New Questions 10

A network engineer executes the u201cipv6 flowsetu201d command. What is the result?

A. Flow-label marking in 1280-byte or larger packets is enabled.

B. Flow-set marking in 1280-byte or larger packets is enabled.

C. IPv6 PMTU is enabled on the router.

D. IPv6 flow control is enabled on the router.

View Answer

New Questions 11

Refer to the exhibit.

In the network diagram, Area 1 is defined as a stub area. Because redistribution is not allowed in the stub area, EIGRP routes cannot be propagated into the OSPF domain. How does defining area 1 as a not-so-stubby area (NSSA) make it possible to inject EIGRP routes into the OSPF NSSA domain?

A. by creating type 5 LSAs

B. by creating type 7 LSAs

C. by creating a link between the EIGRP domain and the RIP domain, and redistributing EIGRP into RIP

D. by manually changing the routing metric of EIGRP so that it matches the routing metric of OSPF

View Answer

New Questions 12

What does the number 16 in the following command represent?

Router(config)#snmp-server user abcd public v2c access 16

A. the mask of the files that are allowed to use community string public.

B. the standard named access list 16, which contains the access rules that apply to user abcd.

C. the number of concurrent users who are allowed to query the SNMP community.

D. the user ID that is allowed to use the community string public.

View Answer

New Questions 13

An EUI-64 bit address is formed by inserting which 16-bit value into the MAC address of a device?

A. 3FFE

B. FFFE

C. FF02

D. 2001

View Answer

New Questions 14

A company's corporate policy has been updated to require that stateless, 1-to-1, and IPv6 to IPv6 translations at the Internet edge are performed. What is the best solution to ensure compliance with this new policy?

A. NAT64

B. NAT44

C. NATv6

D. NPTv4

E. NPTv6

View Answer

New Questions 15

Refer to the exhibit.

The excerpt was taken from the routing table of router SATX. Which option ensures that routes from 51.51.51.1 are preferred over routes from 52.52.52.2?

A. SATX(config-router)#distance 90 51.51.51.1 0.0.0.0

B. SATX(config-router)#distance 89.52.52.52.2 0.0.0.0

C. SATX(config-router)#distance 90.52.52.52.2 0.0.0.0

D. SATX(config-router)#administrative distance 91 51.51.51 0.0.0.0

E. SATX(config-router)#distance 89 51.51.51.1 0.0.0.0

F. SATX(config-router)#administrative distance 91 52.52.52.2 0.0.0.0

View Answer

New Questions 16

Which address is used by the Unicast Reverse Path Forwarding protocol to validate a packet against the routing table?

A. source address

B. destination address

C. router interface

D. default gateway

View Answer

New Questions 17

A packet capture log indicates that several router solicitation messages were sent from a local host on the IPv6 segment. What is the expected acknowledgment and its usage?

A. Router acknowledgment messages will be forwarded upstream, where the DHCP server will allocate addresses to the local host.

B. Routers on the IPv6 segment will respond with an advertisement that provides an external path from the local subnet, as well as certain data, such as prefix discovery.

C. Duplicate Address Detection will determine if any other local host is using the same IPv6 address for communication with the IPv6 routers on the segment.

D. All local host traffic will be redirected to the router with the lowest ICMPv6 signature, which is statically defined by the network administrator.

View Answer

New Questions 18

Which two statements about Frame Relay Point-to-Point connections are true? (Choose Two)

A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.

B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.

C. The device can establish a point-to-point connection to the cloud without a DLCI.

D. They can operate normally without a DLCI map.

E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.

View Answer

New Questions 19

Which two options can you use to configure an EIGRP stub router? (Choose two)

A. summary-only

B. receive-only

C. external

D. summary

E. totally-stubby

F. not-so-stubby

View Answer