Q1. Which option lists the modes that are available for configuring UDLD on a Cisco switch?

A. normal and aggressive

B. active and aggressive

C. normal and active

D. normal and passive

E. normal and standby

View Answer

Q2. Which statement about LLDP-MED is true?

A. LLDP-MED is an extension to LLDP that operates between endpoint devices and network devices.

B. LLDP-MED is an extension to LLDP that operates only between network devices.

C. LLDP-MED is an extension to LLDP that operates only between endpoint devices.

D. LLDP-MED is an extension to LLDP that operates between routers that run BGP.

View Answer

Q3. An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should. What is the reason for this?

A. RSTP has been enabled per interface and not globally.

B. The STP root bridge selection is forcing key ports to remain in non-rapid transitioning mode.

C. STP is unable to achieve rapid transition for trunk links.

D. The switch does not have the processing power to ensure rapid transition for all ports.

View Answer

Q4. Which command globally enables AAA on a device?

A. aaa new-model

B. aaa authentication

C. aaa authorization

D. aaa accounting

View Answer

Q5. For client server failover purposes, the application server team has indicated that they must not have the standard 30 second delay before their switchport enters a forwarding state. For their disaster recovery feature to operate successfully, they require the switchport to enter a forwarding state immediately. Which spanning-tree feature satisfies this requirement?

A. Rapid Spanning-Tree

B. Spanning-Tree Timers

C. Spanning-Tree FastPort

D. Spanning-Tree PortFast

E. Spanning-Tree Fast Forward

View Answer

Q6. After port security is deployed throughout an enterprise campus, the network team has been overwhelmed with port reset requests. They decide to configure the network to automate the process of re-enabling user ports. Which command accomplishes this task?

A. switch(config)# errdisable recovery interval 180

B. switch(config)# errdisable recovery cause psecure-violation

C. switch(config)# switchport port-security protect

D. switch(config)# switchport port-security aging type inactivity

E. switch(config)# errdisable recovery cause security-violation

View Answer

Q7. Refer to the exhibit.

The users in an engineering department that connect to the same access switch cannot access the network. The network engineer found that the engineering VLAN is missing from the database. Which action resolves this problem?

A. Disable VTP pruning and disable 802.1q.

B. Update the VTP revision number.

C. Change VTP mode to server and enable 802.1q.

D. Enable VTP pruning and disable 802.1q.

View Answer

Q8. A server with a statically assigned IP address is attached to a switch that is provisioned for DHCP snooping. For more protection against malicious attacks, the network team is considering enabling dynamic ARP inspection alongside DHCP snooping. Which solution ensures that the server maintains network reachability in the future?

A. Disable DHCP snooping information option.

B. Configure a static DHCP snooping binding entry on the switch.

C. Trust the interface that is connected to the server with the ip dhcp snooping trust command.

D. Verify the source MAC address of all untrusted interfaces with ip dhcp snooping verify mac-address command.

View Answer

Q9. A new network that consists of several switches has been connected together via trunking interfaces. If all switches currently have the default VTP domain name "null", which statement describes what happens when a domain name is configured on one of the switches?

A. The switch with the non-default domain name restores back to "null" upon reboot.

B. Switches with higher revision numbers does not accept the new domain name.

C. VTP summary advertisements are sent out of all ports with the new domain name.

D. All other switches with the default domain name become VTP clients.

View Answer

Q10. A network engineer must improve bandwidth and resource utilization on the switches by stopping the inefficient flooding of frames on trunk ports where the frames are not needed. Which Cisco IOS feature can be used to achieve this task?

A. VTP pruning

B. access list

C. switchport trunk allowed VLAN

D. VLAN access-map

View Answer