NEW QUESTION 1
Which statement about fabric failover for Fibre Channel communication is true?

• A. You can enable hardware Fibre Channel failover.
• B. Cisco UCS load balances Fibre Channel traffic between the two fabrics.
• C. You must use a Fibre Channel multipath I/O driver.
• D. You do not have to use anything.

Answer: C

Explanation: Reference:
https://supportforums.cisco.com/t5/unified-computing-system/san-multi-pathing-best-practices/td-p/1545645 https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/unified-computing-system/116471-confi https://kb.netapp.com/support/s/article/how-to-verify-windows-fibre-channel-configurations-with-multipathing-i

NEW QUESTION 2
Which three items represent some of the features that can be defined in a Cisco Unified Computing System Manager port profile? (Choose three.)

• A. QoS policy
• B. ACL
• C. NetFlow
• D. port security
• E. network control policy
• F. VLAN or VLANs

Answer: AEF

NEW QUESTION 3
You configure a service profile template from the Cisco UCS Manager GUI by using the Create Local Disk Configuration Policy option The No RAID local disk policy mode is selected and the Protect Configuration property is disabled. You create a service profile that is created from the service profile template. You apply the service profile to a server that has an operating system installed on a RAID-10 volume. Which statement about the server after it is associated to the service profile is true?

• A. The server has RAID-0 configured on the local disk.
• B. The server has RAID-1 configured on the local disk.
• C. The server has the local storage detached.
• D. The local disk of the server remains RAID-10.

Answer: C

NEW QUESTION 4
Which Cisco UCS Manager feature allows you to specify multiple LDAP servers for user authentication?

• A. Realm
• B. LDAP Provider Group
• C. Authentication Domain
• D. Organization

Answer: C

NEW QUESTION 5
Which VMware ESXi 5.0 CLI command will validate PassThru interfaces when they are available?

• A. vem status -v
• B. vempassthru-v
• C. vemintf -v
• D. vemifconfig -v
• E. vempts -v

Answer: A

NEW QUESTION 6
Which Cisco solution addresses the challenge of managing multiple large-scale Cisco UCS domains by providing streamlined management of up to 10.000 servers across hundreds of sites?

• A. Cisco UCS Central
• B. Cisco UCS Director
• C. Cisco UCS Domain Manager
• D. Cisco UCS Manager

Answer: A

Explanation: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-central-software/data_sheet_c

NEW QUESTION 7
You want to modify a service profile that is bound to an updating template. Which description of the relationship between the service profile and the updating template is true?

• A. The service profile is updated after the server reboots.
• B. The service profile is updated automatically when the updating template changes.
• C. Change to the updating template apply only to service profile created after template after the template is updated.
• D. The updating template can be changed only before the service profile is implemented

Answer: D

NEW QUESTION 8
In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

• A. allows reserve vNICs to be allocated out of the spares pool
• B. enables hardware-based failover
• C. enables static binding of the VM port profile to dynamic vNICs
• D. selects the primary fabric association for dynamic vNICs
• E. allows dynamic vNICs to be reserved for fabric failover

Answer: D

NEW QUESTION 9
Which options is the only supported link aggregation protocol on Cisco UCS Manager?

• A. Multipath
• B. PagP
• C. FLOGI
• D. LACP
• E. FCOE

Answer: D

Explanation: UCS port channel configuration is statically set to Link Aggregation Control Protocol (LACP) mode active. This configuration cannot be modified; therefore, all upstream port-channel configurations must adhere to
LACP mode active as well. Alternatively, you can configure the upstream switchports for LACP mode passive.
Reference:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116095-configure-ucsupstr

NEW QUESTION 10
What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series
server?

• A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabled
• B. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabled
• C. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabled
• D. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabled
• E. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled

Answer: D

NEW QUESTION 11
Which actions must be taken in order to connect a NetAppFCoE storage system to a Cisco UCS system?

• A. Ensure that the Fibre Channel switching mode is set to Switching, and use the Fibre Channel ports on the Fabric Interconnects.
• B. Ensure that the Fibre Channel switching mode is set to Switching, and reconfigure the port to aFCoE Storage port.
• C. Ensure that the Fibre Channel switching mode is set to End-Host, and use the Ethernet ports on the Fabric Interconnects.
• D. Ensure that the Fibre Channel switching mode is set to Switching, and use the Ethernet ports on the Fabric Interconnects.

Answer: A

Explanation: References:
http://www.renar.net/?p=148&lang=en https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/UCS_28313.html

NEW QUESTION 12
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager. Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.



Refer to the screenshot in Exhibit 5. Which of the following user roles allows the permission Clear All Logs?

• A. read-only
• B. user
• C. operator
• D. system

Answer: C

Explanation:
Reference:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/20/b_UCSM_GUI_Configura

NEW QUESTION 13
Which policy is used to specify how Cisco UCS Manager should proceed for configuration changes that will have a service impact?

• A. host firmware policy
• B. maintenance policy
• C. local disk policy
• D. BIOS policy

Answer: B

NEW QUESTION 14
Refer to the exhibit.

An admin is configuring VLANs on a Cisco UCS B-Series vNIC. Which two statements about the traffic coming from the operating system with this configuration are true? (Choose two.)

• A. The VLAN must be configured with ID 832 within the operating system.
• B. No VLAN tag should be added in the operating system.
• C. If traffic comes in untagged on this vNIC, it is placed in VLAN 832.
• D. This configuration is not supported when hypervisors are used.
• E. The uplink ports of the fabric interconnect have the native VLAN set to ID 832.

Answer: BC

NEW QUESTION 15
Refer to the exhibit.

Which result of the configuration is true?

• A. The usNIC replaces any vNICs in the server.
• B. The kernel is bypassed when sending networking packets.
• C. Device-specific DMA translations are cached on the fabric interconnect only
• D. All network traffic goes to the OS kernel directly.

Answer: D

NEW QUESTION 16
Which of the following is true with respect to hardware failover or NIC teaming within a Cisco Unified Computing System?

• A. Hardware failover is specified by the operating system.
• B. An uplink failure when using automatic pinning requires that hardware failover for the server vNIC be disabled.
• C. NIC teaming is controlled by the vNIC.
• D. The hardware failover option that is available for Ethernet does not affect Fibre Channel traffic.

Answer: D