[2021-New] Cisco 300-101 Dumps With Update Exam Questions (4-13)

300-101 Dumps

300-101 Exam Questions - Online Test

300-101 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

P.S. Approved 300-101 testing engine are available on Google Drive, GET MORE: https://drive.google.com/open?id=1oF6hAYEiseB3LPIXYA2sgTXv0r2MX46d

New Cisco 300-101 Exam Dumps Collection (Question 4 - Question 13)

New Questions 4

On which two types of interface is Frame Relay switching supported? (Choose two.)

A. serial interfaces

B. Ethernet interfaces

C. fiber interfaces

D. ISDN interfaces

E. auxiliary interfaces

Answer: A,D

New Questions 5

Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network? (Choose three.)

A. simplified Layer 3 network virtualization

B. improved shared services support

C. enhanced management, troubleshooting, and usability

D. reduced configuration and deployment time for dot1q trunking

E. increased network performance and throughput

F. decreased BGP neighbor configurations

Answer: A,B,C

New Questions 6

A Network engineer wants to configure logging to compile and send information to an external server. Which type of logging must be configured?

A. Terminal

B. Syslog

C. Buffer

D. Console

Answer: B

New Questions 7

Refer to the exhibit.

How would you confirm on R1 that load balancing is actually occurring on the default- network (0.0.0.0)?

A. Use ping and the show ip route command to confirm the timers for each default network resets to 0.

B. Load balancing does not occur over default networks; the second route will only be used for failover.

C. Use an extended ping along with repeated show ip route commands to confirm the gateway of last resort address toggles back and forth.

D. Use the traceroute command to an address that is not explicitly in the routing table.

Answer: D

Explanation:

The most simple method to test load balancing is to use the u201ctracerouteu201d command. If load balancing is working correctly, we will see different paths to reach the destination each time

we use that command.

Unknown address will be routed via the default-network 0.0.0.0 so we must use an address that is not explicitly in the routing table.

New Questions 8

A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C.

Which configuration on Router B will achieve the desired effect?

A. access-list 1 permit 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route-

map policy permit 10match ip address 1set ip next-hop 172.16.12.3

B. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2

C. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.14.4

D. access-list 1 deny 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2

Answer: A

Explanation:

The u201cnext-hopu201d IP address should be the E1 interface of router C (172.16.12.3).

New Questions 9

Refer to the exhibit. Which option describes why the EIGRP neighbors of this router are not learning routes that are received fromOSPF?

A. The subnet defined in OSPF is not part of area 0.

B. Default metrics are not configured under EIGRP.

C. There is no overlap in the subnets advertised.

D. The routing protocols do not have the same AS number.

Answer: B

New Questions 10

A network engineer is troubleshooting connectivity issues with a directly connected RIPng neighbor. Which command should directly connected RIPng neighbor adjacencies only?

A. router#show ipv6 rip next-hops

B. router#show ip rip neighbors

C. router#show ipv6 routers

D. router#show ipv6 rip database

Answer: A

New Questions 11

Which technology uses the many-to-one method of mapping IP addresses?

A. static NAT

B. dynamic NAT

C. NAT-PT

D. PAT

Answer: D

Explanation: Overloadingu2014Maps multiple unregistered IP addresses to a single registered IP address (many to one) using different ports. This method is also known as Port Address Translation (PAT). By using overloading, thousands of users can be connected to the Internet by using only one real global IP address

New Questions 12

ALWAYS block the outbound web traffic on Saturdays and Sunday between 1:00 to 23:59

A. periodic Saturday Sunday 01:00 to 23:59 and IN

B. periodic Saturday Sunday 01:00 to 23:59 and OUT

C. periodic Saturday Sunday 01:00 to 11:59 and IN

D. Absolute Saturday Sunday 01:00 to 11:59 and IN

Answer: B

New Questions 13

Using the rules for IPv6 addressing, how can the address 2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?

A. 2031:0:240F::09C0:123A:121B

B. 2031::240F::09C0:123A:121B

C. 2031::240F:9C0::123A:121B

D. 2031::240F:::09C0:123A:121B

Answer: A

Explanation:

Leading zeros can be truncated. For example u201c0000 can be be just written as empty. In the above example :: indicates that it has multiple 0s in that location. Typically the IPv6 format can be written down in three ways 1) compressed, 2) uncompressed and 3) fully uncompressed as shown below. All of the following are the same:

Recommend!! Get the Approved 300-101 dumps in VCE and PDF From Allfreedumps, Welcome to download: https://www.allfreedumps.com/300-101-dumps.html (New 436 Q&As Version)