Q1. In which portion of the frame is the 802.1q header found?

A. within the Ethernet header

B. within the Ethernet payload

C. within the Ethernet FCS

D. within the Ethernet source MAC address

View Answer

Q2. What is the default HSRP priority?

A. 50

B. 100

C. 120

D. 1024

View Answer

Q3. A network engineer tries to configure storm control on an EtherChannel bundle. What is the result of the configuration?

A. The storm control settings will appear on the EtherChannel, but not on the associated physical ports.

B. The configuration will be rejected because storm control is not supported for EtherChannel.

C. The storm control configuration will be accepted, but will only be present on the physical interfaces.

D. The settings will be applied to the EtherChannel bundle and all associated physical interfaces.

View Answer

Q4. Which statement about LLDP-MED is true?

A. LLDP-MED is an extension to LLDP that operates between endpoint devices and network devices.

B. LLDP-MED is an extension to LLDP that operates only between network devices.

C. LLDP-MED is an extension to LLDP that operates only between endpoint devices.

D. LLDP-MED is an extension to LLDP that operates between routers that run BGP.

View Answer

Q5. A network engineer must implement Ethernet links that are capable of transporting frames and IP traffic for different broadcast domains that are mutually isolated. Consider that this is a multivendor environment. Which Cisco IOS switching feature can be used to achieve the task?

A. PPP encapsulation with a virtual template

B. Link Aggregation Protocol at the access layer

C. dot1q VLAN trunking

D. Inter-Switch Link

View Answer

Q6. after UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failed retries. The port then transitions into the errdisable state. Which option describes what causes the port to go into the errdisable state?

A. Normal UDLD operations that prevent traffic loops.

B. UDLD port is configured in aggressive mode.

C. UDLD is enabled globally.

D. UDLD timers are inconsistent.

View Answer

Q7. Which technique allows specific VLANs to be strictly permitted by the administrator?

A. VTP pruning

B. transparent bridging

C. trunk allowed VLANs

D. VLAN access-list

E. L2P tunneling

View Answer

Q8. Which First Hop Redundancy Protocol is an IEEE Standard?

A. GLBP

B. HSRP

C. VRRP

D. OSPF

View Answer

Q9. What effect does the mac address-table aging-time 180 command have on the MAC address-table?

A. This is how long a dynamic MAC address will remain in the CAM table.

B. The MAC address-table will be flushed every 3 minutes.

C. The default timeout period will be 360 seconds.

D. ARP requests will be processed less frequently by the switch.

E. The MAC address-table will hold addresses 180 seconds longer than the default of 10 minutes.

View Answer

Q10. A new network that consists of several switches has been connected together via trunking interfaces. If all switches currently have the default VTP domain name "null", which statement describes what happens when a domain name is configured on one of the switches?

A. The switch with the non-default domain name restores back to "null" upon reboot.

B. Switches with higher revision numbers does not accept the new domain name.

C. VTP summary advertisements are sent out of all ports with the new domain name.

D. All other switches with the default domain name become VTP clients.

View Answer