Q1. Route lists determine the order of preference for route group usage. If a route list is configured, what isthe minimum number of route groups that you must configure?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
H. 8
Answer: A
Explanation: Reference:
Page 205
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q2. Which two types of encoding are available to configure a T1 controller for CAS?
A. AME.
B. ESF.
C. SF.
D. B8SF.
E. B8ZS.
F. AMI.
Answer: E,F
Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/voice/digital-cas/24642-cas-config.html
Q3. Which two options are resources in a route list that route calls that match a defined route pattern? (Choose two.)
A. gateways
B. route groups
C. virtual machine servers
D. IP phones
Answer: A,B
Q4. Refer to the exhibit.
A Cisco Unified Communications Manager group is configured with the subscriber (10.1.5.3) listed first and the publisher (10.1.5.2) listed second. Which Cisco Unified Communications Manager is used for incoming calls through an MGCP gateway?
A. the publisher
B. both the publisher and subscriber in a round-robin format
C. the first server listed in the Cisco Unified Communications Manager group list
D. the subscriber
Answer: A
Q5. You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remotesite, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set ofcommands for this configuration?
A. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B. R1(config)# controller t1 1/0
R1(config-controller)# linecode hdb3
R1(config-controller)# framing crc4
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
C. R1(config)# isdn switch-type primary-5ess
R1(config)# controller t1 t1/0
R1(config-controller)# pri-group timeslots 1-24
D. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
Answer: D
Explanation: Reference:
Page 9-11 http://www.cisco.com/c/en/us/td/docs/ios/voice/isdn/configuration/guide/12_4t/vi_12_4t_bo ok/
vi_imp_t1cas_voip.pdf
Q6. Which two codecs are the best codecs to use in WAN and LAN? (Choose two.)
A. WAN codec G.711
B. LAN codec G.729
C. WAN codec G.729
D. LAN codec G.711
Answer: C,D
Q7. Refer to the exhibit.
9.1[2-9]XX[2-9]XXXXXX
9.18[0,6-8][0,6-8]XXXXXXX
9.1900XXXXXXX
9011.!
9011.!#
To reach an external number, a user first dials a 9. Which route pattern will bematched if a user dials an international number 011442288223001 and terminates the interdigittimeout?
A. 9.1[2-9]XX[2-9]XXXXXX.
B. 9.18[0,6-8][0,6-8]XXXXXXX.
C. 9.1900XXXXXXX.
D. 9011.!.
E. 9011.!#.
Answer: E
Q8. Which command is used to enter the DSP farm profile configuration mode?
A. dspfarm-profile 100 transcode
B. dspfarmprofile 100 transcode
C. dspfarm profile 100 transcode
D. dspfarm 100 profile transcode
Answer: C
Q9. Refer to Exhibit:
If the user at extension 1001 dials the user at extension 2011, which dial peer is used to
route the call?
A. 3
B. 2
C. 4
D. 1
Answer: B
Q10. Which four call coverage features are used by voice gateways? (Choose four.)
A. call hunt
B. Call Park
C. Call Pickup
D. call redirecting
E. overlaid phone-dn
F. basic automatic call distribution
G. overlaid ephone-dn
H. basic manual call distribution
Answer: A,C,F,G