New Questions 2

Which feature allows you to specify which endpoints ring when someone calls a user on a specific destination ID?

A. FindME

B. Extension Mobility

C. Speech Connect

D. Single Number Reach

View Answer

New Questions 3

Refer to the exhibit.

The "DSCP for Video Calls" Cisco CallManager service parameter is set to 34. What is the correct DSCP value to use when configuring a class map in a Cisco IOS router?

A. cs4

B. ef

C. af23

D. af41

View Answer

New Questions 4

The administrator at Company X is getting user reports of inconsistent quality on video calls between endpoints registered to Cisco Unified Communications Manager. The administrator runs a wire trace while a video call is taking place and sees that the packets are not set to AF41 for desktop video as they should be.

Where should the administrator look next to confirm that the correct DSCP markings are being set?

A. on the MGCP router at the edge of both networks

B. the service parameters in the VCS Control

C. the QoS service parameter in Cisco Unified Communications Manager

D. on the actual Cisco phone itself because the DSCP setting is not part of its configuration

file downloaded at registration

E. The setting cannot be changed for video endpoints that are registered to Cisco Unified Communications Manager, but only when they are registered to the VCS Control.

View Answer

New Questions 5

When video endpoints register with Cisco Unified Communications Manager, where are DSCP values configured?

A. in Unified CM, under Enterprise Parameters Configuration

B. in Unified CM, under Device > Device Settings > Device Defaults

C. in Unified CM, under Service Parameters > Cisco CallManager Service > Cluster-wide Parameters

D. DSCP parameters are always configured on each individual video endpoint.

View Answer

New Questions 6

Which option configures the secondary dial tone option for SRST mode to let the users hear the dial tone for PSTN calls?

A. voice service voip secondary dialtone 0

B. call-manager-fallback secondary dialtone 0

C. dial-peer voice 1 pots secondary dialtone 0

D. ccm-manager secondary dialtone 0

View Answer

New Questions 7

Which gateway does the Cisco Unified Communications Manager control all call activity?

A. SIP

B. MGCP

C. H.323

D. Media

View Answer

New Questions 8

The Cisco Unified Communications system of a company has five types of devices:

u2022Cisco Jabber Desktop

u2022CP-7965

u2022DX-650

u2022EX-60

u2022MX-200

Which two types of devices are affected when an engineer changes the DSCP for TelePresence Calls parameter? (Choose two.)

A. DX-650

B. Cisco Jabber Desktop

C. CP-7965

D. DX-80

E. MX-200

View Answer

New Questions 9

Refer to the exhibit.

Which configuration change is needed to enable NANP international dialing during MGCP fallback?

A. Change the dial peer to dial-peer voice 901 voip.

B. Change the dial peer to dial-peer voice 9011 pots.

C. Add the command prefix 011 to the dial peer.

D. Add the command prefix 9011 to the dial peer.

View Answer

New Questions 10

Which three configuration settings are included in a default region configuration? (Choose three.)

A. Immersive Bandwidth

B. Video Call Bandwidth

C. Audio Codec

D. Link Loss Type

E. Real Time Protocol

F. Location Description

View Answer

New Questions 11

When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?

A. Set QoS mode to DiffServ and tag value 32.

B. Set QoS mode to IntServ and tag value to 34.

C. Set QoS mode to DiffServ and tag value 34.

D. Set QoS mode to IntServ and tag value to 32.

E. Set QoS mode to ToS and tag value to 32.

View Answer