NEW QUESTION 1
Which option is the common primary use case for tools such as Puppet, Chef, Ansible, and Salt?

• A. Policy assurance
• B. network function virtualization
• C. network orchestration
• D. configuration management

Answer: D

NEW QUESTION 2
Which description of how to enable DIMM blacklisting is true?

• A. Enable blacklisting in the servers > policy subtab
• B. Enable blacklisting in the servers inventory > memory subtab
• C. Configure a memory policy under the services tab
• D. Configure a memory policy in the equipment > policy subtab

Answer: A

NEW QUESTION 3
Refer to the exhibit.

After you upgrade Cisco UCS firmware, some of your blades have these error messages. Which description of the problem is true?

• A. Storage provisioning is not configured
• B. Some components are deprecated
• C. vNIC template must be converted to updating
• D. Service profile requires a connectivity policy

Answer: D

NEW QUESTION 4
Which option is required by atomic counters to be leveraged in troubleshooting endpoint connectivity?

• A. Endpoints must be in different endpoint groups
• B. Endpoints must connect to different leaf switches
• C. Endpoints must connect to the same leaf switch
• D. Endpoints must be in different VRFs
• E. Endpoints must be in different bridge domains

Answer: B

NEW QUESTION 5
The local service profiles in Cisco UCS Manager refer to global ID pools, but the IDs are not allocated.Which two tasks must be completed when checking Cisco UCS Central and/or Cisco UCS Manager? (Choose two)

• A. Verify that the registered Cisco UCS domain is not in a lost visibility or suspended state
• B. Make sure that the local pools contain enough IDs
• C. Make sure that the global pools contain enough IDs
• D. Ensure that global pools with the same name exist with available IDs
• E. Ensure that local pools with the same name exist with available IDs

Answer: AC

NEW QUESTION 6
Which statement about supportability with ITD is true?

• A. Up to 128 ACE enties are supported
• B. Deny ACE enties are supported
• C. ITD is supported on fabric extenders
• D. Weighted load balancing is supported

Answer: D

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/itd/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_Intelligent_Traffic_Director_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_Intelligent_Traffic_Director_Configuration_Guide_7x_chapter_010.html#concept_1AE89B98882646F492786590EAA85F70

NEW QUESTION 7
Which option is the best practice recommendation for Spanning Tree configuration in a vPC environment?

• A. Disable PortFast (edge port type) on host-facing interfaces to avoid slow STP convergence
• B. Disable Rapid PVST or MST on all switches in the Layer 2 domain to avoid slow STP convergence
• C. Disable the Bridge Assurance feature on vPC links
• D. Disable the BPDU Filter on the edge devices to avoid BPDU propagation

Answer: C

NEW QUESTION 8
Refer to the exhibit.

You have been investigating an issue with your Cisco UCS blade booting from remote Fibre Channel storage. Upon inspection, you see the output in the exhibit. Which two statements are true? (Choose two)

• A. FC_ID 0x5e01ef is that of the storage array
• B. FC_ID 0x5e003c is that of the HBA
• C. FC_ID 0x5e003c is that of the MDS or Cisco Nexus 5000 Series Switch
• D. FC_ID 0x5e003c is that of the storage array
• E. FC_ID 0x5e01ef is that of the MDS or Cisco Nexus 5000 Series Switch

Answer: AB

Explanation: https://nicholasgerasimatos.wordpress.com/2014/01/10/cisco-ucs-boot-from-santroubleshooting/

NEW QUESTION 9
How is the virtual IP for an ACI VPC domain assigned?

• A. No virtual IP is available for VPC peers on ACI
• B. by DHCP using the default management network
• C. manually by the admin
• D. by DHCP using the infrastructure VLAN

Answer: A

NEW QUESTION 10
On which two criteria can an endpoint be classified statically into an application EPG? (Choose two)

• A. guest operating system
• B. VLAN
• C. VM name
• D. physical leaf port
• E. DNS host name

Answer: BD

NEW QUESTION 11
In a Cisco ACI environment, which option best describes “contracts"?

• A. to determine endpoint group membership status
• B. named groups of related endpoints
• C. a set of interaction rules between endpoint groups
• D. a Layer 3 forwarding domain

Answer: C

NEW QUESTION 12
Which two statements about IP Source Guard are true? (Choose two)

• A. IP Source Guard limits IP traffic on an interface to only those sources that have an IPMAC address binding table entry or static IP source entry
• B. IP Source Guard requires that DHCP snooping is disabled
• C. When you first enable IP Source Guard on an interface, you may experience disruption in IP traffic until the hosts on the interface receive a new IP address from a DHCP server
• D. By default,IP Source Guard is enable on all interfaces
• E. IP Source Guard is independent of DHCP anooping to build and maintain the IP-MAC address binding table

Answer: AC

Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_2/security/configuration/guide/n1000v_security/n1000v_security_14sourceguard.pdf

NEW QUESTION 13
Which definition of Intelligent Service Card Manager is true?

• A. part of the RISE service that resides on an appliance (for example, Citrix NetScaler) that is responsible for sending Route Health Injection messages to a Cisco Nexus switch
• B. management software to manage provisioning of RISE services on a Cisco Nexusswitch
• C. management software to manage Cisco Nexus devices
• D. part of the RISE service that resides on a Cisco Nexus switch that is responsible for handlingtasks related to receiving Route Health Injection messages from appliances and programmingthose routes in the universal routing information base
• E. part of the RISE service that is responsible for establishing initial connectivity with remoteappliances (for exampl
• F. Citrix NetScaler)

Answer: D

NEW QUESTION 14
Refer to the exhibit.

Which purpose of the ipospf transmit-delay command is true?

• A. This variable adds a specified time to the age field of an OSPF updat
• B. This parameter has more significance on very low-speed links.
• C. This variable is used to negotiate transmit –delay with the OSPF neighbors.
• D. This variable is used by the OSPF to send hello packets periodically after the time specified in the transmit-delay command.
• E. This variable sends the OSPF database to the neighbors periodically after the time specified in the transmit-delay command.

Answer: A

NEW QUESTION 15
Which three editing optional of Cisco UCS Director workflow are valid? (Choose three)

• A. Rename a workflow
• B. Reorder inputs
• C. Change an input from mandatory to optional
• D. change priority of a workflow
• E. Edit tasks in the workflow
• F. Delete inputs

Answer: ABF

NEW QUESTION 16
What is the correct upgrade sequence for Cisco Cloud Center components?

• A. CCM, AMQP, CCO, Health Monitor
• B. CCM, CCO, Health Monitor, AMQP
• C. CCM, CCO, AMQP Health Monitor
• D. CCM, Health Monitor, AMQP, CCO

Answer: C

NEW QUESTION 17
On which two features does ITD depend? (Choose two)

• A. interface-vlan
• B. IP SLA
• C. BFD
• D. WCCP
• E. PBR

Answer: BE