Q1. Cisco Unified border element is configured to support RSVP-based CAC. When is the RSVP path and reservation message sent and received?
A. Immediately after the call setup message is received and the reservation message is received after H.245 capabilities negotiation is completed.
B. The path and reservation messages are sent and received after the H.245 capabilities negotiation is completed.
C. The path and reservation messages are sent and received immediately after the call setup message is received.
D. The path is setup once the global command call rsvp-sync is configured.
Answer: C
Q2. Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC?
A. Configure AAR in Cisco Unified Communications Manager.
B. Configure CFUR in Cisco Unified Communications Manager.
C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager.
D. Configure a route pattern to a gateway in Cisco Unified Communications Manager.
Answer: C
Q3. Refer to the exhibit.
All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented?
A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0.
B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first.
C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.
D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool.
Answer: C
Explanation:
Expiation:
To ensure that the hardware bridge is utilized first with all its resources BEFORE the software bridge is used … you need to have two separate MRG’s and list the hardware MRG 1st in the MRGL …
Q4. Which three options are supplementary services that are affected by MTP? (Choose three.)
A. Call Hold
B. Call Transfer
C. Call Park
D. Call Pickup
E. Speed Dial
F. Call Back
Answer: A,B,C
Q5. You are deploying a remote office setup that connects with Cisco Unity Communications Manager at a hub location. You have an available dedicated bandwidth of 20% from the 2-Mb/s WAN circuit for VoIP that supports a maximum of 17 calls. Which codec do you configure in Cisco Unity Communications Manager to achieve this?
A. G.722
B. G.711
C. G.729
D. iSAC
E. GSM-FR
F. iLBC
Answer: C
Q6. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs?
A. Media Resource Group List
B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space
Answer: E
Explanation:
A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call.
Q7. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.
Answer: D
Q8. Refer to the exhibit.
The HQ Cisco Unified Communications Manager has been configured for end-to-end
RSVP. The BR Cisco Unified Communications Manager has been configured for local
RSVP.
RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR phone at the BR site, which statement is true?
A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. The BR Cisco Unified Communications Manager will use local RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.
Answer: D
Explanation:
Incorrect Answer: A, B, C A possible cause is that the same router is being used as the calling and called RSVP agents, and that router is not running the latest IOS version, which supports loopback on RSVP reservation. Make sure that the router is running the latest IOS version. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.html #wp1155102
Q9. On which two call legs is the media encryption enforced in a Collaboration Edge design? (Choose two.)
A. Expressway-C to Cisco Unified Communications Manager
B. Expressway-C to Expressway-E
C. Expressway-E to outside-located endpoint
D. Expressway-E to Cisco Unified Communications Manager
E. Expressway-C to internal endpoint
Answer: B,C
Q10. Which statement is true when device mobility mode is enabled or disabled in the Phone
Configuration window?
A. The device mobility mode phone settings take precedence over the service parameter settings.
B. The service parameter settings take precedence over the device mobility mode phone settings.
C. The combined service parameter settings and the device mobility mode phone settings will be used.
D. The default settings will be used due to the conflicts.
Answer: A