[2021-New] Cisco 300-075 Dumps With Update Exam Questions (101-110)

300-075 Dumps

300-075 Exam Questions - Online Test

300-075 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Q1. Which functionality does ILS use to link all hub clusters in an ILS network?

A. Fullmesh

B. Automesh

C. ILS updates

D. multicast

Answer: B

Q2. Which two statements regarding you configuring a traversal server and traversal client relationship are true? (Choose two.)

A. VCS supports only the H.460.18/19 protocol for H.323 traversal calls.

B. VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.

C. VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.

D. If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client to the traversal server for SIP signaling.

E. A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.

Answer: B,D

Q3. Refer to the exhibit.

Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location?

A. Total of four calls; two incoming and two outgoing.

B. Total of two calls in either direction.

C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration.

D. Total of four calls in either direction.

E. Two outgoing calls. Incoming calls are unlimited.

Answer: D

Explanation:

Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640

Q4. Which command displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the Cisco Unified SRST router?

A. show call-manager-fallback all

B. show dial-peer voice summary

C. show ephone summary

D. show voice port summary

Answer: A

Q5. Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN?

A. Configure Cisco IP Phones for AAR.

B. Configure AAR to work with SRST.

C. Configure AAR to work with CTI route points.

D. This configuration is not possible using AAR.

Answer: D

Q6. How is the region assigned to a device such as an IP phone?

A. Regions are assigned directly in the device configuration page.

B. Regions can be assigned only through a device pool.

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence.

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence.

Answer: B

Q7. Refer to the exhibit.

You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?

A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.

B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.

C. The sccp ccm group number needs to match the associate ccm 2 command.

D. The maximum sessions command must match the number of codecs configured under the dsp farm profile.

E. The sccp ccm group number must match the voice-card number.

Answer: B

Explanation:

Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtr ns.html

Q8. Scenario

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

Use the exhibits to answer the following questions.

Locations

CSS

Movi Failure

Movi Settings

CIPTV Topo

Subzone

Links

Pipe

A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure?

A. Not enough bandwidth has been allocated.

B. Device Pool.

C. Location.

D. The pipe is not functioning.

Answer: A

Explanation:

Based on the exhibit, each call is limited to no more than 128kbps per call, but the total available bandwidth is set to 256 kbps. This will allow the first to calls to go through, but there will be no more available bandwidth for the third call.

Q9. Refer to the following exhibit.

Which Cisco IOS SAF Forwarder configuration is correct?

A. Exhibit A

B. Exhibit B

C. Exhibit C

D. Exhibit D

Answer: A

Explanation:

Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below

1. enable

2. configure terminal

3. router eigrp virtual-instance-name

4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number

5. topology base

6. external-client client_label

7. exit-sf-topology

8. exit-service-family

9. exit

10. service-family external-client listen {ipv4 | ipv6} tcp_port_number

11. external-client client-label

12. username user-name

13. password password-name

14.

Q10. Which bandwidth amounts are correct for configuring locations?

A. 8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722

B. 8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722

C. 64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722

D. 8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722

Answer: A