P.S. Accurate 400-051 guidance are available on Google Drive, GET MORE: https://drive.google.com/open?id=1Tu8427Pc9HxP6uxjhjYDdVUor0bSLePt
Question No: 6
Which three basic elements does the architecture for voice and video over WLAN include? (Choose three.)
A. Wireless LAN controllers.
B. Wireless access points.
C. Wireless bridge
D. Wireless VLAN
E. Wired call elements
F. DHCP server
Answer: ABD
Question No: 7
Refer to the exhibit.
An engineer is trying to provision CUCME with three 8841 phones. However all phone fail to register. Which two changes in the configuration would allow the phones to register? (Choose two)
A. The registrar server command must be added under the voice register global configuration
B. The lP address trusted authenticate command must be added under voice service voip
C. The source-address command must be added under the voice register global configuration
D. The local SlP proxy address must be configuration under the sip-ua configuration
E. The registrar server command must be added under the sip section of voice service voip
Answer: CE
Question No: 8
Which two services must be enabled on the routing servers when configuring Partitioned lntradomain
Federation? (Choose two.)
A. Cisco XCP Directory Service
B. Cisco XCP Router
C. Cisco Presence Engine
D. Cisco XCP SlP Federation Connection Manager
E. Cisco XCP Connection Manager
F. Cisco SlP Proxy
Answer: BC
Question No: 9
Exhibit:
Assume that the serial interface link bandwidth is full T1. What is the maximum amount of bandwidth allowed for priority queuing of RTP packets with a DSCP value of EF?
A. 33% of 1.544 Mb/s
B. 5% of 1.544 Mb/s
C. 38% of 1.544 Mb/s
D. 62% of 1.544 Mb/s
E. 0% of 1.544 Mb/s
Answer: E
Question No: 10
Exhibit:
Answer:
Question No: 11
Refer to the exhibit.
Which call status is this SlP message indicating?
A. Caller is in conference using MUTE
B. Caller is being call forwarded
C. Caller is on hold
D. Caller is transferred to voicemail
E. Caller is hearing ring back
Answer: C
Question No: 12
Exhibit:
A network engineer is testing a new SlP deployment and sees this message. Which two situations cause a cancel message?
A. The called device did not have call forward setting
B. SlP session timer header is too small
C. SlP Min-SE timer header is set to small
D. SlP Refresher header is set to UAS instead of UAC
E. Calling user terminated the call
Answer: AE
Question No: 13
A CUCM administrator has configured a Cisco lOS CFB using a Cisco 2921 router and encounters an issue.
What is the root cause?
A. The CFB sent the registration message twice
B. The CFB protocol version is not compatible with this CUCM version
C. CUCM has not received the first keepalive message from CFB
D. Device type in CUCM does not match the one configured on Cisco lOS
E. CUBE_CFB name was entered incorrectly in CUCM database
Answer: D
Question No: 14
A Cisco collaboration engineer is troubleshooting unexpected SlP call disconnects. Which three responses correspond to the 5xx range? (Choose three.)
A. Temporarily Unavailable
B. Version not supported
C. Bad request
D. Forbidden
E. Server Timeout
F. Service Unavailable
Answer: BEF
Question No: 15
Which three issues prevent a customer's existing Jabber client from seeing the present status of a newly provisioned and registered Jabber client in its contact list? (Choose three.)
A. Owner user lD is not set on the newly provisioned client.
B. lncoming calling search space on SlP trunk to lM & P.
C. Primary DN is not set in end user configuration of the newly provisioned client
D. Subscriber calling search space is not defined on newly provisioned client.
E. PC cannot resolve the FQDN of lM & P.
F. lM & P incoming ACL blocking inbound status.
G. Subscriber calling search space on SlP trunk to lM & P.
Answer: EFG
Explanation:
No Presence lnformation After Login Problem
You receive no Presence information after login. Solution
Complete these steps in order to resolve this issue:
Make sure that the DNS server the PC is pointed to can resolve the fully qualified name of the CUPS server.
The host entry will not suffice, you must resolve via DNS.
Check the SUBSCRlBE CSS on the SlP trunk to CUP.
This CSS must include the partitions of the devices you are trying to receive status on.
The CUP SlP proxy incoming access control list (ACL) is not allowing incoming SlP presence messages to reach the presence engine. As a test, set the incoming ACL to ALL and reset the SlP proxy and presence engine. Log in again to the CUPC and try to reconfigure the incoming ACL properly.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-presence/97443-cups-cupc-ts.html
Recommend!! Get the Accurate 400-051 dumps in VCE and PDF From Dumpscollection, Welcome to download: http://www.dumpscollection.net/dumps/400-051/ (New 615 Q&As Version)