer: BD

NEW QUESTION 14
How do you manually configure a vNIC MAC address?

• A. Modify the adapter policy
• B. Use the set identity dynamic-mac command
• C. Modify the dynamic vNIC connection policy
• D. Use the mac-address-table static command

Answer: B

NEW QUESTION 15
Which three options are SDN Southbound protocols? (Choose three)

• A. API
• B. OVSDB
• C. OpenFlow
• D. Puppet
• E. PCEP
• F. VXLAN

Answer: BCE

NEW QUESTION 16
DRAG DROP
Drag and drop the feature on the left to their correct benefit on the right

Answer:

Explanation: A goes to C
B goes to D
C goes to A
D goes to B

NEW QUESTION 17
Which two statements about VLAN Trunking Protocol are true? (Choose 2)

• A. VIAN Trunking Protocol is a Layer 2 messaging protocol that maintains VLAN consistency by managing the addition, deletion, and renaming of VLANs within a VLAN Trunking Protocol domain.
• B. On Cisco Nexus switches, VLAN Trunking Protocol is enabled by default.
• C. Layer 2 trunk interfaces, Layer 2 port channels, and virtual port channels support VLAN Trunking Protocol functionality.
• D. VLAN Trunking Protocol is only supported on Layer 2 trunk interfaces.
• E. VLAN Trunking Protocol is a Layer 2 messaging protocol that maintains the interface VLAN configuring within a VLAN Trunking Protocol domain.

Answer: AC