Q1. A new DHCP server is placed on a network segment during off hours. When work resumes, users on a different network segment report connectivity issues. Users on the same network segment report no connectivity issues. Which of the following is the MOST likely reason for the connectivity issues?

A. The DHCP server was configured without specifying a WINS server address for the users.

B. The DHCP server was configured without specifying a DNS server address for the users.

C. The DHCP relay agent was not configured on the adjacent network segment.

D. The DHCP server was configured to use private IP addressing to all network segments.

View Answer

Q2. An administrator has a UPS rated at 200 amps per hour. Which of the following is the maximum runtime of this UPS when hooked up to a server drawing 400 amps per hour?

A. 15 minutes

B. 30 minutes

C. 60 minutes

D. 120 minutes

View Answer

Q3. A server administrator is researching the purchase of SSD for a server. The administrator receives a report from the datacenter technician detailing current storage requirements and future growth planning estimates as follows:

ServerA: Current-15TB-Future-50% growth

ServerB: Current-20TB-Future-80% growth

Based on this report, which of the following represents the MINIMUM storage requirements needed?

A. ServerA-18TB, ServerB-24TB

B. ServerA-22TB, ServerB-22TB

C. ServerA-23TB, ServerB-36TB

D. ServerA-25TB, ServerB-40TB

View Answer

Q4. Which of the following server types is commonly used for authentication and credential storage?

A. File server

B. Directory server

C. Web server

D. DNS server

View Answer

Q5. A company has hired a consultant to review the production storage infrastructure and provide suggestions on improving performance. The consultant has identified a bottleneck in the production switching fabric and successfully tested the solution in a lab environment. Which of the following should the consultant perform NEXT, according to best practices?

A. Implement the solution in production since it was tested in the lab.

B. Establish a plan of action to implement the solution in production.

C. Perform a root cause analysis of what caused the bottleneck.

D. Establish a theory describing the possible issue in the production network.

View Answer

Q6. Which of the following describes a rack mounted server that is 2 rack units (2U) in height?

A. 2.5 inches (6.35 cm)

B. 3.0 inches (7.62 cm)

C. 3.5 inches (8.89 cm)

D. 4.0 inches (10.16 cm)

View Answer

Q7. Which of the following is the purpose of an NTP server?

A. For hosting instant messaging applications

B. For synchronizing clocks on network devices

C. For file sharing and collaboration

D. For hosting newsgroups

View Answer

Q8. When troubleshooting a failed backup, atechnician runs the backup using the same tape but on a different tape drive in the same tape library. The backup fails again. Which of the followingshould be the FIRST item the technician should examine as a failure?

A. Tape drive

B. Tape library

C. Tape media

D. Tape capacity

View Answer

Q9. A technician has completed the installation and configuration of a third email server. The technician has configured the firewall to permit email traffic, but the mail is only being received by the two older servers. Which of the following should the technician configure to ensure incoming email will be processed by all three servers?

A. Enable NTP to ensure all three servers are synchronized.

B. Configure IMAP on the new mail server.

C. Add the DNS server option in DHCP.

D. Update the MX record in DNS.

View Answer

Q10. Which of the following is the MOST secure method of storing critical and sensitive system information (e.g. administrative passwords, trusted signing keys)?

A. Store the information encrypted and offline in a storage safe.

B. Encrypt the information using a zip file with a password.

C. Utilize a drive with full disk encryption enabled.

D. Create an encrypted virtual disk for storage.

View Answer